PC WARE INTERNATIONAL, INC.
V-U418FR VIO
| 
 
  | |
| 
 Data bus:  | 
 32-bit, VL-bus  | 
| 
 Size:  | 
 Three/quarter-length, full-height card  | 
| 
 Hard drive supported:  | 
 Two IDE (AT) Interface drives  | 
| 
 Floppy drives supported:  | 
 Two 360KB, 720KB, 1.2MB, or 1.44MB drives  | 
| 
 CONNECTIONS  | |
| 
 Function  | 
 Location  | 
| 
 40-pin IDE(AT) Interface connector  | 
 CN1  | 
| 
 34-pin control cable connector - floppy drive  | 
 CN2  | 
| 
 16-pin game port - internal  | 
 CN3  | 
| 
 10-pin serial port 1 (COM1/3) - internal  | 
 CN4  | 
| 
 10-pin serial port 2 (COM2/4) - internal  | 
 CN5  | 
| 
 26-pin VESA video feature connector - internal  | 
 CN6  | 
| 
 15-pin VGA analog video port - external  | 
 CN7  | 
| 
 25-pin parallel port (LPT2/3) - external  | 
 CN8  | 
| 
 2-pin connector - Drive active LED  | 
 JP3  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Location  | 
 Setting  | |
| » | 
 Hard drive port address is 170-177h  | 
 JP4  | 
 open  | 
| 
 Hard drive port address is 1F0-1F7h  | 
 JP4  | 
 closed  | |
| » | 
 Hard drive disabled  | 
 JP5  | 
 open  | 
| 
 Hard drive enabled  | 
 JP5  | 
 closed  | |
| » | 
 VGA port Interrupt Request IRQ9 disabled  | 
 JP9  | 
 open  | 
| 
 VGA port Interrupt Request IRQ9 enabled  | 
 JP9  | 
 closed  | |
| » | 
 BIOS enabled  | 
 JP10  | 
 pins 1 & 2 closed  | 
| 
 BIOS disabled  | 
 JP10  | 
 pins 2 & 3 closed  | |
| » | 
 Parallel port (CN8) enabled  | 
 JP13  | 
 pins 1 & 2 closed  | 
| 
 Parallel port (CN8) disabled  | 
 JP13  | 
 pins 2 & 3 closed  | |
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Location  | 
 Setting  | |
| » | 
 Serial Port 1 (CN4) enabled  | 
 JP14  | 
 pins 1 & 2 closed  | 
| 
 Serial Port 1 (CN4) disabled  | 
 JP14  | 
 pins 2 & 3 closed  | |
| » | 
 Serial Port 2 (CN5) enabled  | 
 JP15  | 
 pins 1 & 2 closed  | 
| 
 Serial Port 2 (CN5) disabled  | 
 JP15  | 
 pins 2 & 3 closed  | |
| » | 
 Floppy drive enabled  | 
 JP16  | 
 pins 1 & 2 closed  | 
| 
 Floppy drive disabled  | 
 JP16  | 
 pins 2 & 3 closed  | |
| » | 
 Game Port (CN3) enabled  | 
 JP17  | 
 pins 1 & 2 closed  | 
| 
 Game Port (CN3) disabled  | 
 JP17  | 
 pins 2 & 3 closed  | |
| » | 
 Parallel port (CN8) is set to LPT2  | 
 JP18  | 
 pins 1 & 2 closed  | 
| 
 Parallel port (CN8) is set to LPT3  | 
 JP18  | 
 pins 2 & 3 closed  | |
| » | 
 Serial Port 1 (CN4) is set to COM1  | 
 JP19  | 
 pins 1 & 2 closed  | 
| 
 Serial Port 1 (CN4) is set to COM3  | 
 JP19  | 
 pins 2 & 3 closed  | |
| » | 
 Serial Port 2 (CN5) is set to COM2  | 
 JP20  | 
 pins 1 & 2 closed  | 
| 
 Serial Port 2 (CN5) is set to COM4  | 
 JP20  | 
 pins 2 & 3 closed  | |
| » | 
 Hard drive controller installation does not exist  | 
 JP21  | 
 pins 2 & 3 closed  | 
| 
 Hard drive controller installation exists  | 
 JP21  | 
 pins 1 & 2 closed  | |
| 
 GREEN PC SPECIFICATIONS CONFIGURATION  | ||||
| 
 Active/Cycle  | 
 JP6  | 
 JP7  | 
 JP8  | |
| » | 
 18/37  | 
 pins 2 & 3 closed  | 
 pins 2 & 3 closed  | 
 pins 2 & 3 closed  | 
| 
 15/30  | 
 pins 1 & 2 closed  | 
 pins 1 & 2 closed  | 
 pins 1 & 2 closed  | |
| 
 15/19  | 
 pins 2 & 3 closed  | 
 pins 1 & 2 closed  | 
 pins 1 & 2 closed  | |
| 
 9/13  | 
 pins 1 & 2 closed  | 
 pins 2 & 3 closed  | 
 pins 1 & 2 closed  | |
| 
 18/37  | 
 pins 2 & 3 closed  | 
 pins 2 & 3 closed  | 
 pins 1 & 2 closed  | |
| 
 10/20  | 
 pins 1 & 2 closed  | 
 pins 1 & 2 closed  | 
 pins 2 & 3 closed  | |
| 
 10/14  | 
 pins 2 & 3 closed  | 
 pins 1 & 2 closed  | 
 pins 2 & 3 closed  | |
| 
 5/9  | 
 pins 1 & 2 closed  | 
 pins 2 & 3 closed  | 
 pins 2 & 3 closed  | |
| 
 BIOS ADDRESS  | |||
| 
 Address  | 
 JP11  | 
 JP12  | |
| » | 
 DC00h  | 
 open  | 
 open  | 
| 
 DB00h  | 
 closed  | 
 open  | |
| 
 CC00h  | 
 open  | 
 closed  | |
| 
 CB0Ch  | 
 closed  | 
 closed  | |