JC INFORMATION SYSTEMS CORPORATION
MODEL 2060
| 
 Processor  | 
 80386DX/80486SX/80487SX/80486DX/80486DX2  | 
| 
 Processor Speed  | 
 20/25/33/40(internal)/50/50(internal)/66(internal)  | 
| 
 Chip Set  | 
 OPTI  | 
| 
 Max. Onboard DRAM  | 
 64MB  | 
| 
 SRAM Cache  | 
 64/128/256KB  | 
| 
 BIOS  | 
 AMI  | 
| 
 Dimensions  | 
 330mm x 202mm  | 
| 
 I/O Options  | 
 16-bit riser card slot, bus mouse port, diagnostic port floppy drive interface, IDE interface, parallel port, PS/2 style keyboard serial ports (2), VGA feature connector, VGA port  | 
| 
 NPU Options  | 
 None  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 Diagnostic port  | 
 DIAG  | 
 IDE interface  | 
 J13  | 
| 
 VGA port  | 
 J1  | 
 Power LED & keylock  | 
 J15  | 
| 
 Parallel port  | 
 J2  | 
 Turbo LED  | 
 J16  | 
| 
 Serial port (COM2)  | 
 J3  | 
 Turbo switch  | 
 J17  | 
| 
 Serial port (COM1)  | 
 J4  | 
 Reset switch  | 
 J18  | 
| 
 Bus mouse port  | 
 J5  | 
 Speaker  | 
 J19  | 
| 
 PS/2 style keyboard connector  | 
 J6  | 
 External battery  | 
 P1  | 
| 
 VGA feature connector  | 
 J7  | 
 16-bit riser card  | 
 S1  | 
| 
 Floppy drive interface  | 
 J12  | ||
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Jumper  | 
 Position  | |
| » | 
 CMOS memory normal operation  | 
 JP18  | 
 pins 2 & 3 closed  | 
| 
 CMOS memory clear  | 
 JP18  | 
 pins 1 & 2 closed  | |
| » | 
 Monitor type select color  | 
 JP19  | 
 closed  | 
| 
 Monitor type select monochrome  | 
 JP19  | 
 open  | |
| » | 
 BIOS type select EPROM  | 
 JP20  | 
 pins 2 & 3 closed  | 
| 
 BIOS type select Flash ROM  | 
 JP20  | 
 pins 1 & 2 closed  | |
| » | 
 On-board VGA enabled  | 
 JP21  | 
 closed  | 
| 
 On-board VGA disabled  | 
 JP21  | 
 open  | |
| 
 VRAM CONFIGURATION  | |
| 
 Size  | 
 VRAM  | 
| 
 512KB  | 
 NONE  | 
| 
 1024KB  | 
 (4) 44256  | 
| 
 Note:The base 512KB is soldered on board.  | |
| 
 DRAM CONFIGURATION  | ||||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
 Bank 2  | 
 Bank 3  | 
| 
 1MB  | 
 (1) 256K x 36  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 2MB  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 NONE  | 
 NONE  | 
| 
 3MB  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 NONE  | 
| 
 4MB  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
| 
 4MB  | 
 (1) 1M x 36  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 5MB  | 
 (1) 256K x 36  | 
 (1) 1M x 36  | 
 NONE  | 
 NONE  | 
| 
 6MB  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 1M x 36  | 
 NONE  | 
| 
 7MB  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 1M x 36  | 
| 
 8MB  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
 NONE  | 
 NONE  | 
| 
 9MB  | 
 (1) 256K x 36  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
 NONE  | 
| 
 10MB  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
| 
 12MB  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
