MT5634ZLX/E, MT5634ZLX/E-T/2

MULTI-TECH SYSTEMS, INC.

Card Type

Modem

Chip Set

Unidentified

Maximum Modem Rate

56Kbps

Maximum Fax Rate

14.4Kbps

Data Modulation Protocol

Bell 103/212A

ITU-T V.22, V.22bis, V.32ter, V.32bis, V.34, K56flex, V.90

Fax Modulation Protocol

ITU-T V.17, V.29

Error Correction/Compression

MNP5, V.42, V.42bis

Fax Class

Class I & II

Data Bus

PCMCIA

55301

SUPPORTED COMMAND SET

Basic AT Commands

AT, ‘+++’, A/

A, E, H, M, P, T, V, W, X, Z

&C, &F, &G, &R, &T, &W, &Y, &Z

Extended AT Commands

\A, \C, \G, \J, \K, \V, \X

%A, %G

Special Commands

"H, -J

S Registers

S0, S1, S2, S3, S4, S6, S7, S8, S9, S10, S11, S12, S18, S25, S30

Note: See MHI Help File for full command documentation.

Proprietary AT Command Set

AUTO-MODE DETECTION

Type:

Configuration

Format:

AT [cmds] Nn [cmds]

Description:

Selects various options for the automatic detection and negotiation of protocols during the handshake process if the modem is communicating with a remote modem of dissimilar speed.

Command

Function

N0

Auto-mode detection disabled. Handshake begins at line speed designated by the S37 register and the B command.

í N1

Auto-mode detection enabled. Handshake begins at line speed designated by the S37 register and the B command. Fallback to lower speed if necessary unless in \N1 mode

COMMUNICATIONS MODE

Type:

Configuration

Format:

AT [cmds] &Mn [cmds]

Description:

Selects communications mode

Command

Mode

í &M0

Asynchronous mode

&M4

Hayes autosynchronous mode

COMMUNICATION PROTOCOLS

Type:

Configuration

Format:

AT [cmds] Bn [cmds]

Description:

Selects the communication protocol for data calls

Note: The B command allows the simultaneous selection of more than one suffix, enabling multiple protocols.

Command

Protocol

B0

ITU-T V.22 at 1200bps or V.21 at 300bps

í B1

Bell 212A at 1200bps/Bell 103 at 300bps

B2

ITU-T V.23 at 75/1200bps originate; 1200/75bps answer

B3

ITU-T V.23 at 1200/75bps answer; 75/1200bps originate

CONFIGURATION PROFILES & CALL STATISTICS

Type:

Immediate

Format:

AT [cmds] &V [cmds]

Description:

Displays active and stored configuration profiles & statistics for last connection

Command

Function

&V0

Displays the active configuration, the two stored user profiles, and the first four phone numbers

&V1

Displays statistics for last connection

DATA SET READY (DSR)

Type:

Configuration

Format:

AT [cmds] &Sn [cmds]

Description:

Selects DSR options

Command

Function

í &S0

DSR forced high

&S1

DSR high only while modem is connected

DATA TERMINAL READY (DTR)

Type:

Configuration

Format:

AT [cmds] &Dn [cmds]

Description:

Selects modem response to DTR

Command

Function

&D0

Modem does not respond to DTR

&D1

Modem goes to command mode on DTR toggle

í &D2

Modem goes to command mode and disconnects (hangs up) on DTR toggle;

Auto-Answer is disabled on low DTR.

&D3

Modem is initialized on DTR toggle

DIAL

Type:

Immediate

Format:

AT [cmds] D<#> [cmds]

Description:

Dials telephone number according to any modifiers included in the string

Note:

Any combination of modifiers can be used to produce the desired dial functions in sequence.

Command

Function

DP

Pulse dialing enabled

DSn

Dial stored telephone number n

DT

Tone dialing enabled/Pulse dialing disabled

DW

Dialing resumed following dial tone detection

D,

Dialing paused for amount of time specified in S8 register

D!

Flash function initiated. Modem commanded to go off-hook for specified time before returning on-hook.

