/* * Copyright (C) 2003-2015 FreeIPMI Core Team * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #ifndef IPMI_COMP_CODE_SPEC_H #define IPMI_COMP_CODE_SPEC_H #ifdef __cplusplus extern "C" { #endif #define IPMI_COMP_CODE_COMMAND_SUCCESS 0x00 #define IPMI_COMP_CODE_COMMAND_SUCCESS_STR \ "Command Completed Normally." #define IPMI_COMP_CODE_NODE_BUSY 0xC0 #define IPMI_COMP_CODE_NODE_BUSY_STR \ "Node Busy. Command could not be processed because command " \ "processing resources are temporarily unavailable." #define IPMI_COMP_CODE_INVALID_COMMAND 0xC1 #define IPMI_COMP_CODE_INVALID_COMMAND_STR \ "Invalid Command. Used to indicate an unrecognized or unsupported command." #define IPMI_COMP_CODE_COMMAND_INVALID_FOR_LUN 0xC2 #define IPMI_COMP_CODE_COMMAND_INVALID_FOR_LUN_STR \ "Command invalid for given LUN." #define IPMI_COMP_CODE_COMMAND_TIMEOUT 0xC3 #define IPMI_COMP_CODE_COMMAND_TIMEOUT_STR \ "Timeout while processing command. Response unavailable." #define IPMI_COMP_CODE_OUT_OF_SPACE 0xC4 #define IPMI_COMP_CODE_OUT_OF_SPACE_STR \ "Out of space. Command could not be completed because of a " \ "lack of storage space required to execute the given command " \ "operation." #define IPMI_COMP_CODE_RESERVATION_CANCELLED 0xC5 #define IPMI_COMP_CODE_RESERVATION_CANCELLED_STR \ "Reservation Canceled or Invalid Reservation ID." #define IPMI_COMP_CODE_INVALID_RESERVATION_ID IPMI_COMP_CODE_RESERVATION_CANCELLED #define IPMI_COMP_CODE_INVALID_RESERVATION_ID_STR IPMI_COMP_CODE_RESERVATION_CANCELLED_STR #define IPMI_COMP_CODE_REQUEST_DATA_TRUNCATED 0xC6 #define IPMI_COMP_CODE_REQUEST_DATA_TRUNCATED_STR \ "Request data truncated." #define IPMI_COMP_CODE_REQUEST_DATA_LENGTH_INVALID 0xC7 #define IPMI_COMP_CODE_REQUEST_DATA_LENGTH_INVALID_STR \ "Request data length invalid." #define IPMI_COMP_CODE_REQUEST_DATA_LENGTH_LIMIT_EXCEEDED 0xC8 #define IPMI_COMP_CODE_REQUEST_DATA_LENGTH_LIMIT_EXCEEDED_STR \ "Request data field length limit exceeded." #define IPMI_COMP_CODE_PARAMETER_OUT_OF_RANGE 0xC9 #define IPMI_COMP_CODE_PARAMETER_OUT_OF_RANGE_STR \ "Parameter out of range. One or more parameters in the data " \ "field of the Request are out of range. This is different from " \ "'Invalid data field' (CCh) code in that it indicates that the " \ "erroneous field(s) has a contiguous range of possible values." #define IPMI_COMP_CODE_CANNOT_RETURN_REQUESTED_NUMBER_OF_BYTES 0xCA #define IPMI_COMP_CODE_CANNOT_RETURN_REQUESTED_NUMBER_OF_BYTES_STR \ "Cannot return number of requested data bytes." #define IPMI_COMP_CODE_REQUESTED_SENSOR_DATA_OR_RECORD_NOT_PRESENT 0xCB #define IPMI_COMP_CODE_REQUESTED_SENSOR_DATA_OR_RECORD_NOT_PRESENT_STR \ "Requested Sensor, data, or record not present." #define IPMI_COMP_CODE_INVALID_DATA_FIELD_IN_REQUEST 0xCC #define IPMI_COMP_CODE_INVALID_DATA_FIELD_IN_REQUEST_STR \ "Invalid data field in Request" #define IPMI_COMP_CODE_COMMAND_ILLEGAL_FOR_SENSOR_OR_RECORD_TYPE 0xCD #define IPMI_COMP_CODE_COMMAND_ILLEGAL_FOR_SENSOR_OR_RECORD_TYPE_STR \ "Command illegal for specified sensor or record type." #define IPMI_COMP_CODE_COMMAND_RESPONSE_COULD_NOT_BE_PROVIDED 0xCE #define IPMI_COMP_CODE_COMMAND_RESPONSE_COULD_NOT_BE_PROVIDED_STR \ "Command response could not be provided." #define IPMI_COMP_CODE_CANNOT_EXECUTE_DUPLICATE_REQUEST 0xCF #define IPMI_COMP_CODE_CANNOT_EXECUTE_DUPLICATE_REQUEST_STR \ "Cannot execute duplicated request. This completion code is " \ "for devices which cannot return the response that was returned " \ "for the original instance of the request. Such devices should " \ "provide separate commands that allow the completion status of " \ "the original request to be determined. An Event Receiver does not " \ "use this completion code, but returns the 00h completion code in " \ "the response to (valid) duplicated requests." #define IPMI_COMP_CODE_SDR_REPOSITORY_IN_UPDATE_MODE 0xD0 #define IPMI_COMP_CODE_SDR_REPOSITORY_IN_UPDATE_MODE_STR \ "Command response could not be provided. SDR Repository in " \ "update mode." #define IPMI_COMP_CODE_DEVICE_IN_FIRMWARE_UPDATE_MODE 0xD1 #define IPMI_COMP_CODE_DEVICE_IN_FIRMWARE_UPDATE_MODE_STR \ "Command response could not be provided. Device in firmware " \ "update mode." #define IPMI_COMP_CODE_BMC_INITIALIZATION_IN_PROGRESS 0xD2 #define IPMI_COMP_CODE_BMC_INITIALIZATION_IN_PROGRESS_STR \ "Command response could not be provided. BMC initialization or " \ "initialization agent in progress." #define IPMI_COMP_CODE_DESTINATION_UNAVAILABLE 0xD3 #define IPMI_COMP_CODE_DESTINATION_UNAVAILABLE_STR \ "Destination unavailable. Cannot deliver request to selected " \ "destination. E.g. this code can be returned if a request message " \ "is targeted to SMS, but receive message queue reception is disabled " \ "for the particular channel." #define IPMI_COMP_CODE_INSUFFICIENT_PRIVILEGE_LEVEL 0xD4 #define IPMI_COMP_CODE_INSUFFICIENT_PRIVILEGE_LEVEL_STR \ "Cannot execute command due to insufficient privilege level or other " \ "security-based restriction (e.g. disabled for 'firmware firewall')." #define IPMI_COMP_CODE_REQUEST_PARAMETER_NOT_SUPPORTED 0xD5 #define IPMI_COMP_CODE_REQUEST_PARAMETER_NOT_SUPPORTED_STR \ "Cannot execute command. Command, or request parameter(s), not " \ "supported in present state." #define IPMI_COMP_CODE_REQUEST_PARAMETER_ILLEGAL 0xD6 #define IPMI_COMP_CODE_REQUEST_PARAMETER_ILLEGAL_STR \ "Cannot execute command. Parameter is illegal because command " \ "sub-function has been disabled or is unavailable " \ "(e.g. disabled for 'firmware firewall')." #define IPMI_COMP_CODE_UNSPECIFIED_ERROR 0xFF #define IPMI_COMP_CODE_UNSPECIFIED_ERROR_STR \ "Unspecified error." /* DEVICE-SPECIFIC (OEM) CODES 01h-7Eh This range is used for command-specific codes that are also specific for a particular device and version. A-priori knowledge of the device command set is required for interpretation of these codes. */ /* COMMAND-SPECIFIC CODES 80h-BEh 80h-BEh Standard command-specific codes. This range is reserved for command-specific completion codes for commands specified in this document. */ /* * IPMI Device "Global Commands" */ /* IPMI_CMD_SET_COMMAND_ENABLES */ #define IPMI_COMP_CODE_SET_COMMAND_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND 0x80 #define IPMI_COMP_CODE_SET_COMMAND_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND_STR \ "attempt to enable an unsupported or un-configurable command" /* IPMI_CMD_SET_COMMAND_SUB_FUNCTION_ENABLES */ #define IPMI_COMP_CODE_SET_COMMAND_SUB_FUNCTION_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND 0x80 #define IPMI_COMP_CODE_SET_COMMAND_SUB_FUNCTION_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND_STR \ "attempt to enable an unsupported or un-configurable command" /* IPMI_CMD_GET_COMMAND_SUB_FUNCTION_ENABLES */ #define IPMI_COMP_CODE_GET_COMMAND_SUB_FUNCTION_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND 0x80 #define IPMI_COMP_CODE_GET_COMMAND_SUB_FUNCTION_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND_STR \ "attempt to enable an unsupported or un-configurable command" /* * BMC Watchdog Timer Commands */ /* IPMI_CMD_RESET_WATCHDOG_TIMER */ #define IPMI_COMP_CODE_RESET_WATCHDOG_TIMER_ATTEMPT_TO_START_UNINITIALIZED_WATCHDOG 0x80 #define