TEKNOR INDUSTRIAL COMPUTERS, INC.
TEK 932
| 
 Processor  | 
 Pentium  | 
| 
 Processor Speed  | 
 75/100MHz  | 
| 
 Chip Set  | 
 Intel  | 
| 
 Video Chip Set  | 
 Unidentified  | 
| 
 Maximum Onboard Memory  | 
 128MB  | 
| 
 Maximum Video Memory  | 
 Unidentified  | 
| 
 Cache  | 
 256/512KB  | 
| 
 BIOS  | 
 AMI  | 
| 
 Dimensions  | 
 Unidentified  | 
| 
 I/O Options  | 
 Floppy drive interface, IDE interface, PS/2 mouse interface, parallel port, serial ports (2), VGA port, cache slot, flat panel connector  | 
| 
 NPU Options  | 
 None  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 External battery  | 
 B1  | 
 Flat panel connector  | 
 J6  | 
| 
 IDE interface  | 
 J1  | 
 PS/2 mouse interface  | 
 J7  | 
| 
 Floppy drive interface  | 
 J2  | 
 VGA port  | 
 J9  | 
| 
 Keyboard, speaker, reset, LED  | 
 J3  | 
 Chassis fan power  | 
 J10  | 
| 
 Serial port 1  | 
 J4  | 
 Parallel port  | 
 J11  | 
| 
 Serial port 2  | 
 J5  | 
 Cache slot  | 
 SL1  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Label  | 
 Position  | |
| 
 »  | 
 BIOS boot select normal boot  | 
 J8  | 
 Open  | 
| 
 BIOS boot select emergency boot  | 
 J8  | 
 Closed  | |
| 
 »  | 
 Internal battery disabled  | 
 W9  | 
 Open  | 
| 
 Internal battery enabled  | 
 W9  | 
 Closed  | |
| 
 »  | 
 Pixel clock polarity positive  | 
 W10  | 
 Pins 1 & 2 closed  | 
| 
 Pixel clock polarity negative  | 
 W10  | 
 Pins 2 & 3 closed  | |
| 
 »  | 
 PS/2 mouse IRQ12 disabled  | 
 W11  | 
 Open  | 
| 
 PS/2 mouse IRQ12 enabled  | 
 W11  | 
 Closed  | |
| 
 »  | 
 Power fail monitoring disabled  | 
 W13  | 
 Open  | 
| 
 Power fail monitoring enabled  | 
 W13  | 
 Closed  | |
| 
 »  | 
 IOCHRDY signal to IDE interface disabled  | 
 W18  | 
 Open  | 
| 
 IOCHRDY signal to IDE interface enabled  | 
 W18  | 
 Closed  | |
| 
 SIMM CONFIGURATION  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 2MB  | 
 (2) 256K x 36  | 
 None  | 
| 
 4MB  | 
 (2) 512K x 36  | 
 None  | 
| 
 4MB  | 
 (2) 256K x 36  | 
 (2) 256K x 36  | 
| 
 6MB  | 
 (2) 512K x 36  | 
 (2) 256K x 36  | 
| 
 8MB  | 
 (2) 1M x 36  | 
 None  | 
| 
 8MB  | 
 (2) 512K x 36  | 
 (2) 512K x 36  | 
| 
 10MB  | 
 (2) 1M x 36  | 
 (2) 256K x 36  | 
| 
 12MB  | 
 (2) 512K x 36  | 
 (2) 1M x 36  | 
| 
 16MB  | 
 (2) 2M x 36  | 
 None  | 
| 
 16MB  | 
 (2) 1M x 36  | 
 (2) 1M x 36  | 
| 
 18MB  | 
 (2) 2M x 36  | 
 (2) 256K x 36  | 
| 
 20MB  | 
 (2) 512K x 36  | 
 (2) 2M x 36  | 
| 
 24MB  | 
 (2) 2M x 36  | 
 (2) 1M x 36  | 
| 
 32MB  | 
 (2) 4M x 36  | 
 None  | 
| 
 32MB  | 
 (2) 2M x 36  | 
 (2) 2M x 36  | 
| 
 34MB  | 
 (2) 4M x 36  | 
 (2) 256K x 36  | 
