Card Type	Modem (asynchronous), Token Ring
Chipset	Texas Instruments TMS380C25
Maximum Onboard Memory	160KB DRAM/128KB PROM
Network Transfer Rate	4/16Mbps
Maximum Data Rate	14.4Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	PCMCIA Type II
Fax Class	Class I & II
Data Modulation	Bell 103A/212A ITU-T V.21, V.22, V.23, V.22bis, V.32, V.32bis
Fax Modulation	Unidentified
Error Correction/Compression	MNP5, MNP10, V.42, V.42bis
Topology	Token Ring
Wire Type	Shielded/Unshielded twisted pair
Boot ROM	Not available

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, A/

A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z

Extended AT Commands

\A, \B, \G, \J, \K, \L, \N, \W

%C, %L, %Q

Special AT Commands

-K, -Q, *H, )M, @M, :E, +MS

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, S16, S18, S21, S22, S23, S24, S25, S27,

S28, S29, S30, S31, S32, S33, S36, S37, S38, S39, S40, S41, S46, S48, S82, S86, S91, S92, S95,

S99, S201

CALLBACK NUMBER
Type:	Configuration
Format:	AT [cmds] *Pn:xxxx:<#>
Description:	Sets callback number at location n with the password xxxx.

COMMAND SET
Type:	Immediate
Format:	AT [cmds] S80=n [cmds]
Description:	Selects the active command set.
Command		Function
S80=0		Switch to AT command set.
S80=33		Switch to V.25bis command set.

DISPLAY CALLBACK NUMBERS
Type:	Immediate
Format:	AT [cmds] *L [cmds]
Description:	Displays the list of all callback numbers.

END REMOTE CONFIGURATION
Type:	Immediate
Format:	AT [cmds] *E [cmds]
Description:	Ends the remote configuration session currently in progress.

PROTOCOL/SPEED
Type:	Configuration
Format:	AT [cmds] Fn [cmds]
Description:	Selects the protocol and speed the modem will attempt to connect at.
Command	Function
F0	Auto-detect the highest common connect speed.
F1	Select V.21 or Bell 103 at 300bps speed.
F3	Select V.23 at 75/1200bps speed.
F4	Select V.22 or Bell 212A at 1200bps speed.
F5	Select V.22bis at 2400bps speed.
F6	Select V.32/V.32bis at 4800bps speed.
F7	Select V.32bis at 7200bps speed.
F8	Select V.32/V.32bis at 9600bps speed.
F9	Select V.32bis at 12Kbps speed.
F10	Select V.32bis at 14.4Kbps speed

REMOTE ESCAPE CHARACTER
Type:	Register
Format	AT [cmds] S202=n [cmds]
Default:	Unidentified
Range:	Unidentified
Unit:	1 ASCII character
Description:	Selects a character to be used for escape sequences during remote configuration sessions.

REQUEST REMOTE CONFIGURATION
Type:	Immediate
Format:	AT [cmds] *R [cmds]
Description:	Requests a remote configuration session with the remote modem.

CALL REQUESTED NUMBER WITH IDENTIFICATION
Type:	Immediate
Format:	CRI<#>
Description:	Dials the number given. If supported, the modem’s identification string will be sent with the number.

EXECUTE AT COMMAND
Type:	Immediate
Format:	CNL[AT cmds]
Description:	Executes an AT command string.

IDENTIFICATION STRING
Type:	Configuration
Format:	AT [cmds] PRIxxxx [cmds]
Description:	Sets the modem’s identification string to xxxx.