EXABYTE CORPORATION
ELIANT 820 (EXTERNAL)
| 
 Device Type  | 
 Tape Drive  | 
| 
 Interface  | 
 SCSI  | 
| 
 Format  | 
 DDS  | 
| 
 Sustained Transfer Rate  | 
 1MBPS (compression disabled) / 2MBPS (compression enabled)  | 
| 
 Size  | 
 5.25 in. half height  | 
| 
 View  | 
 Top  | 
| 
 CONNECTIONS  | |
| 
 Function  | 
 Label  | 
| 
 Monitor connector (exact function unidentified)  | 
 CN1  | 
| 
 DRIVE SELECT ID  | 
| 
 Note: SCSI ID is selected by activating SW1 until the desired number is displayed in the viewing window.  | 
| 
 MANUFACTURERS RECOMMENDED MEDIA  | ||
| 
 Tape  | 
 Capacity Without Compression  | 
 Capacity With Compression  | 
| 
 EXATAPE 8mm 160mXL  | 
 7.0GB  | 
 14.0GB  | 
| 
 DIAGNOSTIC LED(S)  | |||
| 
 LED1 (Amber)  | 
 LED2 (Green)  | 
 LED3 (Green)  | 
 Condition  | 
| 
 On  | 
 On  | 
 On  | 
 Power-on self-test  | 
| 
 Fast flash  | 
 Irregular flash  | 
 Off  | 
 Power-on self-test failure  | 
| 
 Off  | 
 Irregular flash  | 
 Off  | 
 Drive ready (no tape loaded)  | 
| 
 Off  | 
 Irregular flash  | 
 On  | 
 Drive ready (tape loaded)  | 
| 
 Off  | 
 Irregular flash  | 
 Slow flash  | 
 Normal tape motion  | 
| 
 Off  | 
 Irregular flash  | 
 Fast flash  | 
 High speed tape motion  | 
| 
 On  | 
 Irregular flash  | 
 On  | 
 SCSI bus reset  | 
| 
 Slow flash  | 
 N/A  | 
 Off  | 
 Drive error  | 
| 
 Fast flash  | 
 N/A  | 
 Fast flash  | 
 Cleaning required  | 
| 
 Off  | 
 Irregular flash  | 
 Slow flash  | 
 Cleaning in progress  | 
| 
 DIAGNOSTIC LED(S) CONTINUED  | |||
| 
 LED  | 
 Color  | 
 Status  | 
 Condition  | 
| 
 LED4  | 
 Unidentified  | 
 On  | 
 Power to drive enabled  | 
| 
 LED4  | 
 Unidentified  | 
 Off  | 
 Power to drive disabled  | 
| 
 MISCELLANEOUS TECHNICAL NOTES  | 
| 
 Exact location of terminating resistors is unidentified.  |