| 
 36MB  | 
 (2) 512K x 36  | 
 (2) 4M x 36  | 
| 
 40MB  | 
 (2) 4M x 36  | 
 (2) 1M x 36  | 
| 
 48MB  | 
 (2) 2M x 36  | 
 (2) 4M x 36  | 
| 
 64MB  | 
 (2) 8M x 36  | 
 None  | 
| 
 66MB  | 
 (2) 256K x 36  | 
 (2) 8M x 36  | 
| 
 68MB  | 
 (2) 8M x 36  | 
 (2) 512K x 36  | 
| 
 72MB  | 
 (2) 1M x 36  | 
 (2) 8M x 36  | 
| 
 80MB  | 
 (2) 8M x 36  | 
 (2) 2M x 36  | 
| 
 96MB  | 
 (2) 4M x 36  | 
 (2) 8M x 36  | 
| 
 128MB  | 
 (2) 8M x 36  | 
 (2) 8M x 36  | 
| 
 CACHE CONFIGURATION  | |
| 
 Size  | 
 SL1  | 
| 
 256KB  | 
 256KB module installed  | 
| 
 512KB  | 
 512KB module installed  | 
| 
 VIDEO MEMORY CONFIGURATION  | 
| 
 Note: The size of the video memory is unidentified.  | 
| 
 DMA CHANNEL SELECTION  | |||
| 
 Channel  | 
 W16  | 
 W17  | |
| 
 1  | 
 Pins 1 & 2 closed  | 
 Pins 1 & 2 closed  | |
| 
 3  | 
 Pins 2 & 3 closed  | 
 Pins 2 & 3 closed  | |
| » | 
 None  | 
 Open  | 
 Open  | 
| 
 PARALLEL PORT INTERRUPT SELECTION  | ||
| 
 IRQ  | 
 W15  | |
| 
 IRQ5  | 
 Pins 1 & 2 closed  | |
| » | 
 IRQ7  | 
 Pins 2 & 3 closed  | 
| 
 None  | 
 Open  | |
| 
 SERIAL PORT 2 LOOPBACK SELECTION  | |||
| 
 Setting  | 
 W5  | 
 W6  | |
| » | 
 Normal  | 
 Open  | 
 Open  | 
| 
 Loopback  | 
 Closed  | 
 Closed  | |
| 
 SERIAL PORT 2 SELECTION  | |||||
| 
 Setting  | 
 W3  | 
 W4  | 
 W7  | 
 W8  | |
| » | 
 RS-232  | 
 Pins 1 & 2 closed  | 
 Pins 1 & 2 closed  | 
 Pins 1 & 2 closed  | 
 Pins 1 & 2 closed  | 
| 
 RS-485  | 
 Pins 2 & 3 closed  | 
 Pins 2 & 3 closed  | 
 Pins 2 & 3 closed  | 
 Pins 2 & 3 closed  | |
| 
 FLOPPY DRIVE EDOUT SELECTION  | ||
| 
 Setting  | 
 W1  | |
| » | 
 Left to software  | 
 Open  | 
| 
 Ground to pin 17 on J2  | 
 Pins 2 & 4 closed  | |
| 
 Ground to pin 29 on J2  | 
 Pins 3 & 4 closed  | |
| 
 EDOUT to pin 29 on J2  | 
 Pins 1 & 3 closed  | |
| 
 EDOUT to pin 17 on J2  | 
 Pins 1 & 2 closed  | |
| 
 FLOPPY DRIVE HDOUT SELECTION  | ||
| 
 Setting  | 
 W2  | |
| » | 
 Left to software  | 
 Open  | 
| 
 Ground to pin 27 on J2  | 
 Pins 2 & 4 closed  | |
| 
 Ground to pin 33 on J2  | 
 Pins 3 & 4 closed  | |
| 
 HDOUT to pin 33 on J2  | 
 Pins 1 & 3 closed  | |
| 
 HDOUT to pin 27 on J2  | 
 Pins 1 & 2 closed  | |
| 
 BASE I/O SELECTION  | ||
| 
 Address  | 
 W14  | |
| » | 
 190H  | 
 Pins 1 & 2, 3 & 4 closed  | 
| 
 290H  | 
 Pins 1 & 2 closed  | |
| 
 390H  | 
 Pins 3 & 4 closed  | |
| 
 390H  | 
 Open  | |
| 
 EXTENDED BIOS MODE SELECTION  | ||
| 
 Setting  | 
 W12  | |
| 
 VT100  | 
 Pins 3 & 4 closed  | |
| 
 Serial download  | 
 Pins 1 & 2 closed  | |
| » | 
 Standard mode  | 
 Pins 3 & 4 closed  | 
| » | 
 Normal mode  | 
 Pins 1 & 2 closed  |