D@

Wait for quiet Answer function enabled. Modem waits until a "quiet answer," a ring-back signal followed by silence up to the time specified in S7, is received prior to executing the rest of the dial string.

D$

Calling card "Bong" detection enabled

D;

Modem returned to idle state after dialing. The semicolon can only be placed at the end of the dial command.

FLOW CONTROL

Type:

Configuration

Format:

AT [cmds] &Kn [cmds]

Description:

Enables flow control options

Command

Function

&K0

Flow control disabled

í &K3

RTS/CTS flow control enabled

&K4

XON/XOFF flow control enabled

JACK TYPE

Type:

Configuration

Format:

AT [cmds] &Jn [cmds]

Description:

Command non-functional; for compatability purposes only

Command

Function

&J0

Send OK to DTE

&J1

Send OK to DTE

ON-LINE

Type:

Immediate

Format:

AT [cmds] On [cmds]

Description:

Controls on-line command (data transmission) state options.

Note: The O command must be placed at the end of the command string.

Command

Function

O0

On-line command mode with no retraining enabled

O1

On-line command mode with retraining enabled

O3-O14

Force modem to new rate defined by register S62

PULSE DIALING RATIO (INTERNATIONAL VERSION)

Type:

Configuration

Format:

AT [cmds] &Pn [cmds]

Description:

Selects pulse dial make/break ratio

Command

Function

&P0

39/61ms at 10pps (North America)

&P1

33/67ms at 10pps (Europe)

PULSE DIALING RATIO (JAPAN VERSION)

Type:

Configuration

Format:

AT [cmds] &Pn [cmds]

Description:

Selects pulse dial make/break ratio

Command

Function

&P0

33/67ms at 10pps (Europe)

&P1

33/67ms at 20pps

RESULT CODES

Type:

Configuration

Format:

AT [cmds] Qn [cmds]

Description:

Enables modem to send result codes to the DTE

Command

Function

í Q0

Result code sending enabled

Q1

Result code sending disabled

Q2

Dumb answer mode enabled

SPEAKER VOLUME

Type:

Configuration

Format:

AT [cmds] Ln [cmds]

Description:

Controls speaker volume

Command

Function

L0

Low volume setting

L1

Low volume setting

í L2

Medium volume setting

L3

Highest volume setting

V.32 - AUTO-RETRAIN

Type:

Configuration

Format:

AT [cmds] &Bn [cmds]

Description:

Controls auto-retrain function if poor line quality is detected

Command

Function

&B0

Auto-retrain disabled, modem hangs-up

í &B1

Auto-retrain enabled if line quality is poor. Hang-up if condition persists longer than threshold set by register S7

&B2

Modem tolerates any line

Extended AT Commands

COMPRESSION

Type:

Configuration

Format:

AT [cmds] %Cn [cmds]

Description:

Selects data compression

Command

Function

%C0

Data compression disabled

í %C1

MNP5 enabled

CONNECT MODE

Type:

Configuration

Format:

AT [cmds] \Nn [cmds]

Description:

Controls the type of connection the modem will operate in

Command

Function

\N0

Normal mode enabled

\N1

Direct mode enabled

\N2

Reliable mode enabled

í \N3

Auto-reliable mode enabled

\N4

V.42 reliable mode enabled

FLOW CONTROL TYPE

Type:

Configuration

Format:

AT [cmds] \Qn [cmds]

Description:

Sets type of flow control used by modem

Command

Function

\Q0

Flow control disabled

\Q1

Bi-directional XON/XOFF flow control enabled

\Q3

Bi-directional RTS/CTS flow control enabled

INACTIVITY TIMER

Type:

Configuration

Format:

AT [cmds] \Tn [cmds]

Range:

0-90

Unit:

1 minute

Description:

Sets the length of time that the modem does not receive information before it disconnects.

