This cable can be used to connect to network interface cards (with AUI connector) together, without use of transcievers.
(To network interface card 1)
(To network interface card 2)
15 PIN D-SUB MALE to network interface card 1.
15 PIN D-SUB MALE to network interface card 2.
|TxD A||3||5||RxD A|
|RxD A||5||3||TxD A|
|TxD B||10||12||RxD B|
|RxD B||12||10||TxD B|
And make the following jumper at each end:
|Collision Detect B||9|
|Source:||Usenet posting by Andrew J V Yeomans|
Copyright © The Hardware Book Team 1996-2004.
May be copied and redistributed, partially or in whole, as appropriate.
Document last modified: 2002-01-10