[HR]

OpenVMS System Manager's Manual

Previous | Contents

J

Job banner pages
- See also File banner pages
$JOB card
Job controllers
- and batch jobs
- communication with queue manager
- relationship to queue manager #1
- relationship to queue manager #2
- See also JOBCTL process
- See also Queue managers
- starting queue manager #1
- starting queue manager #2
- tasks performed by
Job retention
Job scheduling #1
Job scheduling #2
- priority
  - See Priority, job scheduling #1
  - See Priority, job scheduling #2
  - See Priority, job scheduling #3
Job status
Job table quota
JOBCTL process
- creation during system startup
- See also Job controllers
Jobs
- changing scheduling priority
- controlling print position and alignment #1
- controlling print position and alignment #2
- deleting
- holding #1
- holding #2
- merging
- modifying
- moving from one queue to another
- releasing
- retaining in a queue
- See also Batch jobs
- See also Output jobs
- suspending
Journal file of queue database
- location #1
- location #2
- location #3
- See also Queue database
JTQUOTA process quota

K

Kernel mode
Key processes
- definition
Keypad definitions #1
Keypad definitions #2
Kits
- See Software products
Known file lists
- definition
- in system startup
Known images

L

Labels
- backup tape
- changing volume
- header
- initializing volume to write
- trailer
LAN Auxiliary Control Program (LANACP) utility
- OPCOM messages displayed
- running
- servers
- stopping
LAN Control Program (LANCP) utility
- clearing counters
- deleting device information
- deleting node information
- device database management
- device management
- disabling MOP downline load service
- displaying device information
- displaying node information
- displaying OPCOM messages
- displaying status and counters #1
- displaying status and counters #2
- enabling MOP downline load service
- Load Trace facility
- MOP console carrier
- MOP downline load service management
- MOP trigger boot
- node database management
- running
- setting device information
- setting node information
- setting up LAN MOP
- SPAWN function
- using command files
LAN drivers
- addresses
- Ethernet
- FDDI
- port
- protocol type
- Token Ring
LAN emulation over ATM
- device drivers
LANACP utility
- See LAN Auxiliary Control Program utility
LANCP utility
- See LAN Control Program (LANCP) utility
Languages
- formats
- specifying #1
- specifying #2
- specifying #3
LANs
- using multiple LAN adapters for LAT node
LANs (local area networks)
- clearing counters
- deleting device information
- deleting node information
- device management
- disabling MOP downline load service
- displaying device information
- displaying LAN device configurations
- displaying LAN device parameters
- displaying node information
- displaying OPCOM messages
- displaying status and counters #1
- displaying status and counters #2
- enabling MOP downline load service
- LAN Auxiliary Control Program (LANACP) utility
- LAN Control Program (LANCP) utility
- LAN firmware updates
- LAN MOP and DECnet MOP
- LANACP related OPCOM messages
- LANCP command files
- LANCP SPAWN function
- Load Trace facility
- migrating DECnet MOP to LAN MOP
- MOP console carrier
- MOP downline load service
- MOP trigger boot
- node database management
- sample LAN MOP setup
- See also MOP downline load service management
- setting device information
- setting LAN device parameters
- setting node information
- setting up LAN MOP with CLUSTER_CONFIG
- system management enhancements
LASTport Control Program (LASTCP) utility
- command summary
LASTport/Disk
- protocol
- service
LASTport/Disk service
- ESS$DADDRIVER
LASTport/Tape
- protocol
- service
LASTport/Tape service
- ESS$MADDRIVER
LAT Ancillary Control Process (LATACP)
LAT$CONFIG.COM command procedure
- invoking during system startup
LAT Control Program (LATCP) utility #1
LAT Control Program (LATCP) utility #2
- DELETE QUEUE_ENTRY command
- exiting
- features
- invoking
LAT Control Program (LATCP) utility
- /[NO]ANNOUNCEMENTS qualifier
- /[NO]LARGE_BUFFER qualifier
LAT Control Program (LATCP) utility
- queuing incoming requests
- SET NODE command
- SET SERVICE command
- setting up limited services
- SHOW QUEUE_ENTRY command
- SHOW SERVICE command
- summary of commands
LAT server
LAT software
- advantages and uses
- application programs
- creating a service
- customizing
- disabling service announcements
- enabling outgoing connections
- load balancing #1
- load balancing #2
- managing the database size
- modems
- outgoing connections #1
- outgoing connections #2
- outgoing connections #3
- printers
  - autostart queues on #1
  - autostart queues on #2
  - increasing availability of #1
  - increasing availability of #2
  - LATSYM symbiont #1
  - LATSYM symbiont #2
  - PRTSMB symbiont
  - sample configuration
  - setting up
  - spooling
  - troubleshooting
- queuing incoming requests
- service
  - announcements #1
  - announcements #2
  - database
  - dedicated applications
  - defined #1
  - defined #2
  - node #1
  - node #2
  - node #3
  - remote printing
- setting up limited services
- setting up ports
