TRENDWARE INTERNATIONAL, INC
TFM-288T PCMCIA (LM28 SERIES)
| 
 Card Type  | 
 Fax, Modem (asynchronous), Network Interface Card  | 
| 
 NIC Type  | 
 Ethernet  | 
| 
 Network Transfer Rate  | 
 10Mbps  | 
| 
 Maximum Modem Rate  | 
 28.8Kbps  | 
| 
 Maximum Fax Rate  | 
 14.4Kbps  | 
| 
 Data Bus  | 
 PCMCIA Type II  | 
| 
 Fax Class  | 
 Class I  | 
| 
 Data Modulation Protocol  | 
 Bell103/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis, V.34  | 
| 
 Fax Modulation Protocol  | 
 ITU-T V.17, V.21CH2, V.27ter, V.29  | 
| 
 Error Correction/Compression  | 
 MNP5, V.42, V.42bis  | 
| 
 Topology  | 
 Linear Bus, Star  | 
| 
 Wiring Type  | 
 Unshielded twisted pair RG-58A/U 50ohm coaxial  | 
| 
 I/O Options  | 
 Ethernet 10BASE-T connector, Ethernet 10BASE-2 connector  | 
| 
 Boot ROM  | 
 Not available  | 
52682
| 
 SUPPORTED COMMAND SET  | 
| 
 Basic AT Commands  | 
| 
 AT, ‘+++’, ‘Comma’, A/  | 
| 
 A, C, D, E, H, M, N, P, Q, T, V, W, X, Z  | 
| 
 &C, &D, &F, &G, &K, &R, &S, &T, &V, &W, &X, &Y, &Z  | 
| 
 Extended AT Commands  | 
| 
 \A, \C, \G, \J, \X, %A, %C  | 
| 
 S Registers  | 
| 
 S0, S1, S2, S3, S4, S5, S6, S8, S9, S10, S11, S12, S18, S25, S26, S37  | 
| 
 Note: See MHI Help file for full command documentation. | 
Proprietary AT Command Set
| 
 JACK TYPE  | |
| 
 Type:  | 
 Configuration  | 
| 
 Format:  | 
 AT [cmds] &Jn [cmds]  | 
| 
 Description:  | 
 Selects jack type  | 
| 
 Command  | 
 Jack Type  | 
| 
 í &J0 | 
 RJ-11, RJ-41S, RJ45S  | 
| 
 &J1  | 
 RJ-12, RJ-13  | 
See TRENDWARE INTERNATIONAL, INC, TFM-288P; document for remaining proprietary command summary.