 NONE  | 
| 
 13MB  | 
 (1) 256K x 36  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
| 
 16MB  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
| 
 16MB  | 
 (1) 4M x 36  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 32MB  | 
 (1) 4M x 36  | 
 (1) 4M x 36  | 
 NONE  | 
 NONE  | 
| 
 48MB  | 
 (1) 4M x 36  | 
 (1) 4M x 36  | 
 (1) 4M x 36  | 
 NONE  | 
| 
 64MB  | 
 (1) 4M x 36  | 
 (1) 4M x 36  | 
 (1) 4M x 36  | 
 (1) 4M x 36  | 
| 
 CPU TYPE CONFIGURATION  | |||||
| 
 Type  | 
 JP1  | 
 JP2  | 
 JP3  | 
 JP11  | 
 JP13  | 
| 
 80486DX2  | 
 pins 1 & 2  | 
 closed  | 
 pins 1 & 2  | 
 closed  | 
 pins 2 & 3  | 
| 
 80486DX  | 
 pins 1 & 2  | 
 closed  | 
 pins 1 & 2  | 
 closed  | 
 pins 2 & 3  | 
| 
 80487SX  | 
 pins 1 & 2  | 
 closed  | 
 pins 2 & 3  | 
 closed  | 
 pins 2 & 3  | 
| 
 80486SX  | 
 pins 2 & 3  | 
 open  | 
 open  | 
 closed  | 
 pins 2 & 3  | 
| 
 80386DX  | 
 N/A  | 
 N/A  | 
 N/A  | 
 open  | 
 pins 1 & 2  | 
| 
 Note:Pins designated should be in the closed position.  | |||||
| 
 CPU SPEED CONFIGURATION  | |||||
| 
 Speed  | 
 OSCI  | 
 JP12  | 
 S0  | 
 S1  | 
 S2  | 
| 
 20MHz  | 
 40MHz  | 
 pins 2 & 3  | 
 closed  | 
 open  | 
 closed  | 
| 
 25MHz  | 
 50MHz  | 
 pins 2 & 3  | 
 open  | 
 open  | 
 closed  | 
| 
 33MHz  | 
 66MHz  | 
 pins 2 & 3  | 
 closed  | 
 closed  | 
 open  | 
| 
 40MHz  | 
 80MHz  | 
 pins 2 & 3  | 
 open  | 
 closed  | 
 open  | 
| 
 50(internal)MHz  | 
 50MHz  | 
 pins 2 & 3  | 
 open  | 
 open  | 
 closed  | 
| 
 50MHz  | 
 50MHz  | 
 pins 1 & 2  | 
 open  | 
 open  | 
 closed  | 
| 
 66(internal)MHz  | 
 66MHz  | 
 pins 2 & 3  | 
 closed  | 
 closed  | 
 open  | 
| 
 Note:Pins designated should be in the closed position.  | |||||
| 
 SRAM JUMPER CONFIGURATION  | ||||
| 
 Size  | 
 JP4  | 
 JP5  | 
 JP6  | 
 JP7  | 
| 
 64KB  | 
 open  | 
 open  | 
 open  | 
 open  | 
| 
 128KB  | 
 closed  | 
 open  | 
 open  | 
 closed  | 
| 
 256KB  | 
 closed  | 
 closed  | 
 closed  | 
 closed  | 
| 
 SRAM CONFIGURATION  | |||
| 
 Size  | 
 Cache SRAM  | 
 Location  | 
 TAG  | 
| 
 64KB  | 
 (8) 8K x 8  | 
 Banks 0 & 1  | 
 (1) 16K x 4  | 
| 
 128KB  | 
 (4) 32K x 8  | 
 Bank 0  | 
 (1) 16K x 4  | 
| 
 256KB  | 
 (8) 32K x 8  | 
 Banks 0 & 1  | 
 (1) 16K x 4  | 
| 
 PARALLEL & SERIAL PORT IRQ CONFIGURATION  | |||
| 
 Function/IRQ  | 
 Jumper  | 
 Position  | |
| » | 
 Parallel port interrupt select IRQ7  | 
 JP14/PP  | 
 pins 1 & 2 closed  | 
| 
 Parallel port interrupt select IRQ5  | 
 JP14/PP  | 
 pins 2 & 3 closed  | |
| » | 
 Serial port COM 1 interrupt select IRQ4  | 
 JP14/S1  | 
 pins 1 & 2 closed  | 
| 
 Serial port COM 1 interrupt select IRQ3  | 
 JP14/S1  | 
 pins 2 & 3 closed  | |
| » | 
 Serial port COM 2 interrupt select IRQ3  | 
 JP14/S2  | 
 pins 2 & 3 closed  | 
| 
 Serial port COM 2 interrupt select IRQ4  | 
 JP14/S2  | 
 pins 1 & 2 closed  | |