- starting network in command procedure #1
- starting network in command procedure #2
- starting with LAT$STARTUP.COM #1
- starting with LAT$STARTUP.COM #2
- starting with LAT$STARTUP.COM #3
- terminals #1
- terminals #2
  - determining characteristics of
  - disconnecting
- using large buffers
- using multiple LAN adapters
LAT$STARTUP.COM command procedure #1
LAT$STARTUP.COM command procedure #2
- invoking during system startup
LAT$SYSTARTUP.COM command procedure #1
LAT$SYSTARTUP.COM command procedure #2
LAT$SYSTARTUP.COM command procedure #3
LAT$SYSTARTUP.COM command procedure #4
- example
- invoking during system startup
LATSYM symbiont #1
LATSYM symbiont #2
Layered products
- startup database #1
- startup database #2
- startup phases
Layered software installation
Lexical functions
- F$GETJPI
- F$GETQUI
- F$GETSYI
- getting information about queues
- getting information about vector processing
LIBDECOMP.COM command procedure
License database
- logical name defining location
LICENSE MODIFY command
Licenses
- loading
  - in system startup
Line printers
- preparing for UETP #1
- preparing for UETP #2
- preparing for UETP #3
- testing with UETP
- UETP output
- UETP test image #1
- UETP test image #2
Lines
- overflow
  - controlling
- TCP/IP
  - connecting hosts
LINK command
- /SELECTIVE_SEARCH qualifier
Link state routing
Linkable images
Linker utility
- linking against SYS.STB
List operations
- with BACKUP
LM$JOURNAL file type
LMF$LICENSE logical name
- defining during system startup
LMF (License Management Facility)
- description of
- starting
Load balancing
- using LAT software #1
- using LAT software #2
LOAD command
- in SYSGEN (VAX)
Load leveling
- dynamic
Load tests
- defining user load for UETP
- description
- error during UETP
- running individually
Load Trace facility
Loading device drivers
- automatically #1
- automatically #2
- manually
  - on VAX
LOADS logical name
Local Area Network Auxiliary Control Program
- See LAN Auxiliary Control Program utility
Local area networks
- See LANs #1
- See LANs #2
- See LANs #3
Local identifiers
Local network data
- accessing
Local page and swap files
- installing with SATELLITE_PAGE.COM procedure #1
- installing with SATELLITE_PAGE.COM procedure #2
Location
- of page file #1
- of page file #2
  - specifying alternate
- of queue database #1
- of queue database #2
- of swap file
  - specifying alternate
- of system dump file
Log files
- generated by UETP
- moving to reduce system disk I/O
- operator
- security audit
  - creating new version
  - reviewing
Logging in
Logging out
- using command procedure
- while using VMSINSTAL.COM command procedure
Logging startup
- with SYSMAN
Logical name tables
- definition
Logical names
- ACCOUNTNG
- AGEN$FEEDBACK_REQ_TIME
- assigning for shareable images
- assigning systemwide in system startup
- assigning to customize the SHUTDOWN.COM procedure
- assigning to devices
- for software product installations
- for system components
  - recommended privilege mode
- LMF$LICENSE
- NET$ENTITY-NAME_STARTUP
- NET$IGNORE_DECNET
- NET$STARTUP_MOP
- NET$STARTUP_QUIET_NCL
- NETNODE_REMOTE
- NETPROXY
- overriding source and destination locations
- privilege modes #1
- privilege modes #2
- QMAN$MASTER #1
- QMAN$MASTER #2
- redefining location of system files
- RIGHTSLIST
- SHOW_CLUSTER$INIT
- SHUTDOWN$DECNET_MINUTES
- SHUTDOWN$DISABLE_AUTOSTART #1
- SHUTDOWN$DISABLE_AUTOSTART #2
- SHUTDOWN$INFORM_NODES #1
- SHUTDOWN$INFORM_NODES #2
- SHUTDOWN$MINIMUM_MINUTES
- SHUTDOWN$QUEUE_MINUTES
- SHUTDOWN$TIME
- SHUTDOWN$VERBOSE
- specifying as mail addresses
- STARTUP$STARTUP_LAYERED
- STARTUP$STARTUP_VMS
- SYS$ANNOUNCE
- SYS$AUDIT_SERVER_INHIBIT #1
- SYS$AUDIT_SERVER_INHIBIT #2
- SYS$DECDTM_INHIBIT
- SYS$ERRORLOG
- SYS$JOURNAL
- SYS$MONITOR
- SYS$STARTUP
- SYS$SYLOGIN
- SYS$WELCOME
- SYSUAF
- translation of
- trusted
- UAFALTERNATE
- used by UETP
  - CTRLNAME
  - LOADS
  - SYS$INPUT
  - SYS$OUTPUT
- using in SYSMAN
- VMSMAIL_PROFILE
Logical queues
- assigning
- description
- recommended use #1
- recommended use #2
Login command procedures
- booting without
- defining announcements in
- defining location of during system startup
- definition #1
- definition #2
- for captive account
  - sample
- for SYSTEM account
- in SYSMAN
- individual #1
- individual #2
  - sample
- LOGIN.COM
- SYLOGIN.COM
- systemwide #1
- systemwide #2
  - sample
- user-specified
- when errors prevent you from logging in
Logins
- controlling number of dialup attempts
- restricting by function
- restricting by time #1
- restricting by time #2
- sequence of events
LOGOUT command
Logout command procedures
- LOGOUT command
- SYLOGOUT.COM
Long report format
- See Console report during UETP
Lost files
- recovering #1
- recovering #2
LPBEGIN phase of system startup
LPBETA phase of system startup
LPMAIN phase of system startup
LTAn devices
LTDRIVER (LAT port driver)
- turning on and off

Previous | Next | Contents | [Home] | [Comments] | [Ordering info] | [Help]

[HR]

  6017PI05.HTM
  OSSG Documentation
  22-NOV-1996 14:23:19.59

Copyright © Digital Equipment Corporation 1996. All Rights Reserved.