Installing the Adaptec SCSI Card 39160 as the Primary Host Adapter and Novell
NetWare 3.12 or 3.2 for the first time.

Note: The Adaptec SCSI Card 29160 uses the same driver, and the same procedure
for installation.

1.	Create the DOS partition and/or install DOS from the Setup diskette. 
2.	Install "CD-ROM drivers on a DOS bootable diskette or hard disk drive
	as described in ReadDOS.HTM on the driver diskette.
3.	Start the Novell NetWare 3.12 installation 
4.	After Novell NetWare installs the DOS portion of the software,
	DOWN and EXIT to DOS from the server prompt. 
5.	Copy the ADPT160m.HAM and ADPT160m.DDI from the Ultra 160 Family
	Manager Set NetWare directory to the C:\server.312
	directory. 
6.	You may also choose to download the file U160NW.EXE. 
7.	Obtain the NWPA_UP.EXE patch from the Novell Web site at
	http://developer.novell.com/devres/sas/certinfo.htm
8.	Change directory to c:\server.312, and copy the patch file
	NWPA_UP.EXE to the directory. 
9.	Execute NWPA_UP.EXE (note: this will create another file,
	312PTD.EXE. Answer 'Y' to the prompt to overwrite
	CDROM.NLM.) 
10.	Execute 312PTD.EXE. 
11.	Create the directory c:\server.312\CDSAVE 
12.	Copy CDROM.NLM to c:\server.312\CDSAVE 
13.	Update the server with the following commands, from the DOS
	prompt:

		c:\server.312\312PTD\native\loader\lswap
		c:\server.312\312PTD\native\loader\loader.exe
		c:\server.312\server.exe 

14.	Start Server.EXE. Type in your server name and IPX address 
15.	From the console prompt, type:

		load c:\server.312\312PTD\native\start\npapatch 
		load c:\server.312\mmattrfx 
		load c:\server.312\nbi31x 
		load c:\server.312\ADPT160m 
		load c:\server.312\ADPT160m
		
		(The driver must be loaded for each channel on the 39160. The 29160
		is a single channel card, so the driver only needs to be loaded once.)

16.	Note the slot number detected for the SCSI Card 39160 adapter. This
	will be added to the Startup.ncf load ADPT160m statement to
	automate driver load using the parameter SLOT=x (x is the
	detected slot number). 
17.	Load Install. Create the Novell NetWare partition, SYS volume,
	and mount the volume. Complete the installation of the System
	and Public Files.
18.	Create the Autoexec.NCF file. Add the following lines and save:

		load after311

		(if the CD-ROM is EIDE/ATAPI, add the following lines) 
		search add 1 c:\server.312\cdsave 
		load cdrom 

19.	Create the Startup.NCF file.  Edit the ADPT160m command lines to
	add the slot number.  Delete the MEM and INT parameters in the
	command line. 

	EXAMPLE:
		load c:\server.312\ADPT160m Slot=2 

20.	Load, from the console prompt, the following command 

	load c:\server.312\312PTD\patch312 

21.	Install the patches from the c:\server.312\312PTD directory when
	prompted for a path. 
22.	DOWN and EXIT the server 
23.	Run Server.EXE
24.	Install recommended/required updates from Novell.
25.	Installation of the SCSI Card 39160 for Novell NetWare is
	complete.