SPECIAL COMMANDS

DIALING MESSAGE CONTROL

Type:

Configuration

Format:

AT [cmds] %Mn [cmds]

Description:

Controls the output of dialing message when dialing a number stored in memory

Command

Function

í %M0

Dialing message disabled

%M1

Dialing message enabled

FIRMWARE VERSION

Type:

Immidiate

Format:

AT [cmds] -V [cmds]

Description:

Displays firmware version number

SERIAL PORT BAUD RATE

Type:

Configuration

Format:

AT [cmds] $SBn [cmds]

Description:

Sets the maximum allowable data exchange rate at serial port

Command

Function

$SB300

300bps

$SB1200

1200bps

$SB2400

2400bps

$SB4800

4800bps

$SB9600

9600bps

$SB19200

19.2Kbps

$SB38400

38.4Kbps

$SB57600

57.6Kbps

í $SB115200

115.2Kbps

S(STATUS) -REGISTERS

BACKSPACE CHARACTER

Type:

Register

Format

AT [cmds] S5=n [cmds]

Range:

0-127

Unit:

ASCII

Description:

Selects a character used for backspace <BS>

Note: A value greater than 32 will disable backspace

DCE LINE SPEED

Type:

Register

Format

AT [cmds] S37=n [cmds]

Description:

Sets the maximum allowable data exchange rate attempted during handshake process.

Command

Function

í S37=0

Speed of last connection

S37=3

300bps

S37=5

1200bps

S37=6

2400bps

S37=7

4800bps

S37=8

7200bps

S37=9

9600bps

S37=10

12.0Kbps

S37=11

14.4Kbps

S37=12

16.8Kbps

S37=13

19.2Kbps

S37=14

21.6Kbps

S37=15

24.0Kbps

S37=16

26.4Kbps

S37=17

28.8Kbps

S37=18

33.6Kbps

DTE RATE STATUS

Type:

Register

Format

AT [cmds] S62=n [cmds]

Description:

Sets the DTE rate status

Command

Function

S62=0

300bps

S62=1

600bps

S62=2

1200bps

S62=3

2400bps

S62=4

4800bps

S62=5

9600bps

S62=6

7200bps

S62=7

12.0Kbps

S62=8

14.4Kbps

S62=9

16.8Kbps

S62=10

19.2Kbps

S62=11

21.6Kbps

S62=12

24.0Kbps

S62=13

26.4Kbps

S62=14

28.8Kbps

S62=15

38.4Kbps

í S62=16

57.6Kbps

S62=17

115.2Kbps

DTE TRANSFER SPEED

Type:

Register

Format

AT [cmds] S72=n [cmds]

Description:

Sets the DTE speed during data transfer

Command

Function

í S72=0

Last auto-baud

S72=1

300bps

S72=2

600bps

S72=3

1200bps

S72=4

2400bps

S72=5

4800bps

S72=6

9600bps

S72=7

7200bps

S72=8

12.0Kbps

S72=9

14.4Kbps

S72=10

16.8Kbps

S72=11

19.2Kbps

S72=12

21.6Kbps

S72=13

24.0Kbps

S72=14

26.4Kbps

S72=15

28.8Kbps

S72=16

38.4Kbps

S72=17

57.6Kbps

S72=18

115.2Kbps

TRANSMISSION LEVEL (JAPAN)

Type

Register or Configuration

Format

AT [cmds] S64=n [cmds]

Range

9-20

Default

15

Unit

-1 dBm

Description

Sets the signal level for transmission (Japan version)

V.90 DOWNSTREAM DATA RATE

Type:

Register

Format

AT [cmds] S38=n [cmds]

Description:

Sets the maximum allowable V.90 downstream rate attempted during handshake process.

