KINGSTON TECHNOLOGY CORPORATION
KTM-DCAT/127, KTM-DCAT/209, KTM-DCAT/260,
KTM-DCAT/340
| 
 Card Type  | 
 Memory card, Fixed hard drive, Hard drive controller card  | 
| 
 Maximum Onboard Memory  | 
 16MB DRAM  | 
| 
 Hard Drives supported  | 
 One fixed proprietary drive  | 
| 
 Data Bus  | 
 16-bit ISA  | 
| 
 Card Size  | 
 Full-length, full-height card  | 
| 
 CONNECTIONS  | |
| 
 Function  | 
 Label  | 
| 
 Proprietary hard drive interface  | 
 CN1  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Label  | 
 Position  | |
| » | 
 Memory disabled  | 
 SW1/1  | 
 On  | 
| 
 Memory enabled  | 
 SW1/1  | 
 Off  | |
| » | 
 Card is first memory board in PC  | 
 SW1/2  | 
 On  | 
| 
 Card is second memory board in PC  | 
 SW1/2  | 
 Off  | |
| » | 
 Factory configured - do not alter.  | 
 SW1/3  | 
 On  | 
| » | 
 Parity checking enabled  | 
 SW1/6  | 
 On  | 
| 
 Parity checking disabled  | 
 SW1/6  | 
 Off  | |
| 
 ROM ADDRESS SELECT  | |||
| 
 Address  | 
 SW1/4  | 
 SW1/5  | |
| » | 
 C800h (non-bootable)  | 
 On  | 
 On  | 
| 
 CC00h (non-bootable)  | 
 Off  | 
 On  | |
| 
 D800h (non-bootable)  | 
 On  | 
 Off  | |
| 
 DC00h (bootable)  | 
 Off  | 
 Off  | |
| 
 BANK 1 DRAM CONFIGURATION  | ||
| 
 Size  | 
 SW2/1  | 
 SW2/2  | 
| 
 No SIMMs installed  | 
 On  | 
 On  | 
| 
 2MB ((2) x 1MB )  | 
 Off  | 
 On  | 
| 
 8MB ((2) x 4MB)  | 
 Off  | 
 Off  | 
| 
 Note: Bank 1 is market as P1 and P2 on the card (exact location unidentified). Bank 1 must be filled first before memory in Bank 2 can be detected.  | ||
| 
 BANK 2 DRAM CONFIGURATION  | ||
| 
 Size  | 
 SW2/1  | 
 SW2/2  | 
| 
 No SIMMs installed  | 
 On  | 
 On  | 
| 
 2MB ((2) x 1MB )  | 
 Off  | 
 On  | 
| 
 8MB ((2) x 4MB)  | 
 Off  | 
 Off  | 
| 
 Note: Bank 2 is market as P3 and P4 on the card (exact location unidentified). Bank 1 must be filled first before memory in Bank 2 can be detected.  | ||