SIEMENS-NIXDORF INFORMATIONSSYSTEME AG
SYSTEM BOARD D1005
| 
 Device Type  | 
 Mainboard  | 
| 
 Processor  | 
 Pentium II  | 
| 
 Processor Speed  | 
 233/266/300MHz  | 
| 
 Chip Set  | 
 Unidentified  | 
| 
 Video Chip Set  | 
 None  | 
| 
 Maximum Onboard Memory  | 
 256MB (EDO supported)  | 
| 
 Maximum Video Memory  | 
 None  | 
| 
 Cache  | 
 256/512KB (located on Pentium II CPU)  | 
| 
 BIOS  | 
 Unidentified  | 
| 
 Dimensions  | 
 305mm x 244mm  | 
| 
 I/O Options  | 
 32-bit PCI slots (4), floppy drive interface, game/MIDI port, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB connectors (2), line in, line out, microphone in, wavetable connector, audio in – CD-ROM, telephony connectors (2)  | 
| 
 NPU Options  | 
 None  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Purpose  | 
 Location  | 
| 
 Game/MIDI port  | 
 CN1  | 
 Telephony connector  | 
 J2F3  | 
| 
 Microphone in  | 
 CN2  | 
 Audio in – CD-ROM  | 
 J2F6  | 
| 
 Line in  | 
 CN3  | 
 Line in (auxiliary)  | 
 J3F1  | 
| 
 Line out  | 
 CN4  | 
 Chassis fan power  | 
 J4F1  | 
| 
 Serial port 2  | 
 CN5  | 
 Security connector  | 
 J6C1  | 
| 
 Serial port 1  | 
 CN6  | 
 Chassis fan power  | 
 J9A1  | 
| 
 Parallel port  | 
 CN7  | 
 Soft off power supply  | 
 J9D1/pins 1 & 2  | 
| 
 USB connector 1  | 
 CN8  | 
 Green PC connector  | 
 J9D1/pins 3 & 4  | 
| 
 USB connector 2  | 
 CN9  | 
 IR connector  | 
 J9D1/pins 6 - 11  | 
| 
 PS/2 mouse port  | 
 CN10  | 
 IDE interface LED  | 
 J9D1/pins 13 - 16  | 
| 
 IDE interface 2  | 
 CN11  | 
 Power LED  | 
 J9D1/pins 18 - 20  | 
| 
 IDE interface 1  | 
 CN12  | 
 Reset switch  | 
 J9D1/pins 22 & 23  | 
| 
 Floppy drive interface  | 
 CN13  | 
 Speaker  | 
 J9D1/pins 24 - 27  | 
| 
 Telephony connector  | 
 J2F1  | 
 32-bit PCI slots  | 
 PC1 – PC4  | 
| 
 Wavetable connector  | 
 J2F2  | ||
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Label  | 
 Position  | |
| 
 »  | 
 Flash BIOS normal operation  | 
 J9C1A  | 
 Pins 5 & 6 closed  | 
| 
 Flash BIOS recovery mode  | 
 J9C1A  | 
 Pins 4 & 5 closed  | |
| 
 »  | 
 CMOS memory normal operation  | 
 J9C1C  | 
 Pins 5 & 6 closed  | 
| 
 CMOS memory clear  | 
 J9C1C  | 
 Pins 4 & 5 closed  | |
| 
 »  | 
 Setup access enabled  | 
 J9C1D  | 
 Pins 5 & 6 closed  | 
| 
 Setup access disabled  | 
 J9C1D  | 
 Pins 4 & 5 closed  | |
| 
 SIMM CONFIGURATION  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 8MB  | 
 (2) 1M x 36  | 
 None  | 
| 
 16MB  | 
 (2) 2M x 36  | 
 None  | 
| 
 16MB  | 
 (2) 1M x 36  | 
 (2) 1M x 36  | 
| 
 24MB  | 
 (2) 2M x 36  | 
 (2) 1M x 36  | 
| 
 32MB  | 
 (2) 4M x 36  | 
 None  | 
| 
 32MB  | 
 (2) 2M x 36  | 
 (2) 2M x 36  | 
| 
 40MB  | 
 (2) 4M x 36  | 
 (2) 1M x 36  | 
| 
 48MB  | 
 (2) 4M x 36  | 
 (2) 2M x 36  | 
| 
 64MB  | 
 (2) 8M x 36  | 
 None  | 
| 
 64MB  | 
 (2) 4M x 36  | 
 (2) 4M x 36  | 
| 
 SIMM CONFIGURATION (CON’T)  | ||
| 
 Size  | 
 Bank 0  | 
 Bank 1  | 
| 
 72MB  | 
 (2) 8M x 36  | 
 (2) 1M x 36  | 
| 
 80MB  | 
 (2) 8M x 36  | 
 (2) 2M x 36  | 
| 
 96MB  | 
 (2) 8M x 36  | 
 (2) 4M x 36  | 
| 
 128MB  | 
 (2) 8M x 36  | 
 (2) 8M x 36  | 
| 
 128MB  | 
 (2) 16M x 36  | 
 None  | 
| 
 136MB  | 
 (2) 16M x 36  | 
 (2) 1M x 36  | 
| 
 144MB  | 
 (2) 16M x 36  | 
 (2) 2M x 36  | 
| 
 160MB  | 
 (2) 16M x 36  | 
 (2) 4M x 36  | 
| 
 192MB  | 
 (2) 16M x 36  | 
 (2) 8M x 36  | 
| 
 256MB  | 
 (2) 16M x 36  | 
 (2) 16M x 36  | 
| 
 Note: Board accepts EDO memory.  | ||
| 
 CACHE CONFIGURATION  | 
| 
 Note: 256KB/512KB cache is located on the Pentium II CPU.  | 
| 
 CPU SPEED SELECTION  | |||||
| 
 CPU speed  | 
 Clock speed  | 
 Multiplier  | 
 J9C1A  | 
 J9C1B  | 
 J9C1C  | 
| 
 233MHz  | 
 66MHz  | 
 3.5x  | 
 2 & 3  | 
 2 & 3, 5 & 6  | 
 2 & 3  | 
| 
 266MHz  | 
 66MHz  | 
 4x  | 
 1 & 2  | 
 1 & 2, 4 & 5  | 
 2 & 3  | 
| 
 300MHz  | 
 66MHz  | 
 4.5x  | 
 1 & 2  | 
 2 & 3, 4 & 5  | 
 2 & 3  | 
| 
 Note: Pins designated should be in the closed position.  | |||||