NEC TECHNOLOGIES, INC.
POWERMATE 1 (APC-H200E, APC-H201E, APC-H202E, APC-H203E)
| 
 Processor  | 
 80286  | 
| 
 Processor Speed  | 
 10MHz  | 
| 
 Chip Set  | 
 Intel  | 
| 
 Max. Onboard DRAM  | 
 640MB  | 
| 
 SRAM Cache  | 
 None  | 
| 
 BIOS  | 
 Phoenix  | 
| 
 Dimensions  | 
 330mm x 218mm  | 
| 
 I/O Options  | 
 Floppy drive interface, parallel port, serial port  | 
| 
 NPU Options  | 
 80287  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 Serial port  | 
 C1  | 
 External battery  | 
 P3  | 
| 
 Parallel port  | 
 C2  | 
 Power LED & keylock  | 
 P7  | 
| 
 Speaker  | 
 P1  | 
 Floppy drive interface  | 
 P9  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Jumper/Switch  | 
 Position  | |
| » | 
 Factory configured - do not alter  | 
 5K1  | 
 pins 1 & 2 closed  | 
| » | 
 RAS/ALE output select normal  | 
 11M2  | 
 pins 2 & 3 closed  | 
| 
 RAS/ALE output select early  | 
 11M2  | 
 pins 1 & 2 closed  | |
| » | 
 Not used  | 
 16C1/1  | 
 Off  | 
| » | 
 Parallel port enabled  | 
 16C1/2  | 
 On  | 
| 
 Parallel port disabled  | 
 16C1/2  | 
 Off  | |
| » | 
 Not used  | 
 16C1/5  | 
 On  | 
| » | 
 Floppy interface (P9) enabled  | 
 16C1/6  | 
 On  | 
| 
 Floppy interface (P9) disabled  | 
 16C1/6  | 
 Off  | |
| » | 
 Floppy address select primary  | 
 16C1/7  | 
 Off  | 
| 
 Floppy address select secondary  | 
 16C1/7  | 
 On  | |
| » | 
 Monitor type select color  | 
 16C1/8  | 
 On  | 
| 
 Monitor type select monochrome  | 
 16C1/8  | 
 Off  | |
| » | 
 Factory configured - do not alter  | 
 16B2/1  | 
 On  | 
| » | 
 Factory configured - do not alter  | 
 16B2/2  | 
 Off  | 
| » | 
 Factory configured - do not alter  | 
 16B2/3  | 
 On  | 
| » | 
 Not used  | 
 16B2/4  | 
 On  | 
| » | 
 Factory configured - do not alter  | 
 16B2/6  | 
 On  | 
| » | 
 Floppy drive ROM select normal  | 
 20H2  | 
 pins 1 & 2 closed  | 
| 
 Floppy drive ROM select special  | 
 20H2  | 
 pins 2 & 3 closed  | |
| 
 Note:Jumper 5K1 is not present on later revisions of the board.  | |||
| 
 TEST MODE CONFIGURATION  | |||
| 
 Mode  | 
 16B2/5  | 
 15A1  | |
| » | 
 Normal operation  | 
 On  | 
 Out  | 
| 
 Test mode enabled  | 
 Off  | 
 In  | |
| 
 SERIAL PORT CONFIGURATION  | |||||
| 
 Port Assignment  | 
 Address  | 
 Interrupt  | 
 16C1/3  | 
 16C1/4  | |
| » | 
 COM1  | 
 3F8-3FFh  | 
 IRQ4  | 
 On  | 
 Off  | 
| 
 COM2  | 
 2F8-2FFh  | 
 IRQ3  | 
 Off  | 
 On  | |
| 
 Disabled  | 
 N/A  | 
 N/A  | 
 Off  | 
 Off  | |
| 
 DRAM CONFIGURATION  | ||||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
 6K1/pins 1 & 4  | 
 6K1/pins 2 & 3  | 
| 
 512KB  | 
 512K  | 
 0K  | 
 Open  | 
 Closed  | 
| 
 640KB  | 
 512K  | 
 128K  | 
 Closed  | 
 Open  | 
| 
 MEMORY WAIT STATE CONFIGURATION  | ||
| 
 Wait state  | 
 5K3/pins 1 & 2  | 
 5K3/pins 3 & 4  | 
| 
 2 wait states  | 
 Closed  | 
 Open  | 
| 
 1 wait state  | 
 Open  | 
 Closed  | 
| 
 Note:Memory wait states are only applied to external memory card(s). When not in turbo mode the memory wait state is always 1 wait state.  | ||
| 
 BIOS CONFIGURATION  | |||
| 
 Type  | 
 Size  | 
 12J1  | 
 12J2  | 
| 
 EPROM  | 
 27256  | 
 pins 2 & 3 closed  | 
 pins 2 & 3 closed  | 
| 
 EPROM  | 
 27128  | 
 pins 1 & 2 closed  | 
 pins 2 & 3 closed  | 
| 
 ROM  | 
 27256  | 
 pins 1 & 2 closed  | 
 pins 1 & 2 closed  | 
| 
 ROM  | 
 27128  | 
 pins 1 & 2 closed  | 
 pins 1 & 2 closed  |