PACKARD BELL
PENTIUM 90MHZ
| 
 Processor  | 
 Pentium  | 
| 
 Processor Speed  | 
 90MHz  | 
| 
 Chip Set  | 
 Unidentified  | 
| 
 Max. Onboard DRAM  | 
 72MB  | 
| 
 Cache  | 
 256KB  | 
| 
 BIOS  | 
 Unidentified  | 
| 
 Dimensions  | 
 330mm x 218mm  | 
| 
 I/O Options  | 
 Floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VGA feature connector, VGA port  | 
| 
 NPU Options  | 
 None  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 VESA feature connector  | 
 J1L1  | 
 Reset switch  | 
 J6A2  | 
| 
 VGA port  | 
 J1N1  | 
 IDE interface LED  | 
 J7A1  | 
| 
 Parallel port  | 
 J3N1  | 
 PS/2 mouse port  | 
 J7N1  | 
| 
 Chassis fan power  | 
 J4A1  | 
 Serial port 1  | 
 J8J1  | 
| 
 Chassis fan power  | 
 J4A2  | 
 Floppy drive interface  | 
 J9H1  | 
| 
 3v power connector  | 
 J5L1  | 
 ISA IDE interface  | 
 J9H2  | 
| 
 Serial port 2  | 
 J5N1  | 
 PCI IDE interface  | 
 J9G1  | 
| 
 Speaker  | 
 J6A1  | 
 Riser Card  | 
 SL1  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Jumper  | 
 Position  | |
| 
 »  | 
 Recovery mode disabled  | 
 J1H1  | 
 pins 2 & 3 closed  | 
| 
 Recovery mode enabled  | 
 J1H1  | 
 pins 1 & 2 closed  | |
| 
 »  | 
 BIOS setup entry enabled  | 
 J1H2  | 
 pins 1 & 2 closed  | 
| 
 BIOS setup entry disabled  | 
 J1H2  | 
 pins 2 & 3 closed  | |
| 
 »  | 
 Setup entry enabled  | 
 J1H3  | 
 pins 1 & 2 closed  | 
| 
 Setup entry disabled  | 
 J1H3  | 
 pins 2 & 3 closed  | |
| 
 »  | 
 Password disabled  | 
 J1H4  | 
 pins 2 & 3 closed  | 
| 
 Password enabled  | 
 J1H4  | 
 pins 1 & 2 closed  | |
| 
 »  | 
 Monitor type select color  | 
 J1H5  | 
 pins 2 & 3 closed  | 
| 
 Monitor type select monochrome  | 
 J1H5  | 
 pins 1 & 2 closed  | |
| 
 »  | 
 CMOS memory normal operation  | 
 J1H6  | 
 pins 1 & 2 closed  | 
| 
 CMOS memory clear  | 
 J1H6  | 
 pins 2 & 3 closed  | |
| 
 »  | 
 Factory configured - do not alter  | 
 J5A2  | 
 N/A  | 
| 
 »  | 
 Factory configured - do not alter  | 
 J6A3  | 
 N/A  | 
| 
 »  | 
 CPU voltage select 3.3v  | 
 J9N1  | 
 pins 1 & 2 closed  | 
| 
 CPU voltage select 5.0v  | 
 J9N1  | 
 pins 2 & 3 closed  | |
| 
 Note: The location of jumpers J5A2 & J6A3 are unidentified.  | |||
| 
 DRAM CONFIGURATION  | |||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
 Bank 2  | 
| 
 8MB  | 
 8MB  | 
 NONE  | 
 NONE  | 
| 
 10MB  | 
 8MB  | 
 (1) 256K x 36  | 
 (1) 256K x 36  | 
| 
 12MB  | 
 8MB  | 
 (1) 512K x 36  | 
 (1) 512K x 36  | 
| 
 16MB  | 
 8MB  | 
 (1) 1M x 36  | 
 (1) 1M x 36  | 
| 
 24MB  | 
 8MB  | 
 (1) 2M x 36  | 
 (1) 2M x 36  | 
| 
 40MB  | 
 8MB  | 
 (1) 4M x 36  | 
 (1) 4M x 36  | 
| 
 72MB  | 
 8MB  | 
 (1) 8M x 36  | 
 (1) 8M x 36  | 
| 
 Note: Bank 0 is factory installed and is not configurable.  | |||
| 
 CACHE CONFIGURATION  | 
| 
 Note: This board has 256KB of cache factory installed. The location is unidentified.  | 
| 
 CPU SPEED CONFIGURATION  | ||
| 
 Speed  | 
 J1J1  | 
 J1J2  | 
| 
 90MHz  | 
 pins 2 & 3 closed  | 
 pins 2 & 3 closed  | 
| 
 VIDEO MEMORY CONFIGURATION  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 1MB  | 
 NONE  | 
 NONE  | 
| 
 2MB  | 
 (1) 256K x 16  | 
 (1) 256K x 16  | 
| 
 Note: This board has 1MB of VRAM factory installed. The location is unidentified.  | ||