WESTERN DIGITAL CORPORATION
PARADISE PCI PLUS ACCELERATOR
| 
 Card Type  | 
 Video card  | 
| 
 Video Chip Set  | 
 Western Digital  | 
| 
 Maximum Video Memory  | 
 2MB DRAM  | 
| 
 Video Types Supported  | 
 VGA, XVGA  | 
| 
 Highest Resolution Supported  | 
 1024 x 768  | 
| 
 Data Bus  | 
 32-bit PCI  | 
| 
 CONNECTIONS  | |||
| 
 Function  | 
 Label  | 
 Function  | 
 Label  | 
| 
 Feature connector  | 
 CN1  | 
 15-pin analog video port  | 
 CN2  | 
| 
 USER CONFIGURABLE SETTINGS  | |||
| 
 Function  | 
 Label  | 
 Position  | |
| » | 
 Font selection - standard IBM fonts  | 
 JP45  | 
 Open  | 
| 
 Font selection - TUV fonts  | 
 JP45  | 
 Closed  | |
| » | 
 Configuration option  | 
 JP46  | 
 Closed  | 
| » | 
 Local bus timing is 2 clocks  | 
 JP47  | 
 Closed  | 
| 
 Local bus timing is 4 clocks  | 
 JP47  | 
 Open  | |
| » | 
 60Hz in mode 3, 12,, 5F  | 
 JP48  | 
 Closed  | 
| 
 72Hz in mode 3, 12,, 5F  | 
 JP48  | 
 Open  | |
| 
 Note: TUV is the German character spacing standard. There may be compatibility issues when using TUV with some DOS applications  | |||
| 
 RESOLUTION AND REFRESH SETTINGS - 800 X 600, 16 OR 256  | |||
| 
 Monitor Retrace Timings  | 
 JP41  | 
 JP42  | |
| » | 
 Vert: 56Hz, non-interlaced; Horiz: 35.3 kHz  | 
 Open  | 
 Open  | 
| 
 Vert: 72Hz, non-interlaced; Horiz: 48.2 kHz  | 
 Closed  | 
 Open  | |
| 
 Vert: 60Hz, non-interlaced; Horiz: 38.0 kHz  | 
 Open  | 
 Closed  | |
| 
 Vert: 56Hz, non-interlaced; Horiz: 35.3 kHz`  | 
 Closed  | 
 Closed  | |
| 
 RESOLUTION AND REFRESH SETTINGS - 1024 X 768  | |||
| 
 Monitor Retrace Timings  | 
 JP43  | 
 JP44  | |
| » | 
 Vert: 86.7Hz, interlaced; Horiz: 35.4 kHz  | 
 Open  | 
 Open  | 
| 
 Vert: 70Hz, non-interlaced; Horiz: 56.6 kHz  | 
 Closed  | 
 Open  | |
| 
 Vert: 60Hz, non-interlaced; Horiz: 48.5 kHz  | 
 Open  | 
 Closed  | |
| 
 Vert: 72Hz, non-interlaced; Horiz: 59.7 kHz  | 
 Closed  | 
 Closed  | |
| 
 MISCELLANEOUS TECHNICAL NOTES  | 
| 
 Note: The local bus timing is a "2 clocks" setting; for some motherboards, 2 clocks may not be sufficient to boot the system. To fix this problem, set the local bus timing to "4 clocks".  |