ASKA TECHNOLOGIES
ASKA 2845 AT SUPER I/O INTERFACE CARD
| 
 Data Bus  | 
 16-bit ISA  | 
| 
 Card Size  | 
 Full height, three-quarters length  | 
| 
 Hard Drives Supported  | 
 Two IDE(AT) devices  | 
| 
 Floppy Drives Supported  | 
 Two 360KB or 720KB drives  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 10-pin serial port 1 - internal  | 
 CN1  | 
 15-pin game port - external  | 
 CN5  | 
| 
 10-pin serial port 2 - internal  | 
 CN2  | 
 10-pin bus mouse port  | 
 CN6  | 
| 
 40-pin IDE(AT) connector  | 
 CN3  | 
 25-pin parallel port - external  | 
 CN7  | 
| 
 34-pin cable connector - floppy drive  | 
 CN4  | 
 4-pin drive active LED  | 
 JP20  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Setting  | 
 Label  | 
 Position  | |
| » | 
 Floppy drive interface enabled  | 
 JP1  | 
 Pins 1 & 2 closed  | 
| 
 Floppy drive interface disabled  | 
 JP1  | 
 Pins 2 & 3 closed  | |
| » | 
 IDE(AT) interface enabled  | 
 JP4  | 
 Pins 1 & 2 closed  | 
| 
 IDE(AT) interface disabled  | 
 JP4  | 
 Pins 2 & 3 closed  | |
| » | 
 Parallel port address is 378h  | 
 JP5  | 
 Pins 1 & 2 closed  | 
| 
 Parallel port address is 278h  | 
 JP5  | 
 Pins 2 & 3 closed  | |
| » | 
 Serial port 1 address is 3F8h (COM1:)  | 
 JP6  | 
 Pins 1 & 2 closed  | 
| 
 Serial port 1 address is 3E8h (COM3:)  | 
 JP6  | 
 Pins 2 & 3 closed  | |
| » | 
 Serial port 2 address is 2F8h (COM2:)  | 
 JP7  | 
 Pins 1 & 2 closed  | 
| 
 Serial port 2 address is 2E8h (COM4:)  | 
 JP7  | 
 Pins 2 & 3 closed  | |
| » | 
 Serial port 2 enabled  | 
 JP8  | 
 Pins 1 & 2 closed  | 
| 
 Serial port 2 disabled  | 
 JP8  | 
 Pins 2 & 3 closed  | |
| » | 
 Serial port 1 enabled  | 
 JP9  | 
 Pins 1 & 2 closed  | 
| 
 Serial port 1 disabled  | 
 JP9  | 
 Pins 2 & 3 closed  | |
| » | 
 Parallel port enabled  | 
 JP10  | 
 Pins 1 & 2 closed  | 
| 
 Parallel port disabled  | 
 JP10  | 
 Pins 2 & 3 closed  | |
| » | 
 Hard drive is connected to IDE interface  | 
 JP12  | 
 Pins 1 & 2 closed  | 
| 
 Hard drive is not connected to IDE interface  | 
 JP12  | 
 Pins 2 & 3 closed  | |
| 
 USER CONFIGURABLE SETTINGS (CON’T)  | |||
| 
 Setting  | 
 Label  | 
 Position  | |
| » | 
 Bus mouse port enabled  | 
 JP13  | 
 Pins 1 & 2 closed  | 
| 
 Bus mouse port disabled  | 
 JP13  | 
 Pins 2 & 3 closed  | |
| » | 
 Game port enabled  | 
 JP14  | 
 Pins 1 & 2 closed  | 
| 
 Game port disabled  | 
 JP14  | 
 Pins 2 & 3 closed  | |
| » | 
 IDE IOCHRDY signal disabled  | 
 JP19  | 
 Open  | 
| 
 IDE IOCHRDY signal enabled  | 
 JP19  | 
 Closed  | |
| 
 BUS MOUSE INTERRUPT SELECTION  | ||||
| 
 Setting  | 
 JP15  | 
 JP16  | 
 JP17  | 
 JP18  | 
| 
 IR/FONT>  | 
 Open  | 
 Open  | 
 Open  | 
 Closed  | 
| 
 IRQ3  | 
 Open  | 
 Closed  | 
 Open  | 
 Open  | 
| 
 IRQ4  | 
 Closed  | 
 Open  | 
 Open  | 
 Open  | 
| 
 IRQ5  | 
 Open  | 
 Open  | 
 Closed  | 
 Open  | 
| 
 Note: If IRQ4 is selected, serial port 1 must be disabled. If IRQ3 is selected, serial port 2 must be disabled.  | ||||