STORAGE DIMENSIONS
LANSTOR PCI RAIDCARD
| 
 Card Type  | 
 Hard drive controller  | 
| 
 Processor  | 
 Intel i960CA  | 
| 
 Chipset:  | 
 Unidentified  | 
| 
 Maximum On Board Memory  | 
 32MB  | 
| 
 Hard Drives Supported  | 
 Up to 14 SCSI-2 Wide,Fast devices  | 
| 
 Floppy Drives Supported  | 
 None  | 
| 
 Data Bus  | 
 32-bit PCI  | 
| 
 Card Size  | 
 Full length, full height  | 
| 
 Raid Levels Supported  | 
 0,1,3,5,6,7  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Location  | 
 Function  | 
 Location  | 
| 
 68-pin SCSI Wide/Fast connector channel 0 - external  | 
 CN1  | 
 68-pin SCSI Wide/Fast connector channel 1 - internal  | 
 CN4  | 
| 
 68-pin SCSI Wide/Fast connector channel 1 - external  | 
 CN2  | 
 Unidentified  | 
 J1  | 
| 
 68-pin SCSI Wide/Fast connector channel 0 - internal  | 
 CN3  | 
 Unidentified  | 
 J2  | 
| 
 TERMINATION POWER SELECTION FOR CHANNEL 0  | |
| 
 Setting  | 
 JP4  | 
| 
 Enabled  | 
 Closed  | 
| 
 Disabled  | 
 Open  | 
| 
 TERMINATION POWER SELECTION FOR CHANNEL 1  | |
| 
 Setting  | 
 JP6  | 
| 
 Enabled  | 
 Closed  | 
| 
 Disabled  | 
 Open  | 
| 
 DRAM CONFIGURATION  | |
| 
 Size  | 
 Bank 0  | 
| 
 4MB  | 
 (1) 1M x 36  | 
| 
 8MB  | 
 (1) 2M x 36  | 
| 
 16MB  | 
 (1) 4M x 36  | 
| 
 32MB  | 
 (1) 8M x 36  | 
Continue on next page . . .
STORAGE DIMENSIONS
LANSTOR PCI RAIDCARD
. . . continued from previous page
| 
 STATUS LED(S)  | |||
| 
 JP6  | 
 Color  | 
 Status  | 
 Condition  | 
| 
 Pins 1 & 2  | 
 Unidentified  | 
 On  | 
 One or more SCSI channels is transmitting or receiving data.  | 
| 
 Pins 3 & 4  | 
 Unidentified  | 
 On  | 
 The controller is transmitting or receiving data to or from the host system.  | 
| 
 Pins 5 & 6  | 
 Unidentified  | 
 On  | 
 The memory on the controller holds data that is more current than the data in the hard drive.  | 
| 
 Note:JP6 provides connection for 3 status LED. Location of pin 1 is unidentified.  | |||