S T 3 2 5 3 2 A M E D A L I . 2 5 3 2 SEAGATE Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 4956| 619| 1024 Capacity form/unform 2557/ MB Heads 6| 16| | 16 Seek time / track 13.0/ 3.0 ms Sector/track | 63| 63| 63 Controller IDE / ATA3 ULTRA Precompensation Cache/Buffer 128 KB Landing Zone Data transfer rate 10.000 MB/S int Bytes/Sector 512 33.300 MB/S ext UDMA Recording method RLL 1/7,ZBR 2/3 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C | Power: sleep W Humidity % | standby 1.0 W Altitude km | idle 4.8 W Shock g 5 | 75 seek 6.6 W Rotation RPM 4500 read/write W Acoustic dBA spin-up W ECC Bit MTBF h 300000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** SEAGATE ST32532A JUMPER SETTING +---------------------------------------------------------+ | |XX | |XXI | |XXN | |XXT | |XXE | |XXR | |XXF | |XXA | |XXC | 1XXE | |+-+ | || |Jumper | |+-+1 | +-+ |XX Power | +-+ |XX +---------------------------------------------------------+ 12V ********************************************************************** J U M P E R S ********************************************************************** SEAGATE ST32532A JUMPER SETTING REAR VIEW J2 40 pin I/O Cable Connection | pin-20 removed | +----------+---------+-----1-+---------+ TOP HDA -+::::::::::*::::::::1| : : : | 0 0 0 0 +-- +--------------------+-+-+-+-+-5-G-G-12+ BOTTOM | | | Master ON, Slave OFF --+ | | Slave Present (when Master ON) ----+ | Cable Select (when Slave OFF) ----+ | Reserved ------+ o o1 o o2 | | Limit capacity to 2.1 Gbytes ---+ | (4092 cylinders) | Full capacity (as shipped) -----+ Limit Capacity jumper sets the default cylinder translation to 4092 to solve issues with certain BIOS that only auto-detect. Total available sectors are still at full capacity as reported via Identify Drive data words 52 - 61. Third party partitioning software may be needed to achieve full capacity if this option jumper is used.