IPMI_COMP_CODE_RESET_WATCHDOG_TIMER_ATTEMPT_TO_START_UNINITIALIZED_WATCHDOG_STR \ "Attempt to start un-initialized watchdog." /* * BMC Device and Messaging Commands */ /* IPMI_CMD_GET_MESSAGE */ #define IPMI_COMP_CODE_GET_MESSAGE_DATA_NOT_AVAILABLE 0x80 #define IPMI_COMP_CODE_GET_MESSAGE_DATA_NOT_AVAILABLE_STR \ "data not available (queue/buffer empty)" /* IPMI_CMD_SEND_MESSAGE */ #define IPMI_COMP_CODE_SEND_MESSAGE_INVALID_SESSION_HANDLE 0x80 #define IPMI_COMP_CODE_SEND_MESSAGE_INVALID_SESSION_HANDLE_STR \ "Invalid Session Handle. The session handle does not match up with any " \ "currently active sessions for this channel." #define IPMI_COMP_CODE_SEND_MESSAGE_LOST_ARBITRATION 0x81 #define IPMI_COMP_CODE_SEND_MESSAGE_LOST_ARBITRATION_STR \ "Lost Arbitration" #define IPMI_COMP_CODE_SEND_MESSAGE_BUS_ERROR 0x82 #define IPMI_COMP_CODE_SEND_MESSAGE_BUS_ERROR_STR \ "Bus Error" #define IPMI_COMP_CODE_SEND_MESSAGE_NAK_ON_WRITE 0x83 #define IPMI_COMP_CODE_SEND_MESSAGE_NAK_ON_WRITE_STR \ "NAK on Write" /* IPMI_CMD_MASTER_WRITE_READ */ #define IPMI_COMP_CODE_MASTER_WRITE_READ_LOST_ARBITRATION 0x81 #define IPMI_COMP_CODE_MASTER_WRITE_READ_LOST_ARBITRATION_STR \ "Lost Arbitration" #define IPMI_COMP_CODE_MASTER_WRITE_READ_BUS_ERROR 0x82 #define IPMI_COMP_CODE_MASTER_WRITE_READ_BUS_ERROR_STR \ "Bus Error" #define IPMI_COMP_CODE_MASTER_WRITE_READ_NAK_ON_WRITE 0x83 #define IPMI_COMP_CODE_MASTER_WRITE_READ_NAK_ON_WRITE_STR \ "NAK on Write" #define IPMI_COMP_CODE_MASTER_WRITE_READ_TRUNCATED_READ 0x84 #define IPMI_COMP_CODE_MASTER_WRITE_READ_TRUNCATED_READ_STR \ "Truncated Read" /* IPMI_CMD_SET_SYSTEM_INFO_PARAMETERS */ #define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." #define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_INVALID_SET_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_INVALID_SET_IN_PROGRESS_STR \ "attempt to set the 'set in progress' value (in parameter #0) " \ "when not int the 'set complete' state." #define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_WRITE_READ_ONLY_PARAMETER 0x82 #define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_WRITE_READ_ONLY_PARAMETER_STR \ "attempt to write read-only parameter" #define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_READ_WRITE_ONLY_PARAMETER 0x83 #define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_READ_WRITE_ONLY_PARAMETER_STR \ "attempt to read write-only parameter" /* IPMI_CMD_GET_SYSTEM_INFO_PARAMETERS */ #define IPMI_COMP_CODE_GET_SYSTEM_INFO_PARAMETERS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_GET_SYSTEM_INFO_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." /* IPMI_CMD_GET_SESSION_CHALLENGE */ #define IPMI_COMP_CODE_GET_SESSION_CHALLENGE_INVALID_USERNAME 0x81 #define IPMI_COMP_CODE_GET_SESSION_CHALLENGE_INVALID_USERNAME_STR \ "Invalid user name" #define IPMI_COMP_CODE_GET_SESSION_CHALLENGE_NULL_USERNAME_NOT_ENABLED 0x82 #define IPMI_COMP_CODE_GET_SESSION_CHALLENGE_NULL_USERNAME_NOT_ENABLED_STR \ "Null user name (User 1) not enabled" /* IPMI_CMD_ACTIVATE_SESSION */ #define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SESSION_SLOT_AVAILABLE 0x81 #define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SESSION_SLOT_AVAILABLE_STR \ "No session slot available (BMC cannot accept any more sessions)" #define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SLOT_AVAILABLE_FOR_GIVEN_USER 0x82 #define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SLOT_AVAILABLE_FOR_GIVEN_USER_STR \ "No slot available for given user. (Limit of user sessions " \ "allowed under that name has been reached)" #define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SLOT_AVAILABLE_TO_SUPPORT_USER 