LANCAST
4320-11
| 
 Card Type  | 
 Transceiver  | 
| 
 NIC Type  | 
 Ethernet  | 
| 
 Network Transfer Rate  | 
 10Mbps  | 
| 
 Topology  | 
 Star  | 
| 
 Wiring Type  | 
 Unshielded twisted pair, AUI transceiver via DB-15 port  | 
| 
 Data Bus  | 
 External  | 

| 
 CONNECTIONS  | 
|||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 RJ-45 UTP connector  | 
 CN1  | 
 AUI transceiver via DB-15  | 
 CN2  | 
| 
 USER CONFIGURABLE SETTINGS  | 
||
| 
 Function  | 
 Label  | 
 Position  | 
| 
 í Device operates on 10Base-T compatible hubs  | 
 LINK  | 
 On  | 
| 
 Device does not operate on 10Base-T compatible hubs  | 
 LINK  | 
 Off  | 
| 
 í Low Receipt Threshold set high  | 
 LRT  | 
 Off  | 
| 
 Low Receipt Threshold set low  | 
 LRT  | 
 On  | 
| 
 í Signal Quality Error signal disabled  | 
 SQE  | 
 Off  | 
| 
 Signal Quality Error signal enabled  | 
 SQE  | 
 On  | 
| 
 DIAGNOSTIC LED(S)  | 
|||
| 
 LED  | 
 Color  | 
 Status  | 
 Condition  | 
| 
 PWR  | 
 Unidentified  | 
 On  | 
 Power is being received from the DTE device  | 
| 
 PWR  | 
 Unidentified  | 
 Off  | 
 Power is not being received from the DTE device  | 
| 
 TX  | 
 Unidentified  | 
 Blinking  | 
 Data is being transmitted  | 
| 
 TX  | 
 Unidentified  | 
 Off  | 
 Data is not being transmitted  | 
| 
 RX  | 
 Unidentified  | 
 Blinking  | 
 Data is being received  | 
| 
 RX  | 
 Unidentified  | 
 Off  | 
 Data is not being received  | 
| 
 COL  | 
 Unidentified  | 
 On  | 
 Collision detected on network  | 
| 
 COL  | 
 Unidentified  | 
 Off  | 
 No collision detected on network  | 
| 
 LINK  | 
 Unidentified  | 
 On  | 
 UTP link is good  | 
| 
 LINK  | 
 Unidentified  | 
 Off  | 
 UTP link is broken  | 
| 
 POL  | 
 Unidentified  | 
 On  | 
 Polarity is good  | 
| 
 POL  | 
 Unidentified  | 
 Off  | 
 Polarity is reversed  |