DIGICOM SYSTEMS
SCOUT PLUS (INTERNAL)
| 
 Card Type  | 
 Modem, Fax  | 
| 
 Chip Set  | 
 Unidentified  | 
| 
 I/O Options  | 
 Line in (RJ-11), line out (RJ11)  | 
| 
 Maximum Modem Rate  | 
 14.4Kbps  | 
| 
 Maximum Fax Rate  | 
 9600bps  | 
| 
 Data Modulation Protocol  | 
 Bell 212A, ITU-T V.22, V.22bis, V.32, V.32bis  | 
| 
 Fax Modulation Protocol  | 
 V.27ter, V.29  | 
| 
 Error Correction/Compression  | 
 MNP5, V.42, V42bis  | 
| 
 Fax Class  | 
 Class I & II  | 
| 
 Data Bus  | 
 8-bit ISA  | 

| 
 CONNECTIONS  | ||||||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | |||
| 
 RJ-11 line  | 
 CN1  | 
 RJ-11 line  | 
 CN2  | |||
| 
 USER CONFIGURABLE SETTINGS  | ||
| 
 Function  | 
 Label  | 
 Position  | 
| 
 Normal operation enabled  | 
 SW1/1  | 
 On  | 
| 
 Modem reset  | 
 SW1/1  | 
 Off  | 
| 
 í Factory configured - do not alter | 
 SW1/2  | 
 Off  | 
| 
 SERIAL PORT ADDRESS  | ||
| 
 Setting  | 
 SW1/3  | 
 SW1/4  | 
| 
 COM1 (3F8h)  | 
 Off  | 
 Off  | 
| 
 COM2 (2F8h)  | 
 On  | 
 Off  | 
| 
 COM3 (3E8h)  | 
 Off  | 
 On  | 
| 
 COM4 (2E8h)  | 
 On  | 
 On  | 
| 
 SUPPORTED COMMAND SET  | 
| 
 Basic AT Commands  | 
| 
 AT, A/, +++  | 
| 
 A, E, H, M, 0, V, Z  | 
| 
 &F, &T, &Z  | 
| 
 S Registers  | 
| 
 S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S26  | 
| 
 Note: See MHI Help file for full command documentation. | 
PROPRIETARY AT COMMAND SET
For a full command summary see DIGICOM SYSTEMS, SCOUT PLUS (EXTERNAL)