MONOLITHIC SYSTEMS, INC. (COLORADO MSI)
SBC486IE PISA SINGLE BOARD
| 
 Processor  | 
 80486SX/80486DX  | 
| 
 Processor Speed  | 
 20/25/33/50(internal)/66(internal)MHz  | 
| 
 Chip Set  | 
 C & T PEAK DM  | 
| 
 Max. Onboard DRAM  | 
 128MB  | 
| 
 Cache  | 
 128KB  | 
| 
 BIOS  | 
 AMI  | 
| 
 Dimensions  | 
 339mm x 127mm  | 
| 
 I/O Options  | 
 PS/2 mouse port, PS/2 keyboard connector  | 
| 
 NPU Options  | 
 4167  | 

| 
 CONNECTIONS  | 
|||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 External battery  | 
 J3  | 
 Power LED  | 
 J9  | 
| 
 Speaker  | 
 J5  | 
 Reset switch  | 
 J10  | 
| 
 Power LED & keylock  | 
 J6  | 
 PS/2 keyboard  | 
 J14  | 
| 
 Front panel switches & LEDs  | 
 J8  | 
 PS/2 mouse  | 
 J15  | 
| 
 USER CONFIGURABLE SETTINGS  | 
|||
| 
 Function  | 
 Jumper  | 
 Position  | 
|
| 
 »  | 
 Factory configured - do not alter  | 
 J1  | 
 pins 1 & 2 closed  | 
| 
 »  | 
 Factory configured - do not alter  | 
 J2  | 
 Closed  | 
| 
 »  | 
 Factory configured - do not alter  | 
 J7  | 
 pins 1 & 2 closed  | 
| 
 »  | 
 CMOS memory normal operation  | 
 J4  | 
 Open  | 
| 
 
  | 
 CMOS memory clear  | 
 J4  | 
 Closed  | 
| 
 »  | 
 Monitor type select color  | 
 J11  | 
 pins 2 & 3 closed  | 
| 
 
  | 
 Monitor type select monochrome  | 
 J11  | 
 pins 1 & 2 closed  | 
| 
 »  | 
 PS/2 mouse disabled (IRQ12 free)  | 
 J12  | 
 Open  | 
| 
 
  | 
 PS/2 mouse enabled at IRQ12  | 
 J12  | 
 Closed  | 
| 
 »  | 
 Watchdog timer disabled  | 
 J13  | 
 pins 2 & 3 closed  | 
| 
 
  | 
 Watchdog timer enabled  | 
 J13  | 
 pins 1 & 2 closed  | 
| 
 »  | 
 DMA signal select active high  | 
 J16  | 
 pins 1 & 2 closed  | 
| 
 
  | 
 DMA signal select active low  | 
 J16  | 
 pins 2 & 3 closed  | 
| 
 DRAM CONFIGURATION  | 
||||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
 Bank 2  | 
 Bank 3  | 
| 
 1MB  | 
 (1) 256K x 36  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 2MB  | 
 (1) 512K x 36  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 3MB  | 
 (1) 512K x 36  | 
 (1) 256K x 36  | 
 NONE  | 
 NONE  | 
| 
 4MB  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
 NONE  | 
 NONE  | 
| 
 4MB  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
| 
 5MB  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
 (1) 256K x 36  | 
 NONE  | 
| 
 6MB  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
 NONE  | 
| 
 7MB  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
 (1) 256K x 36  | 
| 
 8MB  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
 NONE  | 
 NONE  | 
| 
 8MB  | 
 (1) 2M x 36  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 9MB  | 
 (1) 2M x 36  | 
 (1) 256K x 36  | 
 NONE  | 
 NONE  | 
| 
 10MB  | 
 (1) 2M x 36  | 
 (1) 512K x 36  | 
 NONE  | 
 NONE  | 
| 
 12MB  | 
 (1) 2M x 36  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
 NONE  | 
| 
 13MB  | 
 (1) 2M x 36  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
 (1) 256K x 36  | 
| 
 16MB  | 
 (1) 2M x 36  | 
 (1) 2M x 36  | 
 NONE  | 
 NONE  | 
| 
 16MB  | 
 (1) 4M x 36  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 17MB  | 
 (1) 4M x 36  | 
 (1) 256K x 36  | 
 NONE  | 
 NONE  | 
| 
 18MB  | 
 (1) 2M x 36  | 
 (1) 2M x 36  | 
 (1) 512K x 36  | 
 NONE  | 
| 
 19MB  | 
 (1) 4M x 36  | 
 (1) 512K x 36  | 
 (1) 256K x 36  | 
 NONE  | 
| 
 20MB  | 
 (1) 2M x 36  | 
 (1) 2M x 36  | 
 (1) 1M x 36  | 
 NONE  | 
| 
 32MB  | 
 (1) 8M x 36  | 
 NONE  | 
 NONE  | 
 NONE  | 
| 
 40MB  | 
 (1) 8M x 36  | 
 (1) 2M x 36  | 
 NONE  | 
 NONE  | 
| 
 64MB  | 
 (1) 8M x 36  | 
 (1) 8M x 36  | 
 NONE  | 
 NONE  | 
| 
 96MB  | 
 (1) 8M x 36  | 
 (1) 8M x 36  | 
 (1) 4M x 36  | 
 (1) 4M x 36  | 
| 
 128MB  | 
 (1) 8M x 36  | 
 (1) 8M x 36  | 
 (1) 8M x 36  | 
 (1) 8M x 36  | 
| 
 Note: These are only some of the possible configurations. Memory must be installed in lower banks first, according to module capacity (highest to lowest).  | 
||||