FIRST INTERNATIONAL COMPUTER, INC.
PN-6010
| 
 Device Type  | 
 Mainboard  | 
| 
 Processor  | 
 Pentium Pro  | 
| 
 Processor Speed  | 
 150/166/180/200MHz  | 
| 
 Chip Set  | 
 Intel  | 
| 
 Video Chip Set  | 
 None  | 
| 
 Maximum Onboard Memory  | 
 512MB (EDO supported)  | 
| 
 Maximum Video Memory  | 
 None  | 
| 
 Cache  | 
 256/512KB (located on Pentium Pro CPU)  | 
| 
 BIOS  | 
 Unidentified  | 
| 
 Dimensions  | 
 305mm x 244mm  | 
| 
 I/O Options  | 
 32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, VRM connector, USB connectors (2), ATX power connector  | 
| 
 NPU Options  | 
 None  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 ATX power connector  | 
 ATX  | 
 USB connector 1  | 
 CN3  | 
| 
 Power LED & keylock  | 
 C1/pins 1 - 5  | 
 PS/2 mouse port  | 
 CN4  | 
| 
 Turbo LED  | 
 C1/pins 6 & 7  | 
 Serial port 1  | 
 CN5  | 
| 
 Green PC connector  | 
 C1/pins 8 & 9  | 
 Serial port 2  | 
 CN6  | 
| 
 Green PC LED  | 
 C1/pins 10 & 11  | 
 IDE interface 1  | 
 CN7  | 
| 
 Speaker  | 
 C1/pins 12 - 15  | 
 IDE interface 2  | 
 CN8  | 
| 
 IDE interface LED  | 
 C1/pins 16 & 17  | 
 Floppy drive interface  | 
 CN9  | 
| 
 Soft off power supply  | 
 C1/pins 18 & 19  | 
 CPU fan power  | 
 CPU  | 
| 
 Reset switch  | 
 C1/pins 20 & 21  | 
 IR connector  | 
 IR1  | 
| 
 Parallel port  | 
 CN1  | 
 32-bit PCI slots  | 
 PC1 – PC4  | 
| 
 USB connector 2  | 
 CN2  | 
 Remote wake up connector  | 
 RPW  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Label  | 
 Position  | |
| 
 »  | 
 Password normal operation  | 
 CPS  | 
 Open  | 
| 
 Password clear  | 
 CPS  | 
 Closed  | |
| 
 »  | 
 Flash BIOS voltage select 5v  | 
 EP1  | 
 Pins 2 & 3 closed  | 
| 
 Flash BIOS voltage select 12v  | 
 EP1  | 
 Pins 1 & 2 closed  | |
| 
 »  | 
 Power supply type select ATX  | 
 VR1  | 
 Open  | 
| 
 Power supply type select AT  | 
 VR1  | 
 Pins 1 & 2, 3 & 4 closed  | |
| 
 SIMM CONFIGURATION  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 8MB  | 
 (2) 1M x 36  | 
 None  | 
| 
 16MB  | 
 (2) 2M x 36  | 
 None  | 
| 
 16MB  | 
 (2) 1M x 36  | 
 (2) 1M x 36  | 
| 
 24MB  | 
 (2) 2M x 36  | 
 (2) 1M x 36  | 
| 
 32MB  | 
 (2) 4M x 36  | 
 None  | 
| 
 32MB  | 
 (2) 2M x 36  | 
 (2) 2M x 36  | 
| 
 40MB  | 
 (2) 4M x 36  | 
 (2) 1M x 36  | 
| 
 48MB  | 
 (2) 4M x 36  | 
 (2) 2M x 36  | 
| 
 64MB  | 
 (2) 8M x 36  | 
 None  | 
| 
 64MB  | 
 (2) 4M x 36  | 
 (2) 4M x 36  | 
| 
 72MB  | 
 (2) 8M x 36  | 
 (2) 1M x 36  | 
| 
 80MB  | 
 (2) 8M x 36  | 
 (2) 2M x 36  | 
| 
 96MB  | 
 (2) 8M x 36  | 
 (2) 4M x 36  | 
| 
 SIMM CONFIGURATION (CON’T)  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 128MB  | 
 (2) 8M x 36  | 
 (2) 8M x 36  | 
| 
 128MB  | 
 (2) 16M x 36  | 
 None  | 
| 
 256MB  | 
 (2) 16M x 36  | 
 (2) 16M x 36  | 
| 
 512MB  | 
 (2) 32M x 36  | 
 (2) 32M x 36  | 
| 
 Note: Board accepts EDO memory.  | ||
| 
 CACHE CONFIGURATION  | 
| 
 Note: 256KB/512KB cache is located on the Pentium Pro CPU.  | 
| 
 CPU SPEED SELECTION  | |||||||
| 
 CPU speed  | 
 Clock speed  | 
 Multiplier  | 
 CLK1  | 
 CLK2  | 
 FREQ1  | 
 FREQ2  | 
 FREQ3  | 
| 
 150MHz  | 
 60MHz  | 
 2.5x  | 
 2 & 3  | 
 1 & 2  | 
 Open  | 
 Closed  | 
 Closed  | 
| 
 166MHz  | 
 66MHz  | 
 2.5x  | 
 1 & 2  | 
 2 & 3  | 
 Open  | 
 Closed  | 
 Closed  | 
| 
 180MHz  | 
 60MHz  | 
 3x  | 
 2 & 3  | 
 1 & 2  | 
 Closed  | 
 Open  | 
 Closed  | 
| 
 200MHz  | 
 66MHz  | 
 3x  | 
 1 & 2  | 
 2 & 3  | 
 Closed  | 
 Open  | 
 Closed  | 
| 
 Note: Pins designated should be in the closed position.  | |||||||