PINE TECHNOLOGY
PT-606
| 
 
  | |
| 
 Data bus:  | 
 16-bit, ISA  | 
| 
 Size:  | 
 Half-length, full-height card  | 
| 
 Hard drive supported:  | 
 Two IDE(AT) interface drives  | 
| 
 Floppy drives supported:  | 
 Two 360KB, 720KB, 1.2MB, or 1.44MB drives  | 
| 
 CONNECTIONS  | |
| 
 Function  | 
 Location  | 
| 
 15-pin game port - internal  | 
 CN1  | 
| 
 40-pin IDE(AT) interface connector  | 
 CN2  | 
| 
 34-pin control cable connector - floppy drive  | 
 CN3  | 
| 
 9-pin serial port (COM1/3) - external  | 
 CN4  | 
| 
 9-pin serial port (COM2/4) - internal  | 
 CN5  | 
| 
 25-pin parallel port (LPT2/3) - external  | 
 CN6  | 
| 
 4-pin connector - drive active LED  | 
 J2  | 
| 
 PARALLEL PORT CONFIGURATION  | |||
| 
 LPT  | 
 JP1  | 
 JP8  | |
| » | 
 LPT2  | 
 pins 1 & 2 closed  | 
 pins 1 & 2 closed  | 
| 
 LPT3  | 
 pins 1 & 2 closed  | 
 pins 2 & 3 closed  | |
| 
 LPT2 Disabled  | 
 pins 2 & 3 closed  | 
 pins 1 & 2 closed  | |
| 
 LPT3 Disabled  | 
 pins 2 & 3 closed  | 
 pins 2 & 3 closed  | |
| 
 SERIAL PORT CONFIGURATION  | ||||||
| 
 Port 1 (CN4)  | 
 Port 2 (CN5)  | 
 JP2  | 
 JP3  | 
 JP4  | 
 JP5  | |
| » | 
 COM1  | 
 COM2  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
| 
 COM1  | 
 COM4  | 
 pins 1 & 2  | 
 pins 2 & 3  | 
 pins 1 & 2  | 
 pins 1 & 2  | |
| 
 COM3  | 
 COM2  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
 pins 2 & 3  | 
 pins 1 & 2  | |
| 
 COM3  | 
 COM4  | 
 pins 1 & 2  | 
 pins 2 & 3  | 
 pins 2 & 3  | 
 pins 1 & 2  | |
| 
 COM1  | 
 Disabled  | 
 pins 2 & 3  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
 pins 1 & 2  | |
| 
 COM1  | 
 Disabled  | 
 pins 2 & 3  | 
 pins 2 & 3  | 
 pins 1 & 2  | 
 pins 1 & 2  | |
| 
 COM3  | 
 Disabled  | 
 pins 2 & 3  | 
 pins 1 & 2  | 
 pins 2 & 3  | 
 pins 1 & 2  | |
| 
 COM3  | 
 Disabled  | 
 pins 2 & 3  | 
 pins 2 & 3  | 
 pins 2 & 3  | 
 pins 1 & 2  | |
| 
 Disabled  | 
 COM2  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
 pins 2 & 3  | |
| 
 Disabled  | 
 COM4  | 
 pins 1 & 2  | 
 pins 2 & 3  | 
 pins 1 & 2  | 
 pins 2 & 3  | |
| 
 Disabled  | 
 COM2  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
 pins 2 & 3  | 
 pins 2 & 3  | |
| 
 Disabled  | 
 COM4  | 
 pins 1 & 2  | 
 pins 2 & 3  | 
 pins 2 & 3  | 
 pins 2 & 3  | |
| 
 Disabled  | 
 Disabled  | 
 pins 2 & 3  | 
 pins 1 & 2  | 
 pins 1 & 2  | 
 pins 2 & 3  | |
| 
 Disabled  | 
 Disabled  | 
 pins 2 & 3  | 
 pins 2 & 3  | 
 pins 1 & 2  | 
 pins 2 & 3  | |
| 
 Disabled  | 
 Disabled  | 
 pins 2 & 3  | 
 pins 1 & 2  | 
 pins 2 & 3  | 
 pins 2 & 3  | |
| 
 Disabled  | 
 Disabled  | 
 pins 2 & 3  | 
 pins 2 & 3  | 
 pins 2 & 3  | 
 pins 2 & 3  | |
| 
 Note: All pins designated should be in the closed position.  | ||||||
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Location  | 
 Setting  | |
| » | 
 Hard drive enabled  | 
 JP6  | 
 pins 1 & 2 closed  | 
| 
 Hard drive disabled  | 
 JP6  | 
 pins 2 & 3 closed  | |
| » | 
 Game port enabled  | 
 JP7  | 
 pins 1 & 2 closed  | 
| 
 Game port disabled  | 
 JP7  | 
 pins 2 & 3 closed  | |
| » | 
 Floppy drive interface enabled  | 
 JP9  | 
 pins 1 & 2 closed  | 
| 
 Floppy drive interface disabled  | 
 JP9  | 
 pins 2 & 3 closed  | |
| » | 
 Hard drive controller installation exists  | 
 JP10  | 
 pins 1 & 2 closed  | 
| 
 Hard drive controller installation does not exist  | 
 JP10  | 
 pins 2 & 3 closed  | |