WESTERN DIGITAL CORPORATION
PARADISE VGA PROFESSIONAL CARD
| 
 Category  | 
 Video  | 
| 
 Video Types Supported  | 
 XVGA  | 
| 
 Video Processor  | 
 WD PVGA1A  | 
| 
 Highest Resolution Supported  | 
 800 x 600  | 
| 
 Data Bus Type  | 
 16-bit ISA  | 
| 
 Memory Type  | 
 VRAM  | 
| 
 Maximum Onboard Memory  | 
 512KB  | 
| 
 CONNECTIONS  | |||
| 
 Purpose  | 
 Location  | 
 Location  | 
 Purpose  | 
| 
 15-pin analog video port  | 
 CN1  | 
 VGA feature connector  | 
 CN2  | 
| 
 MANUAL 16-BIT BIOS CONFIGURATION  | ||
| 
 Setting  | 
 W1  | |
| » | 
 Initial setup and normal operation  | 
 Closed  | 
| 
 16TEST program  | 
 Open  | |
| 
 Note:W1 should remain in the closed position unless the 16TEST program has been run and it recommends removing the jumper.  | ||
| 
 FEATURE CONNECTOR CLOCK CONFIGURATION  | ||
| 
 Setting  | 
 W2  | |
| » | 
 Enabled  | 
 Pins 1 & 2 closed  | 
| 
 Disabled  | 
 Pins 2 & 3 closed  | |
| 
 Note: When enabled, the feature connector supports 800 x 600 graphics and 132 column text modes but it does not provide full support of all signals on the video feature connector.  | ||
| 
 VGA MODE SWITCHING IMPLEMENTATION  | ||
| 
 Mode  | 
 SW1/2  | |
| » | 
 PS/2 style  | 
 On  | 
| 
 PC/AT style  | 
 Off  | |
| 
 AUTOSENSE CONFIGURATION  | ||
| 
 Mode  | 
 SW1/4  | |
| » | 
 Enabled autosense for 16-bit BIOS  | 
 On  | 
| 
 Autosense disabled, force 8-bit BIOS  | 
 Off  | |
| 
 FACTORY CONFIGURED - DO NOT ALTER  | |
| 
 Switch  | 
 Position  | 
| 
 SW1/3  | 
 Off  |