Command

Function

S38=0

56K disabled

S38=1

56K automatic speed select

S38=2

29.3Kbps

S38=3

30.6Kbps

S38=4

32.0Kbps

S38=5

33.3Kbps

S38=6

34.6Kbps

S38=7

36.0Kbps

S38=8

37.3Kbps

S38=9

38.6Kbps

S38=10

40.0Kbps

S38=11

41.3Kbps

S38=12

42.6Kbps

S38=13

44.0Kbps

S38=14

45.3Kbps

S38=15

46.6Kbps

S38=16

48.0Kbps

S38=17

49.3Kbps

S38=18

50.6Kbps

S38=19

52.0Kbps

S38=20

53.3Kbps

S38=21

54.6Kbps

S38=22

56.0Kbps

V.90 MODE SELECTION

Type:

Register

Format:

AT [cmds] S109=n [cmds]

Description:

Selects modem operating mode

Command

Function

í S109=0

V.90 disabled

S109=1

K56flex or V.90 mode enabled

S109=2

V.90 mode enabled; K56flex disabled

Card Type	Modem
Chip Set	Unidentified
Maximum Modem Rate	56Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation Protocol	Bell 103/212A ITU-T V.22, V.22bis, V.32ter, V.32bis, V.34, K56flex, V.90
Fax Modulation Protocol	ITU-T V.17, V.29
Error Correction/Compression	MNP5, V.42, V.42bis
Fax Class	Class I & II
Data Bus	PCMCIA

AUTO-MODE DETECTION
Type:	Configuration
Format:	AT [cmds] Nn [cmds]
Description:	Selects various options for the automatic detection and negotiation of protocols during the handshake process if the modem is communicating with a remote modem of dissimilar speed.
Command	Function
N0	Auto-mode detection disabled. Handshake begins at line speed designated by the S37 register and the B command.
í N1	Auto-mode detection enabled. Handshake begins at line speed designated by the S37 register and the B command. Fallback to lower speed if necessary unless in \N1 mode

COMMUNICATIONS MODE
Type:	Configuration
Format:	AT [cmds] &Mn [cmds]
Description:	Selects communications mode
Command	Mode
í &M0	Asynchronous mode
&M4	Hayes autosynchronous mode

COMMUNICATION PROTOCOLS
Type:	Configuration
Format:	AT [cmds] Bn [cmds]
Description:	Selects the communication protocol for data calls
Note: The B command allows the simultaneous selection of more than one suffix, enabling multiple protocols.
Command	Protocol
B0	ITU-T V.22 at 1200bps or V.21 at 300bps
í B1	Bell 212A at 1200bps/Bell 103 at 300bps
B2	ITU-T V.23 at 75/1200bps originate; 1200/75bps answer
B3	ITU-T V.23 at 1200/75bps answer; 75/1200bps originate

CONFIGURATION PROFILES & CALL STATISTICS
Type:	Immediate
Format:	AT [cmds] &V [cmds]
Description:	Displays active and stored configuration profiles & statistics for last connection
Command	Function
&V0	Displays the active configuration, the two stored user profiles, and the first four phone numbers
&V1	Displays statistics for last connection

DATA SET READY (DSR)
Type:	Configuration
Format:	AT [cmds] &Sn [cmds]
Description:	Selects DSR options
Command	Function
í &S0	DSR forced high
&S1	DSR high only while modem is connected

DATA TERMINAL READY (DTR)
Type:	Configuration
Format:	AT [cmds] &Dn [cmds]
Description:	Selects modem response to DTR
Command	Function
&D0	Modem does not respond to DTR
&D1	Modem goes to command mode on DTR toggle
í &D2	Modem goes to command mode and disconnects (hangs up) on DTR toggle; Auto-Answer is disabled on low DTR.
&D3	Modem is initialized on DTR toggle

DIAL
Type:	Immediate
Format:	AT [cmds] D<#> [cmds]
Description:	Dials telephone number according to any modifiers included in the string
Note:	Any combination of modifiers can be used to produce the desired dial functions in sequence.
Command	Function
DP	Pulse dialing enabled
DSn	Dial stored telephone number n
DT	Tone dialing enabled/Pulse dialing disabled
DW	Dialing resumed following dial tone detection
D,	Dialing paused for amount of time specified in S8 register
D!	Flash function initiated. Modem commanded to go off-hook for specified time before returning on-hook.
D@	Wait for quiet Answer function enabled. Modem waits until a "quiet answer," a ring-back signal followed by silence up to the time specified in S7, is received prior to executing the rest of the dial string.
D$	Calling card "Bong" detection enabled
D;	Modem returned to idle state after dialing. The semicolon can only be placed at the end of the dial command.

