ASCEND COMMUNICATIONS, INC.
MULTIBAND PLUS - SW56
| 
 Card Type  | 
 CSU  | 
| 
 Chip Set  | 
 Unidentified  | 
| 
 I/O Options  | 
 AC power connector, power switch, serial port, network interface via RJ-48 connector (8), palmtop port via RJ-12 connector (2),data port via 44-pin connector (4)  | 
| 
 Wiring Type  | 
 RJ-48 Unshielded Twisted Pair  | 
| 
 Network Transfer Rate  | 
 Unidentified  | 
| 
 Data Bus  | 
 External  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 AC power connector  | 
 CN1  | 
 RJ-48 network interface - line 1  | 
 CN9  | 
| 
 Serial port  | 
 CN2  | 
 RJ-48 network interface - line 2  | 
 CN10  | 
| 
 44-pin DTE port 1  | 
 CN3  | 
 RJ-48 network interface - line 3  | 
 CN11  | 
| 
 RJ-12 palmtop connector  | 
 CN4  | 
 RJ-48 network interface - line 4  | 
 CN12  | 
| 
 RJ-12 palmtop connector  | 
 CN5  | 
 RJ-48 network interface - line 5  | 
 CN13  | 
| 
 44-pin DTE port 2  | 
 CN6  | 
 RJ-48 network interface - line 6  | 
 CN14  | 
| 
 44-pin DTE port 3  | 
 CN7  | 
 RJ-48 network interface - line 7  | 
 CN15  | 
| 
 44-pin DTE port 4  | 
 CN8  | 
 Power  | 
 SW1  | 
| 
 DIAGNOSTIC LEDS  | |||
| 
 LED  | 
 Color  | 
 Status  | 
 Condition  | 
| 
 PW  | 
 Green  | 
 On  | 
 Power is on  | 
| 
 PW  | 
 Green  | 
 Off  | 
 Power is off  | 
| 
 ER  | 
 Red  | 
 On  | 
 Self test in progress  | 
| 
 ER  | 
 Red  | 
 Blinking  | 
 Device is not functional due to fault or error  | 
| 
 ER  | 
 Red  | 
 Off  | 
 Device is functional  | 
| 
 P1  | 
 Green  | 
 On  | 
 Channel 1 is active  | 
| 
 P1  | 
 Green  | 
 Blinking  | 
 Device is in diagnostic mode. BERT, auto-BERT, remote loopback, or local loopback test in progress  | 
| 
 P1  | 
 Green  | 
 Off  | 
 Channel 1 is inactive  | 
| 
 P2  | 
 Green  | 
 On  | 
 Channel 2 is active  | 
| 
 P2  | 
 Green  | 
 Blinking  | 
 Device is in diagnostic mode. BERT, auto-BERT, remote loopback, or local loopback test in progress  | 
| 
 P2  | 
 Green  | 
 Off  | 
 Channel 2 is inactive  | 
| 
 P3  | 
 Green  | 
 On  | 
 Channel 3 is active  | 
| 
 P3  | 
 Green  | 
 Blinking  | 
 Device is in diagnostic mode. BERT, auto-BERT, remote loopback, or local loopback test in progress  | 
| 
 P3  | 
 Green  | 
 Off  | 
 Channel 3 is inactive  | 
| 
 P4  | 
 Green  | 
 On  | 
 Channel 4 is active  | 
| 
 P4  | 
 Green  | 
 Blinking  | 
 Device is in diagnostic mode. BERT, auto-BERT, remote loopback, or local loopback test in progress  | 
| 
 P4  | 
 Green  | 
 Off  | 
 Channel 4 is inactive  | 
| 
 L1  | 
 Green  | 
 On  | 
 Link is good on line 1  | 
| 
 L1  | 
 Green  | 
 Blinking  | 
 Connection established in line profile, but calls cannot be sent or received on line 1  | 
| 
 L1  | 
 Green  | 
 Off  | 
 Link is broken on line 1  | 
| 
 L2  | 
 Green  | 
 On  | 
 Link is good on line 2  | 
| 
 L2  | 
 Green  | 
 Blinking  | 
 Connection established in line profile, but calls cannot be sent or received on line 2  | 
| 
 L2  | 
 Green  | 
 Off  | 
 Link is broken on line 2  | 
| 
 L3  | 
 Green  | 
 On  | 
 Link is good on line 3  | 
| 
 L3  | 
 Green  | 
 Blinking  | 
 Connection established in line profile, but calls cannot be sent or received on line 3  | 
| 
 L3  | 
 Green  | 
 Off  | 
 Link is broken on line 3  | 
| 
 L4  | 
 Green  | 
 On  | 
 Link is good on line 4  | 
| 
 L4  | 
 Green  | 
 Blinking  | 
 Connection established in line profile, but calls cannot be sent or received on line 4  | 
| 
 L4  | 
 Green  | 
 Off  | 
 Link is broken on line 4  | 
| 
 L5  | 
 Green  | 
 On  | 
 Link is good on line 5  | 
| 
 L5  | 
 Green  | 
 Blinking  | 
 Connection established in line profile, but calls cannot be sent or received on line 5  | 
| 
 L5  | 
 Green  | 
 Off  | 
 Link is broken on line 5  | 
| 
 L6  | 
 Green  | 
 On  | 
 Link is good on line 6  | 
| 
 L6  | 
 Green  | 
 Blinking  | 
 Connection established in line profile, but calls cannot be sent or received on line 6  | 
| 
 L6  | 
 Green  | 
 Off  | 
 Link is broken on line 6  | 
| 
 L7  | 
 Green  | 
 On  | 
 Link is good on line 7  | 
| 
 L7  | 
 Green  | 
 Blinking  | 
 Connection established in line profile, but calls cannot be sent or received on line 7  | 
| 
 L7  | 
 Green  | 
 Off  | 
 Link is broken on line 7  |