ADVANCED COMPUTER TECHNOLOGY, LTD.
LAT-25/4M, LAT-16/4M, LAT-12/4M
| 
 Processor  | 
 80286  | 
| 
 Processor Speed  | 
 12/16/25MHz  | 
| 
 Chip Set  | 
 ACT  | 
| 
 Max. Onboard DRAM  | 
 4MB  | 
| 
 Cache  | 
 None  | 
| 
 BIOS  | 
 AMI  | 
| 
 Dimensions  | 
 330mm x 218mm  | 
| 
 I/O Options  | 
 None  | 
| 
 NPU Options  | 
 80287  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 Turbo LED  | 
 JP2  | 
 External battery  | 
 JP11  | 
| 
 Power LED & Keylock  | 
 JP7  | 
 Speaker  | 
 JP14  | 
| 
 Reset switch  | 
 JP10  | 
 Turbo switch  | 
 JP19  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Jumper/Switch  | 
 Position  | |
| » | 
 Factory configured - do not alter  | 
 JP4  | 
 N/A  | 
| » | 
 BIOS type select 27256  | 
 JP6  | 
 pins 1 & 2 closed  | 
| 
 ROM type select 27512  | 
 JP6  | 
 pins 2 & 3 closed  | |
| » | 
 Factory configured - do not alter  | 
 JP8  | 
 N/A  | 
| » | 
 Monitor type select color  | 
 JP9  | 
 pins 2 & 3 closed  | 
| 
 Monitor type select monochrome  | 
 JP9  | 
 pins 1 & 2 closed  | |
| » | 
 Battery select internal  | 
 JP12  | 
 pins 2 & 3 closed  | 
| 
 Battery select external  | 
 JP12  | 
 pins 1 & 2 closed  | |
| » | 
 Power good signal detect from power supply  | 
 JP13  | 
 pins 1 & 2 closed  | 
| 
 Power good signal detect from board  | 
 JP13  | 
 pins 2 & 3 closed  | |
| » | 
 Factory configured - do not alter  | 
 JP15  | 
 N/A  | 
| » | 
 Factory configured - do not alter  | 
 JP16  | 
 N/A  | 
| » | 
 Bus speed select 8MHz  | 
 JP17  | 
 pins 1 & 2 closed  | 
| 
 Bus speed select 6MHz  | 
 JP17  | 
 pins 2 & 3 closed  | |
| » | 
 Factory configured - do not alter  | 
 JP18  | 
 N/A  | 
| » | 
 Parity check enabled  | 
 JP20  | 
 pins 1 & 2 closed  | 
| 
 Parity check disabled  | 
 JP20  | 
 pins 2 & 3 closed  | |
| » | 
 Factory configured - do not alter  | 
 JP21  | 
 N/A  | 
| » | 
 Factory configured - do not alter  | 
 JP22  | 
 N/A  | 
| » | 
 RAM speed select 0 wait states  | 
 SW1/4  | 
 Off  | 
| 
 RAM speed select 1 wait state  | 
 SW1/4  | 
 On  | |
| 
 Note:SW1/4 must be on for the LAT-25/4M model.  | |||
| 
 DRAM CONFIGURATION  | ||||||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
 Bank 2  | 
 Bank 3  | 
 P-0  | 
 P-1  | 
| 
 512KB  | 
 (4) 44256  | 
 NONE  | 
 NONE  | 
 NONE  | 
 (2) 41256  | 
 NONE  | 
| 
 512KB  | 
 NONE  | 
 NONE  | 
 (2) 256K x 9  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 640KB  | 
 (4) 44256  | 
 (4) 4464  | 
 NONE  | 
 NONE  | 
 (2) 41256  | 
 (2) 4164  | 
| 
 640KB  | 
 NONE  | 
 (4) 4464  | 
 (2) 256K x 9  | 
 NONE  | 
 NONE  | 
 (2) 4164  | 
| 
 1MB  | 
 (4) 44256  | 
 (4) 44256  | 
 NONE  | 
 NONE  | 
 (2) 41256  | 
 (2) 41256  | 
| 
 1MB  | 
 (4) 44256  | 
 NONE  | 
 NONE  | 
 (2) 256K x 9  | 
 (2) 41256  | 
 NONE  | 
| 
 1MB  | 
 NONE  | 
 NONE  | 
 (2) 256K x 9  | 
 (2) 256K x 9  | 
 NONE  | 
 NONE  | 
| 
 2MB  | 
 NONE  | 
 NONE  | 
 (2) 1MBx 9  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 4MB  | 
 NONE  | 
 NONE  | 
 (2) 1MBx 9  | 
 (2) 1MBx 9  | 
 NONE  | 
 NONE  | 
| 
 DRAM SWITCH CONFIGURATION  | |||
| 
 Size  | 
 SW1/1  | 
 SW1/2  | 
 SW1/3  | 
| 
 512KB  | 
 On  | 
 On  | 
 On  | 
| 
 640KB  | 
 On  | 
 Off  | 
 Off  | 
| 
 1MB  | 
 On  | 
 Off  | 
 On  | 
| 
 2MB  | 
 Off  | 
 On  | 
 On  | 
| 
 4MB  | 
 Off  | 
 Off  | 
 On  |