HYUNDAI ELECTRONICS, INC.
SUPER-386D/33L
| 
 Processor  | 
 80386DX  | 
| 
 Processor Speed  | 
 33MHz  | 
| 
 Chip Set  | 
 C & T  | 
| 
 Max. Onboard DRAM  | 
 32MB  | 
| 
 Cache  | 
 32/64KB  | 
| 
 BIOS  | 
 C & T  | 
| 
 Dimensions  | 
 330mm x 218mm  | 
| 
 I/O Options  | 
 Bus mouse port, floppy drive interface, IDE interface, serial port, parallel port, TTL video port, VGA port  | 
| 
 NPU Options  | 
 80387/3167  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 Bus mouse port  | 
 J2  | 
 Speaker  | 
 J9  | 
| 
 Parallel port  | 
 J3  | 
 Reset  | 
 J10  | 
| 
 Serial port  | 
 J4  | 
 Turbo switch  | 
 J12  | 
| 
 Floppy drive interface  | 
 J5  | 
 Riser card  | 
 R1  | 
| 
 IDE interface  | 
 J6  | 
 VGA port  | 
 VJ1  | 
| 
 IDE interface LED  | 
 J8  | 
 TTL video port  | 
 VJ3  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Jumper  | 
 Position  | |
| » | 
 82C710 enabled  | 
 W1  | 
 Open  | 
| 
 82C710 disabled  | 
 W1  | 
 pins 1 & 2 closed  | |
| » | 
 Floppy drive type select single speed  | 
 W2  | 
 Open  | 
| 
 Floppy drive type select dual speed  | 
 W2  | 
 pins 1 & 2 closed  | |
| » | 
 Floppy drive precompensation select normal  | 
 W3  | 
 pins 1 & 2 closed  | 
| 
 Floppy drive precompensation select alternate  | 
 W3  | 
 Open  | |
| » | 
 Korean font controlled by ATI28800  | 
 W4  | 
 pins 1 & 2 closed  | 
| 
 Korean font controlled by discrete logic  | 
 W4  | 
 pins 2 & 3 closed  | |
| » | 
 Korean font EPROM CA18 from FDBK of ATI28800  | 
 W6  | 
 pins 2 & 3 closed  | 
| 
 Korean font EPROM CA18 from OE1B of ATI28800  | 
 W6  | 
 pins 1 & 2 closed  | |
| » | 
 Monitor type select monochrome  | 
 W7  | 
 Open  | 
| 
 Monitor type select color  | 
 W7  | 
 pins 1 & 2 closed  | |
| » | 
 CMOS memory normal operation  | 
 W8  | 
 pins 2 & 3 closed  | 
| 
 CMOS memory clear  | 
 W8  | 
 pins 1 & 2 closed  | |
| » | 
 IDE interface pin 34 select FLOAT  | 
 W9  | 
 pins 1 & 2 closed  | 
| 
 IDE interface pin 34 select GROUND  | 
 W9  | 
 Open  | |
| » | 
 Factory configured - do not alter  | 
 W10  | 
 pins 1 & 2 closed  | 
| » | 
 Factory configured - do not alter  | 
 W11  | 
 pins 1 & 2 closed  | 
| » | 
 Bank 2 RAS select RAS1  | 
 W13  | 
 pins 1 & 2 closed  | 
| 
 Bank 2 RAS select RAS2  | 
 W13  | 
 pins 2 & 3 closed  | |
| 
 Note:All jumper locations are unidentified.  | |||
| 
 DRAM CONFIGURATION  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 4MB  | 
 (4) 1M x 9  | 
 NONE  | 
| 
 8MB  | 
 (4) 1M x 9  | 
 (4) 1M x 9  | 
| 
 16MB  | 
 (4) 4M x 9  | 
 NONE  | 
| 
 32MB  | 
 (4) 4M x 9  | 
 (4) 4M x 9  | 
| 
 CACHE CONFIGURATION  | ||
| 
 Size  | 
 Bank 0  | 
 TAG  | 
| 
 32KB  | 
 NONE  | 
 NONE  | 
| 
 64KB  | 
 (4) 8K x 8  | 
 (1) 8K x 8  | 
| 
 Note:The mainboard comes with 32KB of cache memory soldered to the board. The location of the factory installed 32KB of SRAM is unidentified. Locations of W11 and W14 are unknown.  | ||
| 
 CACHE JUMPER CONFIGURATION  | ||
| 
 Size  | 
 W11  | 
 W14  | 
| 
 32KB  | 
 Open  | 
 Open  | 
| 
 64KB  | 
 pins 1 & 2 closed  | 
 pins 1 & 2 closed  | 
| 
 VIDEO CONFIGURATION  | ||
| 
 Setting  | 
 W4  | 
 W5  | 
| 
 On board enabled  | 
 pins 1 & 2 closed  | 
 Closed  | 
| 
 On board disabled  | 
 Closed  | 
 pins 1 & 2 closed  | 
| 
 VIDEO MEMORY CONFIGURATION  | |
| 
 Size  | 
 Video  | 
| 
 256KB  | 
 NONE  | 
| 
 512KB  | 
 (2) 44256  | 
| 
 Note:The mainboard comes with 256KB of video memory soldered to the board. The location is unidentified.  | |