| InfoDoc
|
Synopsis
|
| 50061 |
Sun Enterprise[TM] 10000: Using find command to clean up SSP files |
41703 |
Sun Enterprise[TM] 10000: How to boot a domain from the network |
| 41246 |
Booting a domain from the primary ssp's cdrom. |
| 41244 |
Steps for un-hanging Sun Enterprise (TM) 10000
domain. |
| 24929 |
E10K - Solaris 2.6 to 2.7 upgrade may hang |
| 23571 |
Compatibility for E10K System Board 501-5693 |
| 22650 |
Configuring netcon logging on the SSP? |
| 22273 |
Dynamic Reconfiguration(DR) with Solaris 2.6
KU-20 |
| 22162 |
Can proctool be run on E10k's? |
| 22158 |
Detecting a system board's memory and i/o
board configuration on a running E10k domain |
| 22156 |
Sun Enterprise[TM] 3x00 - 10000: Is there any way
to identify the CPU types (333/400-4/400-8)? |
| 22150 |
How to create an AP network device |
| 22145 |
Sun Enterprise[TM] 10000: Sample steps to troubleshoot the host reset dump
file |
| 21628 |
SSP Software Versions |
| 20902 |
Procedure to change the domain name on E10000 |
| 20823 |
Information about hangs on E10k systems due
to disabling of Intimate Shared Memory (ISM) in /etc/system or Oracle's
init.ora file |
| 20291 |
Tips and gotchas installing or upgrading to
SSP 3.1.1 |
| 19997 |
Procedure to change E10K control board IP
addresses |
| 19897 |
How to run hpost on E10000 system board with
no I/O configured |
| 19650 |
how can one tell if a mezzanine board is installed
on the system board |
| 19453 |
How to determine E10000 system board type |
| 18486 |
How to enable Memory ECC error reporting on Starfire[TM] by default |
| 18452 |
How to create and convert a backup SSP |
| 18117 |
Configuring an extra hub for network installation
of Sun Enterprise[TM] 10000 |
| 17382 |
Configuring 336-MHz CPU into a Sun Enterprise Ultra[TM] E10000 |
| 16970 |
Clearing Shared Memory |
| 16745 |
Xpdat:- Starfire POST Dump Analyses Tool |
| 16610 |
Upgrade SSP software from 3.0 to 3.1 |
| 16510 |
How to tell the revision of SSP software |
| 16483 |
How to change the IP Address of a E10000 Control
Board |
| 16372 |
Installing Clustered E10000 (Starfire[TM]) |
| 15786 |
How to log what gets typed at a netcon session |
| 15600 |
Changing the path to the boot disk on a STARFIRE
without AP installed |
| 15206 |
E10000[TM] Correctable Error reporting not enabled
by default |
| 15093 |
torque specs for UE10000 - Sun Enterprise 10000[TM] |
| 15092 |
creating an eeprom.image file on UE10000 - Sun Enterprise 10000[TM] |
| 15058 |
Creating meta-network device on UE10000 - Sun Enterprise 10000[TM] |
| 15055 |
Sun Enterprise[TM] 10000: Creating a domain from the command line |
| 15054 |
SSP Environment Variables |
| 15053 |
UE10000 - Sun Enterprise 10000[TM] - Related OBP Variables |
| 15051 |
Decoding a Processor number on UE10000 |
| 15050 |
Decoding sbus number on UE10000 |
