GoTo ConnectorCONNECTORGoTo Main

ATA (44) Internal

ATA=AT bus Attachment.

This connector is mostly used for 2.5" internal harddisks.
See ATA for pin 1-40.

44 PIN IDC (0.75") MALE (at the controller & peripherals)
44 PIN IDC (0.75") FEMALE (at the cable)

44 PIN IDC (0.75") MALE at the controller & peripherals.
44 PIN IDC (0.75") FEMALE at the cable.

Pin Name Dir Description
41 +5VL --> +5 VDC (Logic)
42 +5VM --> +5 VDC (Motor)
43 GND --- Ground
44 /TYPE --> Type (0=ATA)

Note: Direction is Controller relative Devices (harddisks).

Contributor: Joakim Ögren, Nick Schirmer
Source: ?

Copyright © The Hardware Book Team 1996-2004.
May be copied and redistributed, partially or in whole, as appropriate.
Document last modified: 2002-01-13