0x83 #define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SLOT_AVAILALBE_TO_SUPPORT_USER_STR \ "No slot available to support user due to maximum privilege " \ "capability. (An implementation may only be able to support " \ "a certain number of sessions based on what authentication " \ "resources are required. For example, if User Level " \ "Authentication is disabled, an implementation may be able " \ "to allow a larger number of users that are limited to User " \ "Level privilege, than users that require higher privilege." #define IPMI_COMP_CODE_ACTIVATE_SESSION_SESSION_SEQ_NUM_OUT_OF_RANGE 0x84 #define IPMI_COMP_CODE_ACTIVATE_SESSION_SESSION_SEQ_NUM_OUT_OF_RANGE_STR \ "Session sequence number out-of-range" #define IPMI_COMP_CODE_ACTIVATE_SESSION_INVALID_SESSION_ID 0x85 #define IPMI_COMP_CODE_ACTIVATE_SESSION_INVALID_SESSION_ID_STR \ "Invalid session ID in request" #define IPMI_COMP_CODE_ACTIVATE_SESSION_EXCEEDS_PRIVILEGE_LEVEL 0x86 #define IPMI_COMP_CODE_ACTIVATE_SESSION_EXCEEDS_PRIVILEGE_LEVEL_STR \ "Requested maximum privilege level exceeds user and/or " \ "channel privilege limit" /* IPMI_CMD_SET_SESSION_PRIVILEGE_LEVEL */ #define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_REQUESTED_LEVEL_NOT_AVAILABLE_FOR_USER 0x80 #define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_REQUESTED_LEVEL_NOT_AVAILABLE_FOR_USER_STR \ "Requested level not available for this user" #define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_REQUESTED_LEVEL_EXCEEDS_USER_PRIVILEGE_LIMIT 0x81 #define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_REQUESTED_LEVEL_EXCEEDS_USER_PRIVILEGE_LIMIT_STR \ "Requested level exceeds Channel and/or User Privilege Limit" #define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_CANNOT_DISABLE_USER_LEVEL_AUTHENTICATION 0x82 #define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_CANNOT_DISABLE_USER_LEVEL_AUTHENTICATION_STR \ "Cannot disable User Level authentication" /* IPMI_CMD_CLOSE_SESSION */ #define IPMI_COMP_CODE_CLOSE_SESSION_INVALID_SESSION_ID_IN_REQUEST 0x87 #define IPMI_COMP_CODE_CLOSE_SESSION_INVALID_SESSION_ID_IN_REQUEST_STR \ "Invalid session ID in request" /* IPMI_CMD_SET_CHANNEL_ACCESS */ #define IPMI_COMP_CODE_SET_CHANNEL_ACCESS_SET_NOT_SUPPORTED_ON_SELECTED_CHANNEL 0x82 #define IPMI_COMP_CODE_SET_CHANNEL_ACCESS_SET_NOT_SUPPORTED_ON_SELECTED_CHANNEL_STR \ "set not supported on selected channel" #define IPMI_COMP_CODE_SET_CHANNEL_ACCESS_ACCESS_MODE_NOT_SUPPORTED 0x83 #define IPMI_COMP_CODE_SET_CHANNEL_ACCESS_ACCESS_MODE_NOT_SUPPORTED_STR \ "access mode not supported" /* IPMI_CMD_GET_CHANNEL_ACCESS */ #define IPMI_COMP_CODE_GET_CHANNEL_ACCESS_COMMAND_NOT_SUPPORTED_FOR_SELECTED_CHANNEL 0x82 #define IPMI_COMP_CODE_GET_CHANNEL_ACCESS_COMMAND_NOT_SUPPORTED_FOR_SELECTED_CHANNEL_STR \ "command not supported for selected channel" /* IPMI_CMD_SET_USER_PASSWORD_COMMAND */ #define IPMI_COMP_CODE_SET_USER_PASSWORD_COMMAND_PASSWORD_TEST_FAILED_PASSWORD_SIZE_CORRECT 0x80 #define IPMI_COMP_CODE_SET_USER_PASSWORD_COMMAND_PASSWORD_TEST_FAILED_PASSWORD_SIZE_CORRECT_STR \ "password test failed. Password size correct, but password " \ "data does not match stored value." #define IPMI_COMP_CODE_SET_USER_PASSWORD_COMMAND_PASSWORD_TEST_FAILED_PASSWORD_SIZE_INCORRECT 0x81 #define IPMI_COMP_CODE_SET_USER_PASSWORD_COMMAND_PASSWORD_TEST_FAILED_PASSWORD_SIZE_INCORRECT_STR \ "password test failed. Wrong password size was used." /* IPMI_CMD_ACTIVATE_PAYLOAD */ #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_ALREADY_ACTIVE_ON_ANOTHER_SESSION 0x80 #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_ALREADY_ACTIVE_ON_ANOTHER_SESSION_STR \ "Payload already active on another session" #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_TYPE_IS_DISABLED 0x81 #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_TYPE_IS_DISABLED_STR \ "Payload type disabled. Given payload type is not configured " \ "to be enabled for activation." #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_ACTIVATION_LIMIT_REACHED 0x82 #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_ACTIVATION_LIMIT_REACHED_STR \ "Payload activation limit reached. Cannot activate given payload type " \ "because the maximum number of simultaneous instances of that payload type " \ "are already running." #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_CANNOT_ACTIVATE_PAYLOAD_WITH_ENCRYPTION 0x83 #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_CANNOT_ACTIVATE_PAYLOAD_WITH_ENCRYPTION_STR \ "Cannot activate payload with encryption." #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_CANNOT_ACTIVATE_PAYLOAD_WITHOUT_ENCRYPTION 0x84 #define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_CANNOT_ACTIVATE_PAYLOAD_WITHOUT_ENCRYPTION_STR \ "Cannot activate payload without encryption. BMC requires encryption " \ "for all payloads for given privilege level." /* IPMI_CMD_DEACTIVATE_PAYLOAD */ #define IPMI_COMP_CODE_DEACTIVATE_PAYLOAD_PAYLOAD_ALREADY_DEACTIVATED 0x80 #define IPMI_COMP_CODE_DEACTIVATE_PAYLOAD_PAYLOAD_ALREADY_DEACTIVATED_STR \ "Payload already deactivated" #define IPMI_COMP_CODE_DEACTIVATE_PAYLOAD_PAYLOAD_TYPE_IS_DISABLED 0x81 #define IPMI_COMP_CODE_DEACTIVATE_PAYLOAD_PAYLOAD_TYPE_IS_DISABLED_STR \ "Payload type disabled. Given payload type is not configured " \ "to be enabled for activation." /* IPMI_CMD_GET_CHANNEL_PAYLOAD_VERSION */ #define IPMI_COMP_CODE_GET_CHANNEL_PAYLOAD_VERSION_PAYLOAD_TYPE_NOT_AVAILABLE_ON_GIVEN_CHANNEL 0x80 #define IPMI_COMP_CODE_GET_CHANNEL_PAYLOAD_VERSION_PAYLOAD_TYPE_NOT_AVAILABLE_ON_GIVEN_CHANNEL_STR \ "Payload type not available on given channel" /* IPMI_CMD_GET_CHANNEL_OEM_PAYLOAD_INFO */ #define IPMI_COMP_CODE_GET_CHANNEL_OEM_PAYLOAD_INFO_OEM_PAYLOAD_IANA_OR_PAYLOAD_ID_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_GET_CHANNEL_OEM_PAYLOAD_INFO_OEM_PAYLOAD_IANA_OR_PAYLOAD_ID_NOT_SUPPORTED_STR \ "OEM Payload IANA and/or Payload ID not supported" /* IPMI_CMD_SUSPEND_RESUME_PAYLOAD_ENCRYPTION */ #define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_OPERATION_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_OPERATION_NOT_SUPPORTED_STR \ "Operation not supported for given payload type." #define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_OPERATION_NOT_ALLOWED_UNDER_PRESENT_CONFIGURATION 0x81 #define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_OPERATION_NOT_ALLOWED_UNDER_PRESENT_CONFIGURATION_STR \ "Operation now allowed under present configuration for given payload type." #define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_ENCRYPTION_IS_NOT_AVAILABLE_FOR_SESSION 0x82 #define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_ENCRYPTION_IS_NOT_AVAILABLE_FOR_SESSION_STR \ "Encryption is not available for session that payload type is active under." #define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_PAYLOAD_INSTANCE_NOT_PRESENTLY_ACTIVE 0x83 #define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_PAYLOAD_INSTANCE_NOT_PRESENTLY_ACTIVE_STR \ "The payload instance is not presently active." /* IPMI_CMD_SET_CHANNEL_SECURITY_KEYS */ #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_CANNOT_PERFORM_SET_CONFIRM_KEY_IS_LOCKED 0x80 #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_CANNOT_PERFORM_SET_CONFIRM_KEY_IS_LOCKED_STR \ "Cannot perform set/confirm. Key is locked" #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_INSUFFICIENT_KEY_BYTES 0x81 #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_INSUFFICIENT_KEY_BYTES_STR \ "insufficient key bytes" #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_TOO_MANY_KEY_BYTES 0x82 #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_TOO_MANY_KEY_BYTES_STR \ "too many key bytes" #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_KEY_VALUE_DOES_NOT_MEET_CRITERIA 0x83 #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_KEY_VALUE_DOES_NOT_MEET_CRITERIA_STR \ "key value does not meet criteria for specified type of key" #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_KR_IS_NOT_USED 0x84 #define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_KR_IS_NOT_USED_STR \ "K_R is not used. BMC uses a random number generation approach " \ "that does not require a K_R value" /* * Chassis Device Commands */ /* IPMI_CMD_SET_SYSTEM_BOOT_OPTIONS */ #define IPMI_COMP_CODE_SET_BOOT_OPTIONS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_SET_BOOT_OPTIONS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." #define IPMI_COMP_CODE_SET_BOOT_OPTIONS_INVALID_SET_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_SET_BOOT_OPTIONS_INVALID_SET_IN_PROGRESS_STR \ "attempt to set the 'set in progress' value (in parameter #0) " \ "when not int the 'set complete' state." #define IPMI_COMP_CODE_SET_BOOT_OPTIONS_WRITE_READ_ONLY_PARAMETER 0x82 #define IPMI_COMP_CODE_SET_BOOT_OPTIONS_WRITE_READ_ONLY_PARAMETER_STR \ "attempt to write read-only parameter" #define IPMI_COMP_CODE_SET_BOOT_OPTIONS_READ_WRITE_ONLY_PARAMETER 0x83 #define IPMI_COMP_CODE_SET_BOOT_OPTIONS_READ_WRITE_ONLY_PARAMETER_STR \ "attempt to read write-only parameter" /* IPMI_CMD_GET_SYSTEM_BOOT_OPTIONS */ #define IPMI_COMP_CODE_GET_BOOT_OPTIONS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_GET_BOOT_OPTIONS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." /* * Event Commands */ /* * PEF and Alerting Commands */ /* IPMI_CMD_SET_PEF_CONFIGURATION_PARAMETERS */ #define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." #define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS_STR \ "attempt to set the 'set in progress' value (in parameter #0) " \ "when not int the 'set complete' state." #define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER 0x82 #define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER_STR \ "attempt to write read-only parameter" #define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER 0x83 #define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER_STR \ "attempt to read write-only parameter" /* IPMI_CMD_GET_PEF_CONFIGURATION_PARAMETERS */ #define IPMI_COMP_CODE_GET_PEF_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_GET_PEF_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." /* IPMI_CMD_SET_LAST_PROCESSED_EVENT_ID */ #define IPMI_COMP_CODE_SET_LAST_PROCESSED_EVENT_ID_SEL_ERASE_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_SET_LAST_PROCESSED_EVENT_ID_SEL_ERASE_IN_PROGRESS_STR \ "cannot execute command, SEL erase in progress" /* IPMI_CMD_GET_LAST_PROCESSED_EVENT_ID */ #define IPMI_COMP_CODE_GET_LAST_PROCESSED_EVENT_ID_SEL_ERASE_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_GET_LAST_PROCESSED_EVENT_ID_SEL_ERASE_IN_PROGRESS_STR \ "cannot execute command, SEL erase in progress" /* IPMI_CMD_ALERT_IMMEDIATE */ #define IPMI_COMP_CODE_ALERT_ALREADY_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_ALERT_ALREADY_IN_PROGRESS_STR \ "Alert Immediate rejected due to alert already in progress" #define IPMI_COMP_CODE_ALERT_IPMI_MESSAGING_SESSION_ACTIVE 0x82 #define IPMI_COMP_CODE_ALERT_IPMI_MESSAGING_SESSION_ACTIVE_STR \ "Alert Immediate rejected due to IPMI messaging session active on this channel" /* * Sensor Device Commands */ /* IPMI_CMD_SET_SENSOR_READING_AND_EVENT_STATUS */ #define IPMI_COMP_CODE_SENSOR_READING_OR_STATUS_NOT_SETTABLE 0x80 #define IPMI_COMP_CODE_SENSOR_READING_OR_STATUS_NOT_SETTABLE_STR \ "Attempt to change reading or set or clear status bits that " \ "are not settable via this command" #define IPMI_COMP_CODE_EVENT_DATA_BYTES_NOT_SETTABLE 0x81 #define IPMI_COMP_CODE_EVENT_DATA_BYTES_NOT_SETTABLE_STR \ "Attempted to set Event Data Bytes, but setting Event Data Bytes is not " \ "supported for this sensor." /* * FRU Device Commands */ /* IPMI_CMD_READ_FRU_DATA */ #define IPMI_COMP_CODE_READ_FRU_DATA_FRU_DEVICE_BUSY 0x81 #define IPMI_COMP_CODE_READ_FRU_DATA_FRU_DEVICE_BUSY_STR \ "FRU device busy. The requested cannot be completed because the " \ "implementation of the logical FRU device is in a state where the FRU " \ "information is temporarily unavailable. This could be due to a " \ "condition such as a loss of arbitration if the FRU is implemented as a " \ "device on a shared bus." /* IPMI_CMD_WRITE_FRU_DATA */ #define IPMI_COMP_CODE_WRITE_FRU_DATA_WRITE_PROTECTED_OFFSET 0x80 #define IPMI_COMP_CODE_WRITE_FRU_DATA_WRITE_PROTECTED_OFFSET_STR \ "write-protected offset. Cannot complete write because one or more " \ "bytes of FRU data are to a write-protected offset in the FRU device. " \ "Note that an implementation may have allowed a 'partial write' of the " \ "data to occur." #define IPMI_COMP_CODE_WRITE_FRU_DATA_FRU_DEVICE_BUSY 0x81 #define IPMI_COMP_CODE_WRITE_FRU_DATA_FRU_DEVICE_BUSY_STR \ "FRU device busy. The requested cannot be completed because the " \ "implementation of the logical FRU device is in a state where the FRU " \ "information is temporarily unavailable. This could be due to a " \ "condition such as a loss of arbitration if the FRU is implemented as a " \ "device on a shared bus." /* * SDR Device Commands */ /* * SEL Device Commands */ /* IPMI_CMD_GET_SEL_ENTRY */ #define IPMI_COMP_CODE_GET_SEL_ENTRY_SEL_ERASE_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_GET_SEL_ENTRY_SEL_ERASE_IN_PROGRESS_STR \ "cannot execute command, SEL erase in progress" /* IPMI_CMD_DELETE_SEL_ENTRY */ #define IPMI_COMP_CODE_DELETE_SEL_ENTRY_SEL_OPERATION_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_DELETE_SEL_ENTRY_SEL_OPERATION_NOT_SUPPORTED_STR \ "Operation not supported for this Record Type" #define IPMI_COMP_CODE_DELETE_SEL_ENTRY_SEL_ERASE_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_DELETE_SEL_ENTRY_SEL_ERASE_IN_PROGRESS_STR \ "cannot execute command, SEL erase in progress" /* * LAN Device Commands */ /* IPMI_CMD_SET_LAN_CONFIGURATION_PARAMETERS */ #define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." #define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS_STR \ "attempt to set the 'set in progress' value (in parameter #0) " \ "when not int the 'set complete' state." #define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER 0x82 #define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER_STR \ "attempt to write read-only parameter" #define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER 0x83 #define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER_STR \ "attempt to read write-only parameter" /* IPMI_CMD_GET_LAN_CONFIGURATION_PARAMETERS */ #define