ACTIONTEC ELECTRONICS, INC
COMNET 144
| 
 Card Type  | 
 Fax, Modem (synchronous/asynchronous), Network Interface Card  | 
| 
 Chip Set  | 
 Unidentified  | 
| 
 I/O Options  | 
 Ethernet 10BaseT connector  | 
| 
 NIC Type  | 
 Ethernet  | 
| 
 Network Transfer Rate  | 
 10Mbps  | 
| 
 Maximum Modem Rate  | 
 14.4Kbps  | 
| 
 Maximum Fax Rate  | 
 14.4Kbps  | 
| 
 Data Bus  | 
 PCMCIA Type II  | 
| 
 Fax Class  | 
 Class I & II  | 
| 
 Data Modulation Protocol  | 
 Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis  | 
| 
 Fax Modulation Protocol  | 
 ITU-T V.17, V.21CH2, V.27ter, V.29  | 
| 
 Error Correction/Compression  | 
 MNP5, V.42, V.42bis  | 
| 
 Topology  | 
 Star  | 
| 
 Wiring Type  | 
 Unshielded twisted pair  | 
| 
 Boot ROM  | 
 Not available  | 
V2291
| 
 SUPPORTED COMMAND SET  | 
| 
 Basic AT Commands  | 
| 
 AT, ‘Comma’, A/  | 
| 
 A, B, C, E, F, H, L, M, N, O, Q, S, V, W, X, Z  | 
| 
 &C, &D, &F, &T, &V, &W, &X, &Z  | 
| 
 Extended AT Commands  | 
| 
 \A, \B, \G, \J, \K, \L,  | 
| 
 %C, %E, %L, %Q, %TT  | 
| 
 S Registers  | 
| 
 S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25  | 
| 
 S26, S27, S28, S29, S30, S31, S32, S33, S36, S37, S39, S40, S41, S46, S48, S82, S86, S91, S92  | 
| 
 S95, S99  | 
| 
 Special Commands  | 
| 
 *H, -K, -Q, )M,  | 
| 
 Note: See MHI Help file for full command documentation. | 
Proprietary AT Command Set
See document V2286 for a full command summary.