INTELLIGENT COMPUTER PERIPHERALS
GDT6110
| 
 Maximum Onboard Memory  | 
 32MB  | 
| 
 Data Bus  | 
 32-bit PCI  | 
| 
 Card Size  | 
 Full-height, half-length card  | 
| 
 Hard Drives Supported  | 
 Up to 7 SCSI devices  | 
| 
 Floppy Drives Supported  | 
 None  | 
| 
 RAID Levels Supported  | 
 RAID 0, 1  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 50-pin SCSI connector - external  | 
 J1  | 
 4-pin connector - drive active LED  | 
 J3  | 
| 
 50-pin SCSI connector - internal  | 
 J2  | 
 RAID GAL  | 
 U1  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Label  | 
 Position  | |
| » | 
 Active termination power enabled  | 
 W1  | 
 Closed  | 
| 
 Active termination power disabled  | 
 W1  | 
 Open  | |
| 
 DRAM CONFIGURATION  | |
| 
 Size  | 
 Bank 0  | 
| 
 2MB  | 
 (1) 512K x 32  | 
| 
 4MB  | 
 (1) 1M x 32  | 
| 
 8MB  | 
 (1) 2M x 32  | 
| 
 16MB  | 
 (1) 4M x 32  | 
| 
 32MB  | 
 (1) 8M x 32  | 
| 
 DIAGNOSTIC LED(S)  | |||
| 
 LED  | 
 Color  | 
 Status  | 
 Condition  | 
| 
 T  | 
 Green  | 
 On  | 
 Direct memory access is in progress  | 
| 
 T  | 
 Green  | 
 Off  | 
 Direct memory access is not in progress  | 
| 
 A  | 
 Yellow  | 
 On  | 
 SCSI bus is active  | 
| 
 A  | 
 Yellow  | 
 Off  | 
 SCSI bus is not active  | 
| 
 S  | 
 Green  | 
 On  | 
 Card is operating normally  | 
| 
 S  | 
 Green  | 
 Off  | 
 An error has occurred  |