CABLETRON SYSTEMS, INC.
CTP100-T
| 
 Device Type  | 
 Media Adapter  | 
| 
 NIC Type  | 
 Ethernet  | 
| 
 Maximum Onboard Memory  | 
 Unidentified  | 
| 
 Boot ROM  | 
 Not available  | 
| 
 Network Transfer Rate  | 
 10Mbps  | 
| 
 Topology  | 
 Star  | 
| 
 Wiring Type  | 
 Unshielded twisted pair, RG-58A/U 50ohm coaxial cable  | 
| 
 Data Bus  | 
 External  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 RJ-45 UTP connector  | 
 CN1  | 
 RG-58A/U connector  | 
 CN3  | 
| 
 Power Jack  | 
 CN2  | ||
| 
 USER CONFIGURABLE SETTINGS  | ||
| 
 Function  | 
 Label  | 
 Position  | 
| 
 RG-58A/U port terminated internally  | 
 SW1  | 
 Off  | 
| 
 RG-58A/U port terminated externally  | 
 SW1  | 
 On  | 
| 
 DIAGNOSTIC LED(S)  | |||
| 
 LED  | 
 Color  | 
 Status  | 
 Condition  | 
| 
 PWR  | 
 Green  | 
 On  | 
 Power is on  | 
| 
 PWR  | 
 Green  | 
 Off  | 
 Power is off  | 
| 
 XMT  | 
 Green  | 
 Blinking  | 
 Data is being transmitted  | 
| 
 XMT  | 
 Green  | 
 Off  | 
 Data is not being transmitted  | 
| 
 RCV  | 
 Yellow  | 
 Blinking  | 
 Data is being received  | 
| 
 RCV  | 
 Yellow  | 
 Off  | 
 Data is not being received  | 
| 
 CLN  | 
 Red  | 
 Blinking  | 
 Collision detected on network  | 
| 
 CLN  | 
 Red  | 
 Off  | 
 No collision detected on network  | 
| 
 LNK  | 
 Green  | 
 On  | 
 UTP link is good  | 
| 
 LNK  | 
 Green  | 
 Off  | 
 UTP link is broken  | 
| 
 LNK  | 
 Green  | 
 Blinking  | 
 Reversed polarity signal is being received on UTP link  |