IPMI_COMP_CODE_GET_LAN_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_GET_LAN_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." /* * Serial/Modem Device Commands */ /* IPMI_CMD_SET_SERIAL_MODEM_CONFIGURATION */ #define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." #define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_INVALID_SET_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_INVALID_SET_IN_PROGRESS_STR \ "attempt to set the 'set in progress' value (in parameter #0) " \ "when not int the 'set complete' state." #define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_WRITE_READ_ONLY_PARAMETER 0x82 #define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_WRITE_READ_ONLY_PARAMETER_STR \ "attempt to write read-only parameter" #define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_READ_WRITE_ONLY_PARAMETER 0x83 #define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_READ_WRITE_ONLY_PARAMETER_STR \ "attempt to read write-only parameter" /* IPMI_CMD_GET_SERIAL_MODEM_CONFIGURATION */ #define IPMI_COMP_CODE_GET_SERIAL_MODEM_CONFIGURATION_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_GET_SERIAL_MODEM_CONFIGURATION_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." /* IPMI_CMD_SET_SOL_CONFIGURATION_PARAMETERS */ #define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." #define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS 0x81 #define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS_STR \ "attempt to set the 'set in progress' value (in parameter #0) " \ "when not int the 'set complete' state." #define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER 0x82 #define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER_STR \ "attempt to write read-only parameter" #define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER 0x83 #define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER_STR \ "attempt to read write-only parameter" /* IPMI_CMD_GET_SOL_CONFIGURATION_PARAMETERS */ #define IPMI_COMP_CODE_GET_SOL_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED 0x80 #define IPMI_COMP_CODE_GET_SOL_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \ "parameter not supported." /* * Bridge Management Commands (ICMB) */ /* * Discovery Commands (ICMB) */ /* * Bridging Commands (ICMB) */ /* * Event Commands (ICMB) */ /* * OEM Commands for Bridge NetFN */ /* * OEM Bridge Commands */ #define IPMI_COMP_CODE_GENERIC_COMPLETION_CODES_MIN 0xC0 #define IPMI_COMP_CODE_GENERIC_COMPLETION_CODES_MAX 0xFF #define IPMI_COMP_CODE_GENERIC_COMPLETION_CODES(__comp_code) \ (((__comp_code) == IPMI_COMP_CODE_COMMAND_SUCCESS \ || ((__comp_code) >= IPMI_COMP_CODE_GENERIC_COMPLETION_CODES_MIN \ && (__comp_code) <= IPMI_COMP_CODE_GENERIC_COMPLETION_CODES_MAX)) ? 1 : 0) #define IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES_MIN 0x01 #define IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES_MAX 0x7E #define IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES(__comp_code) \ (((__comp_code) >= IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES_MIN \ && (__comp_code) <= IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES_MAX) ? 1 : 0) #define IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES_MIN 0x80 #define IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES_MAX 0xBE #define IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES(__comp_code) \ (((__comp_code) >= IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES_MIN \ && (__comp_code) <= IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES_MAX) ? 1 : 0) #ifdef __cplusplus } #endif #endif /* IPMI_COMP_CODE_SPEC_H */