FLOW CONTROL
Type:	Configuration
Format:	AT [cmds] &Kn [cmds]
Description:	Enables flow control options
Command	Function
&K0	Flow control disabled
í &K3	RTS/CTS flow control enabled
&K4	XON/XOFF flow control enabled

JACK TYPE
Type:	Configuration
Format:	AT [cmds] &Jn [cmds]
Description:	Command non-functional; for compatability purposes only
Command	Function
&J0	Send OK to DTE
&J1	Send OK to DTE

ON-LINE
Type:	Immediate
Format:	AT [cmds] On [cmds]
Description:	Controls on-line command (data transmission) state options.
Note: The O command must be placed at the end of the command string.
Command	Function
O0	On-line command mode with no retraining enabled
O1	On-line command mode with retraining enabled
O3-O14	Force modem to new rate defined by register S62

PULSE DIALING RATIO (JAPAN VERSION)
Type:	Configuration
Format:	AT [cmds] &Pn [cmds]
Description:	Selects pulse dial make/break ratio
Command	Function
&P0	33/67ms at 10pps (Europe)
&P1	33/67ms at 20pps

RESULT CODES
Type:	Configuration
Format:	AT [cmds] Qn [cmds]
Description:	Enables modem to send result codes to the DTE
Command	Function
í Q0	Result code sending enabled
Q1	Result code sending disabled
Q2	Dumb answer mode enabled

SPEAKER VOLUME
Type:	Configuration
Format:	AT [cmds] Ln [cmds]
Description:	Controls speaker volume
Command	Function
L0	Low volume setting
L1	Low volume setting
í L2	Medium volume setting
L3	Highest volume setting

V.32 - AUTO-RETRAIN
Type:	Configuration
Format:	AT [cmds] &Bn [cmds]
Description:	Controls auto-retrain function if poor line quality is detected
Command	Function
&B0	Auto-retrain disabled, modem hangs-up
í &B1	Auto-retrain enabled if line quality is poor. Hang-up if condition persists longer than threshold set by register S7
&B2	Modem tolerates any line

COMPRESSION
Type:	Configuration
Format:	AT [cmds] %Cn [cmds]
Description:	Selects data compression
Command	Function
%C0	Data compression disabled
í %C1	MNP5 enabled

CONNECT MODE
Type:	Configuration
Format:	AT [cmds] \Nn [cmds]
Description:	Controls the type of connection the modem will operate in
Command	Function
\N0	Normal mode enabled
\N1	Direct mode enabled
\N2	Reliable mode enabled
í \N3	Auto-reliable mode enabled
\N4	V.42 reliable mode enabled

FLOW CONTROL TYPE
Type:	Configuration
Format:	AT [cmds] \Qn [cmds]
Description:	Sets type of flow control used by modem
Command	Function
\Q0	Flow control disabled
\Q1	Bi-directional XON/XOFF flow control enabled
\Q3	Bi-directional RTS/CTS flow control enabled

INACTIVITY TIMER
Type:	Configuration
Format:	AT [cmds] \Tn [cmds]
Range:	0-90
Unit:	1 minute
Description:	Sets the length of time that the modem does not receive information before it disconnects.

DIALING MESSAGE CONTROL
Type:	Configuration
Format:	AT [cmds] %Mn [cmds]
Description:	Controls the output of dialing message when dialing a number stored in memory
Command	Function
í %M0	Dialing message disabled
%M1	Dialing message enabled

FIRMWARE VERSION
Type:	Immidiate
Format:	AT [cmds] -V [cmds]
Description:	Displays firmware version number

SERIAL PORT BAUD RATE
Type:	Configuration
Format:	AT [cmds] $SBn [cmds]
Description:	Sets the maximum allowable data exchange rate at serial port
Command	Function
$SB300	300bps
$SB1200	1200bps
$SB2400	2400bps
$SB4800	4800bps
$SB9600	9600bps
$SB19200	19.2Kbps
$SB38400	38.4Kbps
$SB57600	57.6Kbps
í $SB115200	115.2Kbps

