| SRDB
|
Synopsis
|
| 46001 |
Sun Enterprise[TM] 10000: SSP with IP address ending in .255 unable to issue basic commands |
| 44350 |
Sun Enterprise[TM] 10000: Reinstalling SSP software on SSP 3.4 and/or 3.5 |
| 42949 |
Sun Enterprise[TM] 10000: panic cannot allocate i/o mmu tsb arrays |
| 42207 |
Sun Enterprise[TM] 10000: Bringup fails with "Starting obp_helper
-m 40 -A -on... failed! (os status 0x100, exit code 1)" |
| 23210 |
Potential E10K domain outages with new centerplane |
| 22901 |
hpost failure: SysIO RAM Error |
| 22647 |
netcon_server fails to start after upgrade
to SSP 3.1.1: syslog: VerExec: ERR: VerExecApp.cc, 261: netcon_server error |
| 22228 |
The values of dr-max-mem from eeprom and the
kernel do not agree - why? |
| 22227 |
What is required to enable/disable DR for
each OS release? |
| 22221 |
I'm seeing GROW wakeups and SHRNK wakeups messages,
with references to DR. What are these? |
| 22011 |
client-server performance issues on E10K, EX500,
new O/S install |
| 21990 |
hpost failure - couldn't determine current
bus config |
| 21979 |
E10000 error during "boot net - install" -
krtld: error during initial load/link phase |
| 21028 |
hpost failure; ERR: libcbs:cbs_check_chain_length:libscan
error |
| 19476 |
Boot fails with "munged memory list" errors |
| 18562 |
Cannot connect to Starfire domain via netcon |
| 18561 |
starfire domain panics while booting "Couldn't
load stub module" |
| 18334 |
boot net fails on my E10K domain, but it used
to work fine |
| 18300 |
Troubleshooting hung E10K domains |
| 18060 |
How to backup and restore Alternate Pathing
databases |
| 18052 |
ld.so.1: dr_daemon: fatal: libap.so: open failed:
No such file or directory |
| 17954 |
Domain does not come up after reboot : "Cannot
read CBE information from snmpd." |
| 17782 |
cvcd uses up 100% of a CPU |
| 17623 |
Alternative procedure to set up and fail over
to a spare SSP. |
| 17574 |
Solaris 2.5.1 E10k domain fails to boot from
net: Error: Fast Data Access MMU Miss |
| 17493 |
Setting up E10000 Domain to Boot from Net |
| 16774 |
"/sbin/cvcd-(HOSTNAME:'domain'): lost data
output" error |
| 16764 |
netcon fails to get connected. |
| 16575 |
How to detach a system board with DR using
the command line interface |
| 16476 |
ether_hostton errors from cb_reset |
| 16446 |
apdb command fails with "Resource temporarily
unavailable" |
| 15584 |
cvcd loops when it cannot connect to the host
in /etc/ssphostname |
| 15198 |
XDB X.2 config failure if no IO module is present |
| 15704 |
Adding new meta disks to an existing array
on a E10000 |
