DANPEX CORPORATION
ET-509
| 
 Card Type  | 
 Translator  | 
| 
 NIC Type  | 
 Ethernet  | 
| 
 Network Transfer Rate  | 
 10Mbps  | 
| 
 Topology  | 
 Linear Bus/Star  | 
| 
 Wiring Type  | 
 Unshielded twisted pair RG-58A/U 50ohm coaxial  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 RG-58A/U 50ohm coaxial connector  | 
 CN1  | 
 DC power in  | 
 CN3  | 
| 
 Unshielded twisted pair connector  | 
 CN2  | ||
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Setting  | 
 Label  | 
 Position  | |
| » | 
 SQE test disabled  | 
 JP1  | 
 Pins 2 & 3 closed  | 
| 
 SQE test enabled  | 
 JP1  | 
 Pins 1 & 2 closed  | |
| 
 DIAGNOSTIC LED(S)  | |||
| 
 LED  | 
 Color  | 
 Status  | 
 Condition  | 
| 
 P/U  | 
 Unidentified  | 
 Blinking  | 
 Power is on and transceiver is transmitting to or receiving from the unshielded twisted pair connector  | 
| 
 P/U  | 
 Unidentified  | 
 Off  | 
 Power is off or transceiver is not transmitting to or receiving from the unshielded twisted pair connector  | 
| 
 LNK  | 
 Unidentified  | 
 On  | 
 Network connection is good  | 
| 
 LNK  | 
 Unidentified  | 
 Off  | 
 Network connection is broken  | 
| 
 COL  | 
 Unidentified  | 
 On  | 
 Coaxial connector improperly terminated  | 
| 
 COL  | 
 Unidentified  | 
 Off  | 
 Collision has not been detected  | 
| 
 COL  | 
 Unidentified  | 
 Blinking  | 
 Collision has been detected  | 
| 
 BNC  | 
 Unidentified  | 
 Blinking  | 
 Transceiver is transmitting to or receiving from the coaxial connector  | 
| 
 BNC  | 
 Unidentified  | 
 Off  | 
 Transceiver is not transmitting to or receiving from the coaxial connector  | 
| 
 Note:The exact locations of each LED are unidentified.  | |||