COMPUTER MODULES, INC.

BBU-IR1, BBU-IR5

Card Type

Battery pack

I/O Options

DC power out

Data Bus

N/A (see technical note)

CONNECTIONS

Function

Label

Function

Label

9V DC power out to Turbodisc

P4

Battery test switch

SW1

BATTERIES

Power

Bank 0

Bank 1

Bank 2

Bank 3

Bank 4

500mAh

(6) 1.5V AA

NONE

NONE

NONE

NONE

1000mAh

(6) 1.5V AA

(6) 1.5V AA

NONE

NONE

NONE

1500mAh

(6) 1.5V AA

(6) 1.5V AA

(6) 1.5V AA

NONE

NONE

2000mAh

(6) 1.5V AA

(6) 1.5V AA

(6) 1.5V AA

(6) 1.5V AA

NONE

2500mAh

(6) 1.5V AA

(6) 1.5V AA

(6) 1.5V AA

(6) 1.5V AA

(6) 1.5V AA

Note: Ni-cad batteries must be used. If other types of batteries are used the hardware or batteries could be damaged.

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

LED1

Green

On

Board has sufficient charge to power Turbodisc

LED1

Green

Off

Board does not have sufficient charge to power Turbodisc

LED2

Green

On

Batteries are receiving power from Turbodisc AC adapter for charging

LED2

Green

Off

Batteries are not receiving power from Turbodisc AC adapter for charging

Note: These LEDs will only function when the battery test switch is pushed.

MISCELLANEOUS TECHNICAL NOTES

This card has no connectors on its card edge. It can therefore be installed in any 16-bit format card slot. It provides battery backup power for the Computer Modules, Inc. Turbodisc, document number V2116.