XIRCOM, INC.
NETWAVE ACCESS POINT FOR ETHERNET
| 
 NIC Type  | 
 Proprietary wireless  | 
| 
 Chip Set  | 
 Unidentified  | 
| 
 Maximum Onboard Memory  | 
 512KB SRAM/256K flash RAM  | 
| 
 Data Bus  | 
 PCMCIA Type II  | 
| 
 Network Transfer Rate  | 
 1Mbps  | 
| 
 Topology  | 
 Star/Peer-to-peer  | 
| 
 Wiring Type  | 
 N/A  | 
| 
 Boot ROM  | 
 Not available  | 
| 
 DIAGNOSTIC LED(S)  | ||||
| 
 LED  | 
 Color  | 
 Status  | 
 Installation  | 
 Condition  | 
| 
 LED1  | 
 Green  | 
 On  | 
 Computer  | 
 Radio connection to Access Point  | 
| 
 LED1  | 
 Green  | 
 On  | 
 Access Point  | 
 Radio connection to at least one computer  | 
| 
 LED1  | 
 Green  | 
 Off  | 
 Computer  | 
 No radio connection to Access Point  | 
| 
 LED1  | 
 Green  | 
 Off  | 
 Access Point  | 
 No radio connection to a computer  | 
| 
 LED1  | 
 Green  | 
 Blinking  | 
 Computer  | 
 Radio connection directly to another computer  | 
| 
 LED2  | 
 Amber  | 
 Blinking  | 
 Either  | 
 Network is transmitting or receiving  | 
| 
 LED2  | 
 Amber  | 
 Off  | 
 Either  | 
 Network is not transmitting or receiving  | 
| 
 MISCELLANEOUS TECHNICAL NOTES  | 
| 
 This card can be installed into either a computer’s PCMCIA slot or the PCMCIA slot on a Xircom Access Point module.  |