APACHE MICRO PERIPHERALS, INC.
APACHE 1414I-M
| 
 Card Type  | 
 Modem (asynchronous)  | 
| 
 Chip Set  | 
 Rockwell ACi  | 
| 
 I/O Options  | 
 None  | 
| 
 Maximum Data Rate  | 
 14.4Kbps  | 
| 
 Maximum Fax Rate  | 
 14.4Kbps  | 
| 
 Data Bus  | 
 Unidentified  | 
| 
 Fax Class  | 
 Unidentified  | 
| 
 Data Modulation Protocol  | 
 Unidentified  | 
| 
 Fax Modulation Protocol  | 
 Unidentified  | 
| 
 Error Correction/Compression  | 
 MNP5, V.42, V.42bis  | 
52993
| 
 USER CONFIGURABLE SETTINGS  | ||
| 
 Setting  | 
 Label  | 
 Position  | 
| 
 í Factory configured - do not alter | 
 SW1/7  | 
 Unidentified  | 
| 
 í Factory configured - do not alter | 
 SW1/8  | 
 N/A  | 
Note: SW1/8 may not be present on all models.  | ||
| 
 INTERRUPT SELECTION  | ||||
| 
 Setting  | 
 SW1/1  | 
 SW1/2  | 
 SW1/3  | 
 SW1/4  | 
| 
 í IRQ3 | 
 Off  | 
 Off  | 
 Off  | 
 On  | 
| 
 IRQ4  | 
 Off  | 
 Off  | 
 On  | 
 Off  | 
| 
 IRQ5  | 
 Off  | 
 On  | 
 Off  | 
 Off  | 
| 
 IRQ7  | 
 On  | 
 Off  | 
 Off  | 
 Off  | 
| 
 SERIAL PORT ADDRESS SELECTION  | ||
| 
 Setting  | 
 SW1/5  | 
 SW1/6  | 
| 
 3F8h (COM1:)  | 
 On  | 
 On  | 
| 
 2F8h (COM2:)  | 
 Off  | 
 On  | 
| 
 3E8h (COM3:)  | 
 On  | 
 Off  | 
| 
 í 2E8h (COM4:) | 
 Off  | 
 Off  | 
| 
 MISCELLANEOUS TECHNICAL NOTE  | 
| 
 Diagram not available.  | 
| 
 SUPPORTED STANDARD COMMANDS  | 
| 
 Basic AT Commands  | 
| 
 +++, ‘comma’, A/  | 
| 
 A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z  | 
| 
 &C, &D, &F, &G, &K, &L, &Q, &R, &S, &T, &V, &W, &Y, &Z  | 
| 
 Extended AT Commands  | 
| 
 \A, \B, \G, \K, \L, \N  | 
| 
 %C, %E, %L, %Q  | 
| 
 S-Registers  | 
| 
 S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, S16, S18, S21, S22, S23, S25, S26, S27  | 
| 
 S30, S36, S38, S46, S48, S82, S86, S95  | 
Note: See MHI documentation for complete information. Registers S39, S40, and S41 are unidentified bit-mapped registers.  | 
Proprietary AT Command Set
See APACHE MICRO PERIPHERALS, INC. APACHE 1414I-V for a full command summary.