OLIVETTI
M6-520/540/560 (BA2015, 202X, 209X)
| 
 Processor  | 
 80486SX/80487SX/80486DX/80486DX2  | 
| 
 Processor Speed  | 
 25/33/50(internal)/66(internal)MHz  | 
| 
 Chip Set  | 
 Unidentified  | 
| 
 Maximum Onboard Memory  | 
 64MB  | 
| 
 Cache  | 
 256KB  | 
| 
 BIOS  | 
 Unidentified  | 
| 
 Dimensions  | 
 254mm x 218mm  | 
| 
 I/O Options  | 
 Floppy drive interface, IDE interface, SCSI connector, parallel port, PS/2 mouse port, serial ports (2), VGA port, cache slot, riser slot  | 
| 
 NPU Options  | 
 None  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 Serial port 1  | 
 CN1  | 
 Floppy drive interface  | 
 CN8  | 
| 
 Serial port 2  | 
 CN2  | 
 SCSI terminator  | 
 J1  | 
| 
 VGA port  | 
 CN3  | 
 SCSI terminator  | 
 J2  | 
| 
 Parallel port  | 
 CN4  | 
 Chassis fan power  | 
 J3  | 
| 
 PS/2 mouse port  | 
 CN5  | 
 Speaker  | 
 J4  | 
| 
 SCSI connector  | 
 CN6  | 
 Cache slot  | 
 SL1  | 
| 
 IDE interface  | 
 CN7  | 
 Riser slot  | 
 SL2  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Setting  | 
 Label  | 
 Position  | |
| 
 »  | 
 SCSI terminators enabled  | 
 P5  | 
 Pins 1 & 2 closed  | 
| 
 SCSI terminators disabled  | 
 P5  | 
 Pins 2 & 3 closed  | |
| 
 »  | 
 Password disabled  | 
 P7  | 
 Pins 1 & 2 closed  | 
| 
 Password enabled  | 
 P7  | 
 Pins 2 & 3 closed  | |
| 
 »  | 
 Floppy drives not write protected  | 
 P8  | 
 Open  | 
| 
 Floppy drives write protected  | 
 P8  | 
 Closed  | |
| 
 »  | 
 Serial ports and parallel port enabled  | 
 P9  | 
 Open  | 
| 
 Serial ports and parallel port disabled  | 
 P9  | 
 Closed  | |
| 
 »  | 
 Serial port bootstrap enabled  | 
 P11  | 
 Open  | 
| 
 Serial port bootstrap disabled  | 
 P11  | 
 Closed  | |
| 
 »  | 
 Floppy drive bootstrap enabled  | 
 P12  | 
 Closed  | 
| 
 Floppy drive bootstrap disabled  | 
 P12  | 
 Open  | |
| 
 »  | 
 Factory configured - do not alter  | 
 SW1/5  | 
 Off  | 
| 
 »  | 
 Factory configured - do not alter  | 
 SW1/6  | 
 Off  | 
| 
 BIOS update through utility  | 
 SW1/8  | 
 On  | |
| 
 BIOS write enabled  | 
 SW1/8  | 
 Off  | |
| 
 Note: On jumper P7, if jumper is set on 1 & 2, move to 2 & 3. The jumper doesn’t have to be moved back to 1 & 2. The reverse is true if 2 & 3 are closed. Move to 1 & 2.  | |||
| 
 DRAM  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 8MB  | 
 (2) 1M x 36  | 
 None  | 
| 
 16MB  | 
 (2) 1M x 36  | 
 (2) 1M x 36  | 
| 
 24MB  | 
 (2) 1M x 36  | 
 (2) 2M x 36  | 
| 
 64MB  | 
 (2) 4M x 36  | 
 (2) 4M x 36  | 
| 
 CACHE SIZE  | |
| 
 Size  | 
 SL1  | 
| 
 256KB  | 
 Installed  | 
| 
 CPU SPEED  | |
| 
 Setting  | 
 SW1/7  | 
| 
 25MHz  | 
 On  | 
| 
 33MHz  | 
 Off  | 
| 
 50iMHz  | 
 On  | 
| 
 66iMHz  | 
 Off  | 
| 
 FLOPPY DRIVE A  | ||
| 
 Setting  | 
 SW1/1  | 
 SW1/2  | 
| 
 1.44MB  | 
 On  | 
 On  | 
| 
 2.88MB  | 
 Off  | 
 On  | 
| 
 1.2MB/none installed  | 
 On  | 
 Off  | 
| 
 80/120MB streaming tape  | 
 Off  | 
 Off  | 
| 
 FLOPPY DRIVE B  | ||
| 
 Setting  | 
 SW1/3  | 
 SW1/4  | 
| 
 1.44MB  | 
 On  | 
 On  | 
| 
 2.88MB  | 
 Off  | 
 On  | 
| 
 1.2MB/none installed  | 
 On  | 
 Off  | 
| 
 80/120MB streaming tape  | 
 Off  | 
 Off  | 
| 
 VIDEO MEMORY  | |
| 
 Size  | 
 Bank 0  | 
| 
 1MB  | 
 (4) 256K x 8  |