BACKSPACE CHARACTER
Type:	Register
Format	AT [cmds] S5=n [cmds]
Range:	0-127
Unit:	ASCII
Description:	Selects a character used for backspace <BS>
Note: A value greater than 32 will disable backspace

DCE LINE SPEED
Type:	Register
Format	AT [cmds] S37=n [cmds]
Description:	Sets the maximum allowable data exchange rate attempted during handshake process.
Command	Function
í S37=0	Speed of last connection
S37=3	300bps
S37=5	1200bps
S37=6	2400bps
S37=7	4800bps
S37=8	7200bps
S37=9	9600bps
S37=10	12.0Kbps
S37=11	14.4Kbps
S37=12	16.8Kbps
S37=13	19.2Kbps
S37=14	21.6Kbps
S37=15	24.0Kbps
S37=16	26.4Kbps
S37=17	28.8Kbps
S37=18	33.6Kbps

DTE RATE STATUS
Type:	Register
Format	AT [cmds] S62=n [cmds]
Description:	Sets the DTE rate status
Command	Function
S62=0	300bps
S62=1	600bps
S62=2	1200bps
S62=3	2400bps
S62=4	4800bps
S62=5	9600bps
S62=6	7200bps
S62=7	12.0Kbps
S62=8	14.4Kbps
S62=9	16.8Kbps
S62=10	19.2Kbps
S62=11	21.6Kbps
S62=12	24.0Kbps
S62=13	26.4Kbps
S62=14	28.8Kbps
S62=15	38.4Kbps
í S62=16	57.6Kbps
S62=17	115.2Kbps

DTE TRANSFER SPEED
Type:	Register
Format	AT [cmds] S72=n [cmds]
Description:	Sets the DTE speed during data transfer
Command	Function
í S72=0	Last auto-baud
S72=1	300bps
S72=2	600bps
S72=3	1200bps
S72=4	2400bps
S72=5	4800bps
S72=6	9600bps
S72=7	7200bps
S72=8	12.0Kbps
S72=9	14.4Kbps
S72=10	16.8Kbps
S72=11	19.2Kbps
S72=12	21.6Kbps
S72=13	24.0Kbps
S72=14	26.4Kbps
S72=15	28.8Kbps
S72=16	38.4Kbps
S72=17	57.6Kbps
S72=18	115.2Kbps

TRANSMISSION LEVEL (JAPAN)
Type	Register or Configuration
Format	AT [cmds] S64=n [cmds]
Range	9-20
Default	15
Unit	-1 dBm
Description	Sets the signal level for transmission (Japan version)

V.90 DOWNSTREAM DATA RATE
Type:	Register
Format	AT [cmds] S38=n [cmds]
Description:	Sets the maximum allowable V.90 downstream rate attempted during handshake process.
Command	Function
S38=0	56K disabled
S38=1	56K automatic speed select
S38=2	29.3Kbps
S38=3	30.6Kbps
S38=4	32.0Kbps
S38=5	33.3Kbps
S38=6	34.6Kbps
S38=7	36.0Kbps
S38=8	37.3Kbps
S38=9	38.6Kbps
S38=10	40.0Kbps
S38=11	41.3Kbps
S38=12	42.6Kbps
S38=13	44.0Kbps
S38=14	45.3Kbps
S38=15	46.6Kbps
S38=16	48.0Kbps
S38=17	49.3Kbps
S38=18	50.6Kbps
S38=19	52.0Kbps
S38=20	53.3Kbps
S38=21	54.6Kbps
S38=22	56.0Kbps

V.90 MODE SELECTION
Type:			Register
Format:	AT [cmds] S109=n [cmds]
Description:	Selects modem operating mode
Command		Function
í S109=0		V.90 disabled
S109=1		K56flex or V.90 mode enabled
S109=2		V.90 mode enabled; K56flex disabled