Card Type	Hard drive controller card
Hard Drives supported	Two IDE (AT) drives
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	PC/104 Version 2
Form-factor	Compact PC/104

CONNECTIONS
Function	Location	Function	Location
PC/104 bus	CN4	40-pin IDE(AT) connector	J7
34-pin cable connector - floppy drive	J3	44-pin IDE(AT) connector	J8

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	IDE(AT) interface enabled	W1/A	Closed
	IDE(AT) interface disabled	W1/A	Open
»	Floppy drive interface enabled	W1/B	Closed
	Floppy drive interface disabled	W1/B	Open
»	Precomp value enabled	W1/C	Closed
	Precomp value disabled	W1/C	Open
»	Factory configured - (drive type)	W1/D	Closed
»	Factory configured - do not alter	W2	Unidentified