DACPU / DACPD / DACP  UPGRADE Notes			8-7-1997

Readme.txt    -  This file
dac960fl.exe  -  DOS program for firmware upgrade
fwpd3514.myl -  binary file contains the firmware code

This release files of firmware version 3.51-0-4 are supported 
on models DACPU / DACPD / DACP only. 


** WARNING : IT IS ALWAYS RECOMMENDED TO BACKUP YOUR DATA BEFORE ANY
	     UPGRADE IS PERFORMED, UNEXPECTED LOSS OF DATA IS POSSIBLE
				   
   This firmware code is for DACPU / DACPD / DACP-MY4 models ( has 2 EEPROM 
   chips) controller ONLY. DO NOT USE on model DAC-PL or in any OEM 
   version of the controllers. 
	     
   Flashing the wrong firmware binary file will prevent the controller 
   from functioning and will require to return the controller to the 
   factory for repair.  

   This flash utilities will not work with -MY3 models controller. A -MY3 
   controller has version 2.x firmware with only 1 EEPROM chip.    **


UPGRADE procedure :

	Upgrade the firmware using the firmware flash utility DAC960FL.EXE 
	and appropriate firmware file under DOS. Make sure clean boot DOS 
	from floppy disk ( not inside Win95/NT DOS Windows ) and run the 
	upgrade program from diskette.
	
	A> DAC960FL FWPD3514.myl   
 

firmware and BIOS are programmed at the same time