COMPAQ COMPUTER CORPORATION
PROLIANT 1600
| 
 Device Type  | 
 Mainboard  | 
| 
 Processor  | 
 Pentium II  | 
| 
 Processor Speed  | 
 266/300/333MHz  | 
| 
 Chip Set  | 
 Unidentified  | 
| 
 Video Chip Set  | 
 Unidentified  | 
| 
 Maximum Onboard Memory  | 
 512MB (EDO supported)  | 
| 
 Maximum Video Memory  | 
 Unidentified  | 
| 
 Cache  | 
 256/512KB (located on Pentium II CPU)  | 
| 
 BIOS  | 
 Unidentified  | 
| 
 Dimensions  | 
 254mm x 218mm  | 
| 
 I/O Options (I/O board)  | 
 32-bit PCI slots (6), parallel port, PS/2 mouse port, serial ports (2)  | 
| 
 I/O Options (processor board)  | 
 Ethernet 10Base5 connector, Ethernet 10BaseT connector, SCSI interface, VGA port, memory slot  | 
| 
 NPU Options  | 
 None  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 Speaker  | 
 C1  | 
 Parallel port  | 
 CN3  | 
| 
 Battery jumper  | 
 C2  | 
 Serial port 2  | 
 CN4  | 
| 
 External battery  | 
 C3  | 
 Parallel port connector  | 
 CN5  | 
| 
 PS/2 mouse port  | 
 CN1  | 
 I2O connector  | 
 CN6  | 
| 
 Serial port 1  | 
 CN2  | 
 32-bit PCI slots  | 
 PC1 – PC6  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Label  | 
 Position  | |
| 
 »  | 
 On board video enabled  | 
 SW1/1  | 
 Off  | 
| 
 On board video disabled  | 
 SW1/1  | 
 On  | |
| 
 »  | 
 Setup access enabled  | 
 SW1/2  | 
 Off  | 
| 
 Setup access disabled  | 
 SW1/2  | 
 On  | |
| 
 »  | 
 System setup in a tower  | 
 SW1/3  | 
 Off  | 
| 
 System setup in a rack mount  | 
 SW1/3  | 
 On  | |
| 
 »  | 
 Floppy drive boot enabled  | 
 SW1/4  | 
 Off  | 
| 
 Floppy drive boot disabled  | 
 SW1/4  | 
 On  | |
| 
 »  | 
 Password normal operation  | 
 SW1/5  | 
 Off  | 
| 
 Password clear  | 
 SW1/5  | 
 On  | |
| 
 »  | 
 NVRAM is validated, configuration not lost  | 
 SW1/6  | 
 Off  | 
| 
 NVRAM is invalidated, configuration is lost  | 
 SW1/6  | 
 On  | |
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 CPU fan power  | 
 C1  | 
 Link LED  | 
 L2  | 
| 
 SCSI interface  | 
 CN1  | 
 Active LED  | 
 L3  | 
| 
 Ethernet 10BaseT connector  | 
 CN2  | 
 Memory card slot  | 
 SL1  | 
| 
 Ethernet 10Base5 connector  | 
 CN3  | 
 CPU slot 1  | 
 SL2  | 
| 
 VGA port  | 
 CN4  | 
 CPU slot 2  | 
 SL3  | 
| 
 Speed LED  | 
 L1  | ||
| 
 DIMM CONFIGURATION  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 32MB  | 
 (2) 2M x 64  | 
 None  | 
| 
 64MB  | 
 (2) 4M x 64  | 
 None  | 
| 
 96MB  | 
 (2) 2M x 64  | 
 (2) 4M x 64  | 
| 
 128MB  | 
 (2) 8M x 64  | 
 None  | 
| 
 160MB  | 
 (2) 2M x 64  | 
 (2) 8M x 64  | 
| 
 DIMM CONFIGURATION (CON’T)  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 192MB  | 
 (2) 8M x 64  | 
 (2) 4M x 64  | 
| 
 256MB  | 
 (2) 16M x 64  | 
 None  | 
| 
 256MB  | 
 (2) 8M x 64  | 
 (2) 8M x 64  | 
| 
 288MB  | 
 (2) 2M x 64  | 
 (2) 16M x 64  | 
| 
 320MB  | 
 (2) 16M x 64  | 
 (2) 4M x 64  | 
| 
 384MB  | 
 (2) 16M x 64  | 
 (2) 8M x 64  | 
| 
 512MB  | 
 (2) 16M x 64  | 
 (2) 16M x 64  | 
| 
 Note: Board accepts EDO memory. Above configuration is for the onboard memory. The maximum memory available on the memory card is unidentified.  | ||
| 
 CACHE CONFIGURATION  | 
| 
 Note: 256KB/512KB cache is located on the Pentium II CPU.  | 
| 
 VIDEO MEMORY CONFIGURATION  | 
| 
 Note: The size and location of the video memory is unidentified.  | 
| 
 CPU SPEED SELECTION  | ||||||
| 
 CPU speed  | 
 Clock speed  | 
 Multiplier  | 
 SW1/1  | 
 SW1/2  | 
 SW1/3  | 
 SW1/4  | 
| 
 266MHz  | 
 66MHz  | 
 4x  | 
 Off  | 
 On  | 
 On  | 
 Off  | 
| 
 300MHz  | 
 66MHz  | 
 4.5x  | 
 Off  | 
 Off  | 
 On  | 
 Off  | 
| 
 333MHz  | 
 66MHz  | 
 5x  | 
 Off  | 
 On  | 
 Off  | 
 Off  |