COMPU-SHACK PRODUCTION, GMBH
CS-BASELINE-PCI UTP/FO, CS-MORITZ-PCI UTP/FO
| 
 Card Type  | 
 Network Interface Card  | 
| 
 NIC Type  | 
 Ethernet  | 
| 
 Maximum Onboard Memory  | 
 Unidentified  | 
| 
 Boot ROM  | 
 Available  | 
| 
 Network Transfer Rate  | 
 10Mbps  | 
| 
 Topology  | 
 Star  | 
| 
 Wiring Type  | 
 Unshielded twisted pair Fiber optic cable  | 
| 
 Data Bus  | 
 32-bit PCI  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 Fiber-optic connector  | 
 CN1  | 
 UTP connector  | 
 CN3  | 
| 
 Fiber-optic connector  | 
 CN2  | ||
| 
 USER CONFIGURABLE SETTINGS  | ||
| 
 Function  | 
 Label  | 
 Position  | 
| 
 50 Ohm termination activated  | 
 J4  | 
 Closed  | 
| 
 50 Ohm termination not activated  | 
 J4  | 
 Open  | 
| 
 DIAGNOSTIC LED(S)  | |||
| 
 LED  | 
 Color  | 
 Status  | 
 Condition  | 
| 
 LED1  | 
 Green  | 
 On  | 
 UTP link is good  | 
| 
 LED1  | 
 Green  | 
 Off  | 
 UTP link is broken  | 
| 
 LED2  | 
 Yellow  | 
 On  | 
 Data is being transmitted/received  | 
| 
 LED2  | 
 Yellow  | 
 Off  | 
 Data is not being transmitted/received  | 
| 
 LED3  | 
 Red  | 
 On  | 
 Jabber signal detected  | 
| 
 LED3  | 
 Red  | 
 Off  | 
 No jabber signal detected  | 
| 
 LED4  | 
 Yellow  | 
 Blinking  | 
 Collision detected on network  | 
| 
 LED4  | 
 Yellow  | 
 Off  | 
 No collision detected on network  | 
| 
 LED5  | 
 Green  | 
 On  | 
 Fiber-optic link is good  | 
| 
 LED5  | 
 Green  | 
 Off  | 
 Fiber-optic link is broken  |